TinyMight / TM 2

[Dr. G]

• 18650batterystore.com This is my store of choice...and I just get my Legacy Pro ones from their site. I finally did put batteries in my Angus.
• Did our TM2 come with a battery? I don't remember...anyway, happy Sunday everyone. I am very happy I have my TM1.5 and TM 2 right now. They look really nice with the stems and mouthpiece from Rogue.

 

[kiddvudu2]

• 18650batterystore.com This is my store of choice...and I just get my Legacy Pro ones from their site. I finally did put batteries in my Angus.
• Did our TM2 come with a battery? I don't remember...anyway, happy Sunday everyone. I am very happy I have my TM1.5 and TM 2 right now. They look really nice with the stems and mouthpiece from Rogue.

Can't wait to receive mine! It moved to completed status yesterday. Saturday! Very cool. Warehouse fairies must be kicking it into high gear for holiday season.

 

[BabyFacedFinster]

Just ordered a pair of p28a molicels and a charger. Just another accessory into the money pit. Don't tell my wife.

 

[babyskunk]

What are the screens that come with the TM2 (in the brown paper bag with o-rings and the basket screen)? The website makes it sound like they're for the CUs, but they're a little big I think.

 

[SquirrelMaster]

I am her biggest fan and have a few of her leather cases...I love them. I am talking about a case where a few stems can travel, and a small container of herb. That kinda of thing...I don't want it to be seen.


Purple heart waitlist? I am unsure what that is @SquirrelMaster please let me know and thanks.

As @Abele Rizieri Ferrari Saud, it's a waitlist for when they launch a Tinymight2 made of purple heart. This may happen sometime before the end of the year if all goes according to plan. Anyone interested just needs to send an email to info@tinymightvape.com

 

[onesixty2]

Finally got around to using my tm2 with some concentrate and I'm still just continuously satisfied with this little unit.

https://theroguewaxworks.com/products/2x-vape-cotton?_pos=1&_sid=6b4037e58&_ss=r using the cellucotton from here made a little ball surrounding my crumble, put it in a wpa with a glass screen just to avoid dealing with it snagging on the screen and boiled at 10. Good stuff, very, very high and zero cleanup. The cotton wasn't burnt at all, stained from the crumble but perfectly intact.

 

[Dr. G]

As @Abele Rizieri Ferrari Saud, it's a waitlist for when they launch a Tinymight2 made of purple heart. This may happen sometime before the end of the year if all goes according to plan. Anyone interested just needs to send an email to info@tinymightvape.com

Thank you for the temp guide that is in your signature...I really appreciate that!

 

[Momor]

What screens do/would you use in order to secure balls/beads/pearls in a TM stem ?
The ones from TRWW I've seen recommended here seems perfect but I'm in EU and would prefer to order from here.
(I know I can use the empty halves of the CU but want to use just screens). TIA

 

[kiddvudu2]

How often does the TM stock refresh over at highartisan's shop? (I thought I read a reply about this in the past few days, but I've been busy reading as much of this thread as possible, and couldn't relocate it with a few searches).

 

[Shit Snacks]

How often does the TM stock refresh over at highartisan's shop? (I thought I read a reply about this in the past few days, but I've been busy reading as much of this thread as possible, and couldn't relocate it with a few searches).

I'm pretty on top of this thread, the drops seem pretty much random?

 

[kiddvudu2]

I'm pretty on top of this thread, the drops seem pretty much random?

Cool. I signed up for his mailing list, is that a good indicator in order not to be caught sleeping and miss out on the next drop? I'm also tuning into this thread regularly. My tracking number for the TM2 is now showing as "on the way".

 

[Shit Snacks]

Cool. I signed up for his mailing list, is that a good indicator in order not to be caught sleeping and miss out on the next drop? I'm also tuning into this thread regularly. My tracking number for the TM2 is now showing as "on the way".

I have no idea, I got my stem just from seeing there was a new drop here then going there to order it... I don't really enjoy mine much though, much prefer my good vibes boro stems personally

 

[kiddvudu2]

I have no idea, I got my stem just from seeing there was a new drop here then going there to order it... I don't really enjoy mine much though, much prefer my good vibes boro stems personally

Those are mostly sold out too. Do I remember something in this thread about contacting that seller directly? Or do we wait for an announcement here for the next drop of those as well?

 

[badbee]

I have no idea, I got my stem just from seeing there was a new drop here then going there to order it... I don't really enjoy mine much though, much prefer my good vibes boro stems personally

Those others seem to be popular, what do you like most about the GVB stems?

 

[Shit Snacks]

Those are mostly sold out too. Do I remember something in this thread about contacting that seller directly? Or do we wait for an announcement here for the next drop of those as well?

Yeah he also does drops, that sell out quick, follow on Instagram to get the most up-to-date news for both GVB and Rogue... Yes you can contact directly, messaging here on FC, or faster if you message on IG, but you can also email too!

Those others seem to be popular, what do you like most about the GVB stems?

I think HA is popular because they are cheaper and were more readily available previously and had easier international shipping built into the website they were using... Some people have posted that they have both and still like HA, or have others and still like HA, but for me the quality of the glass and the work cannot really compare to GVB, and I think the pearls are more effective than the pills at cooling

 

[XiniX]

Aloha,

Reporting back after first 10 days of TM2.
Initially I was very happy on my unit, producing lots of vapour. About after 1 battery cycle, the vapour started to drop until now it is less than my OG Mighty.

I have fiddled with oven size, bowl load, starting temperature, draw speed and tried al possible combo's of CU and rimless screen.

I only notice to get more vapour when I pull very hard. This makes me think I have a leak somewhere. Abv turns browns slowly. I reinstalled all loose parts ( metal tube, o-rings, both screw on tops,... to no avail.
I also tried 3 other new (moli)cells.

And only once I got huge clouds at setting 5. The herbs is the same batch since the first day I have my unit.

Should I consider calibrating? Other advice or parameters I might need to tune in?

I have read the 60 last pages here and looked on Reddit too before posting.
I quit combustion finally and I need my TM2 to work (better).

Peace

 

[Abele Rizieri Ferrari]

Aloha,

Reporting back after first 10 days of TM2.
Initially I was very happy on my unit, producing lots of vapour. About after 1 battery cycle, the vapour started to drop until now it is less than my OG Mighty.

I have fiddled with oven size, bowl load, starting temperature, draw speed and tried al possible combo's of CU and rimless screen.

I only notice to get more vapour when I pull very hard. This makes me think I have a leak somewhere. Abv turns browns slowly. I reinstalled all loose parts ( metal tube, o-rings, both screw on tops,... to no avail.
I also tried 3 other new (moli)cells.

And only once I got huge clouds at setting 5. The herbs is the same batch since the first day I have my unit.

Should I consider calibrating? Other advice or parameters I might need to tune in?

I have read the 60 last pages here and looked on Reddit too before posting.
I quit combustion finally and I need my TM2 to work (better).

Peace

Check the oring seal for the stem

 

[Tweakz]

Aloha,

Reporting back after first 10 days of TM2.
Initially I was very happy on my unit, producing lots of vapour. About after 1 battery cycle, the vapour started to drop until now it is less than my OG Mighty.

I have fiddled with oven size, bowl load, starting temperature, draw speed and tried al possible combo's of CU and rimless screen.

I only notice to get more vapour when I pull very hard. This makes me think I have a leak somewhere. Abv turns browns slowly. I reinstalled all loose parts ( metal tube, o-rings, both screw on tops,... to no avail.
I also tried 3 other new (moli)cells.

And only once I got huge clouds at setting 5. The herbs is the same batch since the first day I have my unit.

Should I consider calibrating? Other advice or parameters I might need to tune in?

I have read the 60 last pages here and looked on Reddit too before posting.
I quit combustion finally and I need my TM2 to work (better).

Peace

You can step up at setting 10 and you get some chick clouds

Also you can try a boost mod. You just need to start your TM in session mode , and then press and hold the button (while in session mode) for several seconds or until you see milk on your bong ( be careful , this boost mode can combustion )

 

[dzoinp]

Also you can try a boost mod. You just need to start your TM in session mode

The tm2 has a boost mode in on demand mode. just select the max temp, the led turns white and you are in concentrated mode.

@XiniX

I only notice to get more vapour when I pull very hard

What stem are you using? won't it be blocked?
How does it behave at max temp? (white led)

 

[oneness]

are there any original TM accessories worth getting? like the WPA in 14 or 18mm or 3D stem?

 

[sickmanfraud]

are there any original TM accessories worth getting? like the WPA in 14 or 18mm or 3D stem?

I enjoy the 3D stem and I use the adjustable WPA quite a bit.

 

[GoldenBud]

are there any original TM accessories worth getting? like the WPA in 14 or 18mm or 3D stem?

WPA 14/18 (multi) + 3D stem too

 

[oneness]

is it better to get the variable WPA compared to just the 14mm or 18mm? I don't have a bong yet so this is something I have to buy and I can choose between a 14 or 18mm one. I have heard that 18mm is better for more airflow (which I get would not be possible if you get the variable WPA adapter)

 

[GoldenBud]

is it better to get the variable WPA compared to just the 14mm or 18mm? I don't have a bong yet so this is something I have to buy and I can choose between a 14 or 18mm one. I have heard that 18mm is better for more airflow (which I get would not be possible if you get the variable WPA adapter)

the multi is better also because you can't push the conical screen too deep, there's a glass screen too, i really like it
long sessions, slow draw, at 5 with the TM is my favorite now.. so tasty

 

[Abele Rizieri Ferrari]

I prefer dedicated size wpa. My preference is 18mm because that pairs with most my glass and (another directly or via dropdown). If I wouldn't have a preferred size, I'd get the 14mm one because the 14 to 18 mm adapter is not at all intrusive.