thank you for trying it out! how did you load it into the stem? I wonder how it is possible that such tiny amount can stay in the stem without falling out? did you put a screen at the end of the stem so it can't fall out?
TinyMight / TM 2
- Thread starter kuzko
- Start date
GoldenBud
Well-Known Member
scooped the TM's WPA with the BCG in a way that very little material will get inside... well it worked and it was a pretty long session, dark ABV! it's fun to use like this, I am keeping it at 7 now, this way saves material for sure...
ChipNJ
Well-Known Member
Been being lazy lately and using my Mighty+, remember I like pre-loading dosing caps and having 5/6 strains to pick from, but my wife was out with friends today and I pulled out the TM2. OMG now I remember why it is better to not be lazy, three vapes from a rimmed screen at 4 on my TM2 that I already hit at 2 and 3. Still probably another session at 5 later tonight. WOW. My brother is coming over for Thanksgivings, I plan to give him my TM1, he already has my Mighty.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
This is why you keep the TM upside down, do not flip it the other way, use it on a hook or other glass or water piece, as GB said
Don’t forget TM has their own version of dosing caps!
SquirrelMaster
Well-Known Member
Are you on the purpleheart waitlist?
Dr. G
***Old Resident*** Vapman Collector
I am her biggest fan and have a few of her leather cases...I love them. I am talking about a case where a few stems can travel, and a small container of herb. That kinda of thing...I don't want it to be seen.
Purple heart waitlist? I am unsure what that is @SquirrelMaster please let me know and thanks.
Abele Rizieri Ferrari
Well-Known Member
I love my setup with the gvb stem so much <3
The ergonomics are just so much more comfortable to me than a hook. And the cooling is almost as effective. With the low temps i'm riding it's just perfect. I go from 0 to 1 in 3-4 hits and it gets me nicely medicated already. Then another 7-8 hits from 1 to 4.5 maybe 5. Avb is really bright still. TM2 is such a kick ass low temp extractor, I never imagined a flavor geared session could pack such a punch
Before launch some prototypes were shown, I believe an oak one as well as the PH one. The PH got some enthousiast response and the maker communicated that the PH will most likely come to fruition. So some people asked if there'd be a list to be put on it.
The ergonomics are just so much more comfortable to me than a hook. And the cooling is almost as effective. With the low temps i'm riding it's just perfect. I go from 0 to 1 in 3-4 hits and it gets me nicely medicated already. Then another 7-8 hits from 1 to 4.5 maybe 5. Avb is really bright still. TM2 is such a kick ass low temp extractor, I never imagined a flavor geared session could pack such a punch
Before launch some prototypes were shown, I believe an oak one as well as the PH one. The PH got some enthousiast response and the maker communicated that the PH will most likely come to fruition. So some people asked if there'd be a list to be put on it.
FelixVonTrapp
Well-Known Member
Does UK count as Europe for your needs? Vapefiend has the high artisan pill stem
Tinymight Terp Pill 3D Cooling Stem by Glass Charlie
Tinymight cooling stem with 3 terp pills. The stem is 12cm in length. 2 x rimless basket screens includedPictured left-right: Atomic Stardust (UV), Amber, Purple Lollipop, NP, Red Elvis
Notcoded419
Well-Known Member
They're the 3mm. They did seem to be a slight improvement on the CU, at least on flavor.
The bottom part with the screen? How'd you get them in there? That's where they're currently stuck, in the holes at the top of that lower screen unit.
Still working fine though.
I advise you to contact Woodyvapors (DE) on instagram who makes great ones!
sickmanfraud
Well-Known Member
There is one in the FC classifieds
Dr. G
***Old Resident*** Vapman Collector
Thank you for the information. I appreciate that you explained it. Thank you.I love my setup with the gvb stem so much <3
The ergonomics are just so much more comfortable to me than a hook. And the cooling is almost as effective. With the low temps i'm riding it's just perfect. I go from 0 to 1 in 3-4 hits and it gets me nicely medicated already. Then another 7-8 hits from 1 to 4.5 maybe 5. Avb is really bright still. TM2 is such a kick ass low temp extractor, I never imagined a flavor geared session could pack such a punch
Before launch some prototypes were shown, I believe an oak one as well as the PH one. The PH got some enthousiast response and the maker communicated that the PH will most likely come to fruition. So some people asked if there'd be a list to be put on it.
kiddvudu2
Well-Known Member
Hey all, I did search the thread on this and found a few replies that helped me, but before I purchase some spare batteries, could somebody please send me a pic of a real P28a battery so I know the one I purchase is legit? I found "molicel p28a" and "p26a" as being recommended, so I've searched Amazon and also batteries.com. I think I've found a match, but they look generic.
Thx!
Thx!
Don't buy batteries on Amazon. They are often rewraps. You should buy from a trusted seller only. Here are some good vendors recommend by Mooch:
- 18650.uk
- 18650batterystore.com
- akkuteile.de
- ecoluxshopdirect.co.uk
- fogstar.co.uk
- illumn.com
- imrbatteries.com
- liionwholesale.com
- orbtronic.com
kiddvudu2
Well-Known Member
I'm finding the "Molicel P28A 18650 2800mAh 35A Battery" for only $4.99 USD at 18650batterystore.com. Does that sound right? Seems too cheap to me.
Sounds about right to me. I think I paid exactly that. Although I would also shop around. Some of the stores really get you on shipping.
kiddvudu2
Well-Known Member
After shopping those sites, I paid $15.86 for 2 batteries including shipping from 18650batterysales.com.
Thanks for the help @Grass Yes !!
Vaporific
All who wander are not lost...
18650batterystore.com had a sale recently in the Molicel p28a’s. They’re cheaper than p26’s usually. A very good price right now. I’ve only used p26’a for my TM (and P80) but I hear p28’s work well too. I’ve bought batteries from this site and one of the others listed above. I would only buy from any of those sites listed.
I have a new screen in my new TRWW long dimpled chill pill stem ready for launch and its maiden voyage. Sunday is about to get funner
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Yeah so I think that is too small for cooling beads, not enough air flow through them, and yeah I guess they got stuck haha I discovered 4 mm minimum, and like I said mixing with 6 mm gives a good mix of the flow pattern for me, good luck gettin em out
Edit: these should work as 18 mm WPA for the TM btw:
For Sale - (EU) 2 x RBT Rastabuddhatao stem from my Milaana 2 - 9 Euro each
https://ibb.co/RSGjK8S To sell i have 2 RBT stems from my already sold Milaana 2 18 euro both + shipping costs - only EU please
fuckcombustion.com
Last edited:
Photonic
Lesser-Known Lurker
Yep, got my pair of extra P28a there too. Went smoothly. Picked up a Xtar VC2SL on Amazon to charge them.
Abysmal Vapor
Supersniffer 2000 - robot fart detection device
Hey guys ! Been having some conversation with TM guys and we scratched on the BF sales topic,while they admit they cannot offer any crazy discounts like the retailers,who have small number of units in stock and wont suffer as much. They wanted to do a small gesture and show their appreciation to our community !
Use code : freeship with any TM2 order to enable free shipping
!
Cheers !
Use code : freeship with any TM2 order to enable free shipping
!Cheers !