Abele Rizieri Ferrari
Well-Known Member
I have had multiple scares where I had to resort to the FAQ to find out much to my relief that I hadn't bricked the unit tbh
TinyMight / TM 2
- Thread starter kuzko
- Start date
WisePenny
unknown. unmember.
It is probably also worth mentioning that the TM site is up for pre-order, much like the TM1 almost always was. . .
Estimation of deliveries: from 28th of September
Dr. G
Vapman Collector*Vapman Beta Tester
I did. I reread it this morning. I saw it. Thank you. I did not see it the first time around. Thanks.
Vaporific
All who wander are not lost...
GoldenBud
Well-Known Member
TM1 7.5 slow draw.. great taste and hits really nice..around 0.1gr~
sickmanfraud
Well-Known Member
My TM2 has landed!!
Like everyone else, I am majorly impressed.
Since so many of you reviewed the TM2 I figure I should mention 2 accessories that I purchased.
The long cooling stem with the blue beads is an improvement in my opinion. Cooler vapor. I wonder if it would be better with 5 beads per section rather than the 3. Cooling is noticeable. I wouldn't tell anyone who already has a 3-d cooling stem to get the new one, but it is an improvement.
I bought the dosing capsules. I believe that they are a major improvement. The first gen dosing caps had a lid that fit over the capsule. In order for the V.1 capsule lid to fit made the capsule body with the cannabis is looser in the stem.
The V. 2 capsule features a lid that fits without any overhang so airflow goes over the cannabis.
I expect that the tighter fit will combine with the Titanium stem to create a hybrid effect which I think I will like in the evenings.
I will report back on the combo of the new dosing capsules and the Titanium stem.
Like everyone else, I am majorly impressed.
Since so many of you reviewed the TM2 I figure I should mention 2 accessories that I purchased.
The long cooling stem with the blue beads is an improvement in my opinion. Cooler vapor. I wonder if it would be better with 5 beads per section rather than the 3. Cooling is noticeable. I wouldn't tell anyone who already has a 3-d cooling stem to get the new one, but it is an improvement.
I bought the dosing capsules. I believe that they are a major improvement. The first gen dosing caps had a lid that fit over the capsule. In order for the V.1 capsule lid to fit made the capsule body with the cannabis is looser in the stem.
The V. 2 capsule features a lid that fits without any overhang so airflow goes over the cannabis.
I expect that the tighter fit will combine with the Titanium stem to create a hybrid effect which I think I will like in the evenings.
I will report back on the combo of the new dosing capsules and the Titanium stem.
DaVapeGuy
Well-Known Member
How are the dosing caps in general for the TM?
From what I read on here almost no one uses them
sickmanfraud
Well-Known Member
When I am not home I like the convenience. To me, the convenience is worth the "extra heat" or extra time needed to extract my medicine and any possible loss of flavor.
As an experiment, I just vaped one capsule in the glass stem and got total extraction at temp 6.
EarthworldTim
Well-Known Member
Never had a TM before but this TM2 is very impressive. The only thing holding me back previously was the somewhat fragile build but this thing feels super solid.
Didn't order any extra stems because I figured aftermarket. Titanium will be great for outdoor stuff and I have a Milliken walnut on order but those Ed's tnt stems look good.
Also did a fast and dirty anodize last night to dark purple and I like it but I'll probably take it to a light blue in the next week or so.
Didn't order any extra stems because I figured aftermarket. Titanium will be great for outdoor stuff and I have a Milliken walnut on order but those Ed's tnt stems look good.
Also did a fast and dirty anodize last night to dark purple and I like it but I'll probably take it to a light blue in the next week or so.
Md_Hybrid
Stuck under a đȘ”
noobvaperct
Well-Known Member
Since I will be using the TM2 myself without water 99.9% of the time, I'm all ears for recommendations on a nice cooling stem.My TM2 has landed!!
Like everyone else, I am majorly impressed.
Since so many of you reviewed the TM2 I figure I should mention 2 accessories that I purchased.
The long cooling stem with the blue beads is an improvement in my opinion. Cooler vapor. I wonder if it would be better with 5 beads per section rather than the 3. Cooling is noticeable. I wouldn't tell anyone who already has a 3-d cooling stem to get the new one, but it is an improvement.
I bought the dosing capsules. I believe that they are a major improvement. The first gen dosing caps had a lid that fit over the capsule. In order for the V.1 capsule lid to fit made the capsule body with the cannabis is looser in the stem.
The V. 2 capsule features a lid that fits without any overhang so airflow goes over the cannabis.
I expect that the tighter fit will combine with the Titanium stem to create a hybrid effect which I think I will like in the evenings.
I will report back on the combo of the new dosing capsules and the Titanium stem.
I'm not the biggest fan of how fast/gunked up the bottom of the CU gets where the dosing capsules go (I bought the v2 caps myself). I have used 2 caps total and other than those getting dirty easily and the CU getting dirty easily, I'm a big fan of the unit as a whole. It feels so solid, extremely well built.
Also slightly confused on the CU in general. It seems to be 2 empty dosing capsules and one is filled with 2 washers and 3 nuts, and is a cooling unit? What?
Yeah there is a weird perception on Reddit that the TM is fragile. I wouldn't kick it down a mountain, but it is as solid or better than my other battery vapes with glass parts.
Many great recommendations in the thread including pictures. The two most popular at the moment are from High Artisan and Good Vibes Boro.
sickmanfraud
Well-Known Member
Also his vapor pipe j-hooks are cheap and great!
I am another lucky fucker whose TM2 arrived today.
Felt quite excited for a new vape for the first time in a long time, so thought I'd go oldskool & take some gratuitus unboxing pics of which you've likely seen plenty but if you haven't & you're waiting for your TM2 to arrive & don't want to spoil a special moment, look away now. Otherwise, here we go - sorry if they seem a bit blurry but they actually came out pretty good considering the camera lense is completely shattered . . . . . .
And some destructions:
Parts are currently being cleaned before taking it for the first spin but initial impressions are strong - as mentioned by others, build quality looks to be to a very high standard, which makes me feel better about the premium price tag. Only dropped this much on a portable once before & unfortunately I feel it was a mistake. Hoping to have my faith redeemed with the TM but only time will tell.
Felt quite excited for a new vape for the first time in a long time, so thought I'd go oldskool & take some gratuitus unboxing pics of which you've likely seen plenty but if you haven't & you're waiting for your TM2 to arrive & don't want to spoil a special moment, look away now. Otherwise, here we go - sorry if they seem a bit blurry but they actually came out pretty good considering the camera lense is completely shattered . . . . . .
And some destructions:
Parts are currently being cleaned before taking it for the first spin but initial impressions are strong - as mentioned by others, build quality looks to be to a very high standard, which makes me feel better about the premium price tag. Only dropped this much on a portable once before & unfortunately I feel it was a mistake. Hoping to have my faith redeemed with the TM but only time will tell.
RustyOldNail
SEARCH for the treasure...
Any word on⊠RED?
If you mix yellow and magenta, youâll end up with red. The hues of each color affect what shade of red youâll end up with. If you add more magenta, youâll get a cooler red (like ruby)...whereas more yellow will give you a warmer red (like tomato)!
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
If you can confirm, if you picked up any dirt in this cleaning, someone else mentioned they did not, and it's supposed to be coming fully cleaned now... Would love (for myself and others) to not need clean to get started!
RustyOldNail
SEARCH for the treasure...
You run the risk of âbeliefââŠ. I would always be wondering if the one I received was NOT cleaned in the factory. For me, thatâs not worth saving a few minutes to clean it myself. Seen this many times with products from Dynavap, some wipe clean, some do not. I always subscribe to the motto: âIf you want a job done right, do it yourselfâ.
I don't like the cooling unit at all. Gets funked up too easy. Pain to clean. And it messes with draw resistance.
If I didn't buy the 3d stem day one, my view of the TM would be swaying negative. Fortunately there seems to be many 3rd party stems that cool by other means and avoid the negatives above. I'm waiting for a terp pill stem myself.
EarthworldTim
Well-Known Member
Mine appeared to be cleaned before hand so I just cleaned the stems to be safe. Disassembled the cooling unit and no residual grease or dirt.
Djsleepy
Well-Known Member
Confirming if true, but I believe so.
Vaporific
All who wander are not lost...
I may have an old color by numbers set somewhere, lol. Iâll refrain from additional RED posts. I think however thereâs still speculation on the wood species for the red version and it was confirmed itâs not stained (or a yellow and magenta mix
). I did ask TM as follow-up to my repair email and havenât heard back yet what it was. Maybe they wonât reply. We shall see. Keep the TM2 reviews coming - very positive so far! 
Jill NYC
Portable Hoarder
Reminds me of a classic Breakfast At Tiffanyâs scene: IYKYK
And in case you have never seen one, here it is (sterling silver telephone dialer)
