see if this o-ring it's in place
edit: (you put all together? heater screen mod/tube/oring/top ring)?
Last edited:
TinyMight / TM 2
- Thread starter kuzko
- Start date
edit: (you put all together? heater screen mod/tube/oring/top ring)?
Yeah, it's in place. I think the issue stems from the bowl being attached to the heater screen because of the mod, which then could cause the platform the heater screen lays on to shift a bit, and then creates a gap for the glass tube to move around. Either that or it's just a defect with the fitting on my unit. I could probably fix it for good by adding another o-ring or two.
androponic
vaped.
i would say just email the maker and he can cancel it from his end and you should be good. i have received a quick reply any time i have had to email him.
Terpenetime
Well-Known Member
If you want to cancel your order the correct way to go about it would be to contact the seller and ask them to process a refund via PayPal.
Abysmal Vapor
Supersniffer 2000 - robot fart detection device
Glad you gotten on the train buddy ! I am sure this will become one of your top favorites ! Gonna load mine up , so cheers !
dr_fokos
Well-Known Member
Yes i did email the maker. but i was expecting to have the option to cancel the payment via paypal and i was just curius about the process. thank you both for the answers.
VirginVape10X
Well-Known Member
I had to take my TM apart yesterday because it was attacked by tiny red looking ninja zombie ants! These things were small enough to fit through the hole at the bottom of my TM, and managed to get into the heating chamber. What’s crazier is that there was no source trail for these f$&kers and even after crushing them with my finger, they’d get back up after a minute and resume crawling around. WTF!!! for whatever reason, these ants only went after my TM and dynavap stash box. Must be something in the wood. They left my Purple Heart and wenge pieces alone.
In any case, I unscrewed the long screw that keeps everything together and cleared the ants out without having to fiddle with the heating chamber. I also cleaned the entire air pathway and reassembled everything. Then I proceeding with loading a freshly charged battery, but the the TM kept buzzing once when holding down the fire button, which per my limited understanding, indicates a low battery. But the battery was completely charged, as were two other batteries I inserted. Could the ants have messed up the contact or something? Or do I need to finesse the tightness of the screw. Just barely had this unit for 2 weeks and would hate to think that an army of puny red bandits turned it into a $200+ paper weight. What should I do???
In any case, I unscrewed the long screw that keeps everything together and cleared the ants out without having to fiddle with the heating chamber. I also cleaned the entire air pathway and reassembled everything. Then I proceeding with loading a freshly charged battery, but the the TM kept buzzing once when holding down the fire button, which per my limited understanding, indicates a low battery. But the battery was completely charged, as were two other batteries I inserted. Could the ants have messed up the contact or something? Or do I need to finesse the tightness of the screw. Just barely had this unit for 2 weeks and would hate to think that an army of puny red bandits turned it into a $200+ paper weight. What should I do???
oh fuck.
I don't know if it helps, but when I got my new TM it didn't work despite the battery being full. It turned out that the temperature was set below 4 and it probably didn't work because of that was was thinking. But now when I do the test, mine is also at 2 starting
After you turn it on?:thinker:
The red led is blinking?
jbm
Not a Vapman “beta tester”
Has anyone communicated with the maker recently? I put in an order for an extra CU and some stems 11 days ago, and I heard from him the day after the order. He said that the order would be going out the next day. That was 11 days ago and there has been no response to several emails sent since.
VirginVape10X
Well-Known Member
Yes, the red led blinks, but it no longer buzzes like it used to
scooterboy
Muppet, not moped.
androponic
vaped.
if he sent it like my last two accessory orders then there is no tracking on it. and it takes a long time to get here to the USA from there since its basically first class mail
scooterboy
Muppet, not moped.
Good to know - thanks!
jbm
Not a Vapman “beta tester”
Did your order status remain “pending” until it arrived? Also I haven’t been charged for the order yet.
androponic
vaped.
I'm trying to wrap my head around the cooling unit idea. Wont the CU become caked with reclaim?3 nuts, 2 washers, 1 screw, and 2 cylinders - top and bottom (with screen) - so simple and yet incredibly effective for cooling. Priceless! Love my Tinymight! My CU (and stem) will have a bath soon from all the love it’s getting...
It does a bit.
GerVn_Vap0rist
Well-Known Member
I think that is not really a problem u can throw the cu (without the o rings) in a jar of iso. I prefer the ultrasonic cleaner method so my stuff is clean in about 5-10 minutes. The cu is one of the things that shines out from the tm. I just use the short stem and get totally cool clouds
Last edited:
@frgmnt,
With the mod screen there's no bed for the stem, because the ring is upside-down.
The dommed screen(from the heater screen mod) isn't loose inside de stem? If so, press it down to increase the diameter.
I was under the impression the heater screen ring was right side up with the mod. I thought it was originally wider diameter side of the ring was on the bottom. The domed basket fits extremely snug. The part that moves is the metal base that touches the bottom of the glass tube and is the platform for the heater screen ring. Although everything is fit pretty snug, if I try to wiggle the stem with enough force, it will shift that metal base the heater screen and glass tube is sitting on a bit, causing the glass tube to have extra rattling room.