TinyMight / TM 2

Tweakz

Well-Known Member
If the TM is on battery level 2 (vibrates 2 times) I only get one session and it also has a little less power. I don't think it's bad because I have a lot of batteries to change. if the TM vibrates 1 time I don't use it anymore and change. Then just steamed again with a new battery and it came out a little steam, which confirms that it has a little less power when vibrating two times
you're right. I think this is done in order to extend the tm's battery life . and I even like it. and the decrease in power is so insignificant that I almost don't notice it on 2-buzz. I only have 5 pieces of vtc6.
 

RxPlorer

Well-Known Member
I really like this case and set and the tight fit every part has.. What capsules are you using and the loolkit tube - brush, shovel, pick, do you have links to those items? (+tube)

capsules are s&b dosing capsules for the mighty or crafty. The tubes are packaging from some 510 cartridges circa 2016 or so. Brush and pick were leftovers from random accessory bags, maybe from the firefly?

Here’s the shovel. It complements the TMs stem size pretty well

Mylover PAX1 Pax2&Pax3 Accessory... Amazon.com: Mylover PAX1 Pax2&Pax3 Accessory Loading Tool for Pax2&Pax3: Industrial & Scientific

Thanks for sharing! I ordered one and also the smaller size (fits IQ2 perfect, or just for spare stems etc, too tiny for TM itself) then received them today. Very nice quality cases for the price, compact size, good protection...



The clear plastic tube seems to be just one of those that holds cartridges sometimes from dispensaries... The capsules are s&b dosing caps (not sure how well these work, haven't tried, don't really want to myself) brush just seems to be one of those common free ones that come with Chinese vapes, the herb tool keychain I think could be from DaVinci, or maybe just a generic one from Amazon or ebay...

I’d love to see the IQ2 in that case, and next to the Tm for a size comparison! You nailed it on most of those guesses. The keychain tube is the S&B capsule caddy, it holds 4 loaded caps.
 

Attachments

  • Screenshot_20200521-084645.jpg
    Screenshot_20200521-084645.jpg
    271.8 KB · Views: 19
Last edited by a moderator:

LabPong

Well-Known Member
Here’s the shovel. It complements the TMs stem size pretty well

Mylover PAX1 Pax2&Pax3 Accessory... Amazon.com: Mylover PAX1 Pax2&Pax3 Accessory Loading Tool for Pax2&Pax3: Industrial & Scientific

That is a fake Pax tool.......not even close to the real thing.....smaller in diameter and length....worthless. Below are comparisons to the real one made by NewVape for Pax.

Fake-Pax-Real-Size.jpg


real-Fake-Pax-Tool.jpg


Notice the handle area.....that is how I could tell instantly the one from amazon was fake. (i add o-rings for grip)
 

Guest399

Well-Known Member
But I would be happy if there is an RBT Splinter Z owner who also has a TM too, to know if the Splinter Z is as good as the TM or if it can't keep up? does not want to write offtopic. would also be happy about a tip via PM

Edit: i am asking because maybe in the future i am be interest in the Splinter Z too ;)
 
Guest399,

Bazinga

Well-Known Member
I have both. I am NOT an experienced user. For me the Splinter gets the job done without any fuss. Cleaning is simple. Uses very little flower. No CU to mess with. Less expensive than the TM. Vapor does not get hot. The TM also gets the job done. It is expensive. The temperature control dial is, for my use, very small and hard to adjust to the desired level (number) if the room isn't well lit. The TM has great portability. The TM also produces cool vapor. Just my 2 cents.
 

Crohnie

Crohn's Warrior
Ordered Tiny Might on May 5th. Payment was returned to my checking account May 15th. Emailed 3 days ago and haven't heard anything. It this is an example of their customer service, I'm not sure I want to do business with this company. If there's a separate shipping thread, I apologize . please move post.
 
Last edited:
Crohnie,

Faolan

Mighty, Air1.5/Max/Go, Tinymight, Dynavap, Fury2
May 17th order here. No refund for me yet, hopefully only thing sent my way is a vape..
 
Wolf,

Tweakz

Well-Known Member
Ordered Tiny Might on May 5th. Payment was returned to my checking account May 15th. Emailed 3 days ago and haven't heard anything. It this is an example of their customer service, I'm not sure I want to do business with this company. If there's a separate shipping thread, I apologize . please move post.
did you buy through paypal?
 
Tweakz,

Siebter

Less soul, more mind
Emailed 3 days ago and haven't heard anything. It this is an example of their customer service, I'm not sure I want to do business with this company.

I do not know what's the story behind your case, but I'm sure your issue will be solved eventually. The TM customer service is actually quite awesome.
 

Glatch

Active Member
That is a fake Pax tool.......not even close to the real thing.....smaller in diameter and length....worthless. Below are comparisons to the real one made by NewVape for Pax.

Fake-Pax-Real-Size.jpg


real-Fake-Pax-Tool.jpg


Notice the handle area.....that is how I could tell instantly the one from amazon was fake. (i add o-rings for grip)
Only the first image on amazon shows the fake one.
For that price It might as well be the real deal.
 
Glatch,

Crohnie

Crohn's Warrior
of course this problem will be solved . write directly to the TM dude. and describe your problem. I think the funds were returned due to the paypal system
I hope you're right. I emailed him 3 days ago and haven't heard anything.
 
Crohnie,

Glatch

Active Member
capsules are s&b dosing capsules for the mighty or crafty. The tubes are packaging from some 510 cartridges circa 2016 or so. Brush and pick were leftovers from random accessory bags, maybe from the firefly?

Here’s the shovel. It complements the TMs stem size pretty well

Mylover PAX1 Pax2&Pax3 Accessory... Amazon.com: Mylover PAX1 Pax2&Pax3 Accessory Loading Tool for Pax2&Pax3: Industrial & Scientific



I’d love to see the IQ2 in that case, and next to the Tm for a size comparison! You nailed it on most of those guesses. The keychain tube is the S&B capsule caddy, it holds 4 loaded caps.
In the original post the dosing capsules are all in your stem.
From previous posts my understanding was the capsules don't fit all the way in the stem?
Did you do any modifications on them?
And how are they compares to no capsule?
 
Glatch,

Amature60

New Member
I want to get a Tinymight but I’ve been waiting on a replacement Apollo which was amazing but crapped out after 6 months. Its been 3 months I’m just keeping positive and hoping the Mail is just slow because of COV. Or maybe they are on vacation.
 
Ameture60,

frgmnt

Well-Known Member
Do you guys stir the bowl? I find I always have this green outer ring if I don't stir my bowl. Still playing around with bowl sizes. Currently have it set so it takes about one scoop from the Pax loading tool, lightly tamped down. I also have been using the dzoinp mod with the rimmed basket screen installed in the heater screen, but I'm wondering if I should reverse it to see if I can avoid stirring my bowls. I'm guessing there's no way to avoid it though due to the nature of convection and the much cooler glass walls.

I probably wouldn't mind stirring it if it wasn't so much effort to take out the bowl. After the initial glow of using it, I find myself going back to my E-Nano whenever I'm vaping at my desktop. Extremely easy to pop the heater off and on the bowl to stir
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I never bother stirring TM, no need, try using a different grind and/or loading style, even adjusting draw and trigger usage.

But I would be happy if there is an RBT Splinter Z owner who also has a TM too, to know if the Splinter Z is as good as the TM or if it can't keep up? does not want to write offtopic. would also be happy about a tip via PM

Edit: i am asking because maybe in the future i am be interest in the Splinter Z too ;)

Yeah the place for direct comparisons is actually over in AskNewFC here:
We used to have one comparing of the TM to Tetra, Grasshopper, Mighty, and SplinterZ, should probably consolidate the ones from old AskFC into one new post here...

bazinga gave you some good basic differences, they are both very effective but very different to be sure. So yes I think it can keep up, once you learn how to use it, and it can also be quite complimentary.

And now a PSA if anyone wants screens from MistVape, they have a new deeper cup available now, and a memorial day sale!
I'll use this thread for stems, screens and other stuff that is not a vape.

Starting with the deep cup screens which just landed. These are 316SS, 50 mesh, .42" diameter and .35" deepView attachment 516
In the store now. MistVape™ Online Store

Memorial Day sale 10% off site wide until May 28, use coupon code MemDay2020
 
Last edited:

hazeyp000

Active Member
I hope you're right. I emailed him 3 days ago and haven't heard anything.
I hit him up on insta and got a response over a question a few days ago. I think it is a hold on your paypal so its not a payment. So when order goes thru it will then be taken out. But check with them.
 
hazeyp000,

Siebter

Less soul, more mind
Do you guys stir the bowl?

Like @Shit Snacks I never bother to stir as to totally spoils the flow for me. But I also never feel the need to, even when I see some uneven spots or green specks after pulling out the stem; when blowing out the abv and inspecting it closely after some decrumbling, I always find it thoroughly spent. The most any extra stirring gave me was maybe a quarter of a wispy hit.
 
Top Bottom