If it is your own order, they can find you by your og order name/address henceforth no need to pay...
If it isn't yours and theres no order num...then yea...its summat like 80quid each.
TinyMight / TM 2
- Thread starter kuzko
- Start date
If it isn't yours and theres no order num...then yea...its summat like 80quid each.
GoldenBud
Well-Known Member
@ 9.5 TM 1 = FlowerPot . infinity amout of vapor..starting slow and it doesn't even close to combustion.. higher temp rocks!!
abv:
Last edited:
Dr. G
***Old Resident*** Vapman Collector
I have always wondered about that...how do they manufacture? Are they still hands on with every piece? Is it machine made now? I always wonder...after I saw that documentary about Storz and Bickel I always wonder what the other companies look like when the units are put together. I have always had such wonderful customer service from Tinymight. I always get a little note or acknowledgment...I love this company...my TM and TM 2 rock.
Mr Turnip
Well-Known Member
Yeah I purchased it locally so don't have any warranty or receipt with it.
I've had it a while never thought it's a counterfeit device. But obviously sending it in I'd get 100% clarification on that. And when I bought it I don't think any knock offs were available. I did send pictures over of the unit before I sent it in. Used it to death and it's seen better days now.
I think the added cost may be the exchange rate and having to add on extra accessories postage not sure exactly how it got to that price.
Hopefully I'll be happy when it comes back.
I've had it a while never thought it's a counterfeit device. But obviously sending it in I'd get 100% clarification on that. And when I bought it I don't think any knock offs were available. I did send pictures over of the unit before I sent it in. Used it to death and it's seen better days now.
I think the added cost may be the exchange rate and having to add on extra accessories postage not sure exactly how it got to that price.
Hopefully I'll be happy when it comes back.
I had do this mod in the past and used a small bit of aluminum foil.
Cheesequake
Free Men Don't Ask
There's very few products in general, if any, that I've been as completely satisfied with as I have with the TM2 since the very first hit. I accidentally knocked it off my table yesterday and just about had a heart attack. Picked it up, no rattles, heated up, charged, seems to be just fine. Still pumping out huge clouds as tasty as ever. Other than a single conduction vape of your choosing I can't imagine ever needing anything other than the TM2. And the only reason I even mention a conduction vape is I personally think I build a slightly different tolerance for convection and conduction. So even though the TM2 does its job perfectly and can fully extract as much or as little herb as I want, I still get a better buzz when swapping to a conduction vape after using it exclusively for a while, and vice versa. Always been this way for me imagine but I'm just now able to articulate it for some reason.
Anyway I still love the TM2 after I think the normal honeymoon phase would be long over with and I don't plan on looking for a new vape anytime soon haha.
Anyway I still love the TM2 after I think the normal honeymoon phase would be long over with and I don't plan on looking for a new vape anytime soon haha.
gangababa
Well-Known Member
I finally have my Tinymight vape in hand. A few days ago, my partner returned to Uruguay from her trip to the States, bringing the TM2 that I ordered shipped to her cousin’s home. Perhaps this is the first Tinymight in Uruguay. At the same time, she brought other various extra items I ordered (and of course all that she purchased in the USA).
I purchased the extended full package because ordering and getting things shipped to Uruguay later might be a hassle or impossible (some places are like that).
My first day with the TM2 was devoted to charging three Molicel P28 batteries, investigating and cleaning the TM and its accessories, like GRAV stems, many screens (flat, rimmed, and basket), quartz and ruby pearls. This all required reorganizing my vape cabinet.
The second day I played with stems, cooling units, pearls, and dosing capsules, trying to create a working collection of choices.
Having used the TM over three days now, I am impressed by the build quality and can only say, “It works.” As a long time Arizer Solo user, I expect to enjoy this glass stem heating device. Perhaps I will have more to say.
I purchased the extended full package because ordering and getting things shipped to Uruguay later might be a hassle or impossible (some places are like that).
My first day with the TM2 was devoted to charging three Molicel P28 batteries, investigating and cleaning the TM and its accessories, like GRAV stems, many screens (flat, rimmed, and basket), quartz and ruby pearls. This all required reorganizing my vape cabinet.
The second day I played with stems, cooling units, pearls, and dosing capsules, trying to create a working collection of choices.
Having used the TM over three days now, I am impressed by the build quality and can only say, “It works.” As a long time Arizer Solo user, I expect to enjoy this glass stem heating device. Perhaps I will have more to say.
2minTurkish
Well-Known Member
Yup, I've heard of this before to connect the battery strip to the top of the TM, but I was wondering about what non-metal material goes in between the steel ring and the battery strip. @iiNXS
kiddvudu2
Well-Known Member
Just did a personal comparison of my remaining arsenal and had a great time in the garage while doing it! haha. I suppose I'm still in the honeymoon phase with TM2, but I feel I've been around the block enough to know that this device is something special. It can morph into so many roles and is a top-notch performer at all of them. I prefer to maintain a minimal number of devices for stealth reasons, and TM2 just helped me in a big way to shrink my vape footprint in the house. It might sound crazy, but maybe a 4/20 backup TM2 would be a wise investment...
Top part you want conduction so hence the foil they used. But you don’t want that with that steel ring I would use something small and non toxic like wood ,glass, ceramic, nonwax cardboard . Been using it daily and it’s finally living up to the hype without having to go past 6-7 temp anymore and even brown AVB.
dman28
Vaping for the health of it.
I am of the same ilk don't need any more than the vapes that I use regularly. Had a new TM that was purchased as a back up and sold as it was never used.Just did a personal comparison of my remaining arsenal and had a great time in the garage while doing it! haha. I suppose I'm still in the honeymoon phase with TM2, but I feel I've been around the block enough to know that this device is something special. It can morph into so many roles and is a top-notch performer at all of them. I prefer to maintain a minimal number of devices for stealth reasons, and TM2 just helped me in a big way to shrink my vape footprint in the house. It might sound crazy, but maybe a 4/20 backup TM2 would be a wise investment...
SquirrelMaster
Well-Known Member
It sounds like you already have your back up and a purpleheart TM2 will be your future deviceJust did a personal comparison of my remaining arsenal and had a great time in the garage while doing it! haha. I suppose I'm still in the honeymoon phase with TM2, but I feel I've been around the block enough to know that this device is something special. It can morph into so many roles and is a top-notch performer at all of them. I prefer to maintain a minimal number of devices for stealth reasons, and TM2 just helped me in a big way to shrink my vape footprint in the house. It might sound crazy, but maybe a 4/20 backup TM2 would be a wise investment...
. For anyone wondering about the purpleheart TM2 it is still unreleased but, Tinymight did have a list started. Email info@tinymightvape.com (if they still have it going).
The TM2 was my way of renewing my vows
.
badbee
Well-Known Member
If you are looking for a material you might want to try parchment paper. It is silicon impregnated paper intended for baking, very temperature stable and safe, non conductive.
vapviking
Old & In the Way
Not always silicone in parchment paper.
This from Wikipedia:
Vegetable parchment paper is made by running sheets of paper pulp through a bath of sulfuric acid[1] (a method similar to the way tracing paper is made) or sometimes zinc chloride. This process partially dissolves or gelatinizes the paper. This treatment forms a sulfurized cross-linked material, with high density, stability, heat resistance, grease resistance, water resistance, no loose fibers as well as low surface energy — thereby imparting good non-stick or release properties.
And this:
Other bakery release papers
The non-stick properties can be also achieved by employing a coated paper, for which a suitable release agent—a coating with a low surface energy and capability to withstand the temperatures involved in the baking or roasting process—is deposited onto the paper's surface; silicone (cured with a suitable catalyst) is frequently used.
Parchment paper - Wikipedia
kiddvudu2
Well-Known Member
'mornin all. Ahhh, a cup of earl grey ginger and level 3 TM2. Excellent way to get the day started. The sun is just starting to chase away the purple morning light and mist. Feels right for a brisk jog around this town I love. Make it a great one ya'll, peese!
Pitter patter, let's get at 'er!
Pitter patter, let's get at 'er!
androponic
vaped.
If anyone else registered their TM warranty in your account dashboard to stay valid as instructed recently and its still stating “pending” i emailed them and here is the response i just got and all is well.
“Dont worry about it ! It is all good ! It will be with that status for a while ,until someone is assigned to review them. It is new process so please bare with us a little longer and rest assured you will be taken care of if needed !”
“Dont worry about it ! It is all good ! It will be with that status for a while ,until someone is assigned to review them. It is new process so please bare with us a little longer and rest assured you will be taken care of if needed !”
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Same brother! Procrastination nation
BabyFacedFinster
Anything worth doing, is worth overdoing.
I'm having a hell of time trying to convert and upload a copy of my vgoodiez receipt that they will accept on the warranty page. Maybe I can email them a copy? The warranty page won't send w/o an uploaded receipt. This is becoming a pain in the ass. I need to go use my Tinymight, just to deal with this damn warranty. 
Last edited:
jbm
Well-Known Member
I was able to print my vgoodiez order receipt to PDF and upload that to the TM site. Microsoft does apparently make a PDF printer driver for Windows; see this pageI'm having a hell of time trying to convert and upload a copy of my vgoodiez receipt that they will accept on the warranty page. Maybe I can email them a copy? The warranty page won't send w/o an uploaded receipt. This is becoming a pain in the ass. I need to go use my Tinymight, just to deal with this damn warranty.
BabyFacedFinster
Anything worth doing, is worth overdoing.
840_divided_by_two
Well-Known Member
Just got my TM2 and it's a beast. That is all. Time for an eds TNT stem I guess lol
sickmanfraud
Well-Known Member
Ed's stems are great! for other cooling stem, options check out TheRogueWax Works.com and Goodvibesboro.com