Necroticism
Well-Known Member
Thank you!
TinyMight / TM 2
- Thread starter kuzko
- Start date
My TM is 20 months old or so & i'm having same issue with getting a "low batt" vibration then sometimes a shut down immediately , sometimes it goes to session mode with light on continuously for a very short time before it shuts down. Then when turn it on again, its 3 vibrations & works sometimes for a hit or 2, but then next press of button shuts down again. (when it does this i'll ck battery charge & its always at least 3.7V, sometimes at 3.8 -so it should be operating fine at this level). I've cked on which batteries do this & take them out of rotation but TM still does this with my Molicel 26A & Sony VTC6. They're relatively new batteries in last 6 months & i use a decent D4 charger
I contacted TM via email about this as it makes it hard to use when battery goes to 3.8V or so. TM responded that he's sure why its doing this & that he's not seen this but he did send me a return label if i wanted to send it in for repair, he'd check it out. He also offered to send me a new unit if i wanted to pay the $79 repair cost- which i thought was fair also.
feralcomprehension
Qualified Observer
Have a go at cleaning all your contacts before spending any money
Pretty straightforward, a common recommendation is to burnish them with a pencil eraser.
Abysmal Vapor
Supersniffer 2000 - robot fart detection device
Here are some photos from the LCV site
Vaporific
All who wander are not lost...
Light ISO swabs may help too. I use Blu-Tac too to clean contacts and particularly threads where a pencil eraser may not reach.Have a go at cleaning all your contacts before spending any money
Pretty straightforward, a common recommendation is to burnish them with a pencil eraser.
TM 2? I’m counting the days until I can order one, a RED one too
. Love the light through the new stir tool. This will be new for me seeing a color other than red which my first gen TM only emits. 
I am contemplating getting a red one too...and when I say contemplating I mean I am going toLight ISO swabs may help too. I use Blu-Tac too to clean contacts and particularly threads where a pencil eraser may not reach.
TM 2? I’m counting the days until I can order one, a RED one too
Does anyone know will the TM2 come with a Ti stem?
condition
Well-Known Member
Thank you for the ISO swabs, will do it soon. Isn't too much to use ISO and Pencil Eraser and Blu-Tac?
Abele Rizieri Ferrari
Well-Known Member
Nkon.nl
Sidvicius
....
I confirm I have been buying them for years, they sell them without custody but you have to buy them separately too
Djsleepy
Well-Known Member
The colors on the battery indicator are green (fully charged) then blue then purple then red (need to charge)Here are some photos from the LCV site
Vaporific
All who wander are not lost...
No it won’t - unless Ville plans to partner with one of the Ti stem makers (a few contribute to this thread).
Light ISO won’t hurt, just let it dry. A pencil eraser and Blu-Tac are non-invasive though I’d be careful with an eraser and any shavings coming off from it; Blu-Tac doesn’t shave off though very thin portions of it could lodge in threads but that’s never happened to me with any of my vapes that I’ve used Blu-Tac with. The TM’s battery door threads are fairly wide too so less concerning IMO.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Huh? It was already said that TM is going to be offering its own titanium stem soon too as pictured with one of the TM2 units in the wild... It is different from the aftermarket titanium stems made by three different members here so why would he need to partner with them?... We just don't know if there will be a bundle kit with it and when
If it would come with the unit it would be a little easier to fork out the price difference.
Dr. G
***Old Resident*** Vapman Collector
Thank you for these photos...it looks amazing. The only thing I wanted was a stir stick. Viola! There tis!Here are some photos from the LCV site
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Not really, could make it even more expensive, could only be available as a separate accessory, we're not even 100% sure on the final price from TM necessarily... Anyway the price increase makes sense to me with these improvements, it's all relative, especially as most avid vapors already have one now, the market is shrinking so might need to make more per device, the cost to manufacture them could have gone up too
Either way I know I will fork it out.
Abele Rizieri Ferrari
Well-Known Member
Yea will be interesting to see price(s) perhaps varying per wood type? Will TM1 be retired completely?
Added titanium stem would be turn off for me as well. i think ideally in this age of waste these kits come as bare as possible with option to add.
Added titanium stem would be turn off for me as well. i think ideally in this age of waste these kits come as bare as possible with option to add.
Djsleepy
Well-Known Member
No OG TM and TM2 will both be offered.
Maybe different wood for OG TM?
cliffhanger1
Well-Known Member
From which material is the metal tube inside the TM2 ?
Is it in Aluminium like the very first versions or is it in stainless steel ?
Sorry i had long no TM but heard there are SS in the market..
Is it in Aluminium like the very first versions or is it in stainless steel ?
Sorry i had long no TM but heard there are SS in the market..
Abysmal Vapor
Supersniffer 2000 - robot fart detection device
@cliffhanger1 I just shot Lainaus a message about it ,and also if OG TM is going to be offered in new woods . In meantime here is Jimi hitting on the OG !
Also i asked if the new battery lids will fit the OG TM and answer was ,no ,due to diff specs.
. In meantime here is Jimi hitting on the OG !Also i asked if the new battery lids will fit the OG TM and answer was ,no ,due to diff specs.