TinyMight / TM 2

Vapor-catzG

Vapor-catzG

G
Hi guys ,how’s everyone, anyone really but spoke to shut snaks before just a daft one ,how do i get my ownership menu up ,?,been adding to it I think ,
mighteven be just I don’t see ,
anyway thanks in advance,,,
also was going to get a spare aswell, do most have ,ive 2 of all the ones I don’t use lol ,all new ,having a clear out soon I think ,but would love a different wood also feels so robust ,did think once I’d need to send it in but read a few posts , shit snacks and other posts ,guys thanks and back running ,
never found out how to recalibrate though? ,
one day if I need to but just centre the pin I found,
G
 
Vapor-catzG,
2

2minTurkish

Well-Known Member
jasp3r said:
Not following being reminded of the Z lol but sweet setup!!
I would think those rubies are overkill tho, do you notice a different with and without them?
Click to expand...

I had the rubies in there before I got the female vigreaux stem, so I'm really not sure, but I can't imagine they do much relative to adding the female vigreaux stem.


Shit Snacks said:
He means because the Splinter Z is very tall on top of a mod with a long glass stem ;)
Click to expand...
That is exactly why lol.

cybrguy said:
In actuality I find the performance of the TM to be very similar to the Splinter Z. The biggest advantage is that the TM is self contained and there is no need for a mod, so it is a good deal shorter than the Z. They both are big hitters and very controllable.
Click to expand...
Exactly this too. I find the performance to be very similar but a bit better on the TM. The smaller form factory is definitely a huge upgrade, along with not having to fiddle with TCR values, PID values, etc.
 
jasp3r

jasp3r

Well-Known Member
cybrguy said:
In actuality I find the performance of the TM to be very similar to the Splinter Z. The biggest advantage is that the TM is self contained and there is no need for a mod, so it is a good deal shorter than the Z. They both are big hitters and very controllable.
Click to expand...
Totally agree. It would sense in theory since they are both high-end convection, glass lined, regulated, high surface area heaters. Makes sense these are the most similar.

Currently I'm at the point of my VAS where I am in a Splinter Z rabbit hole but it hasn't dethroned my TM yet.
 
jasp3r

jasp3r

Well-Known Member
cybrguy said:
I guess that is why I have 2 TMs and 3 Zs. They are really the only non butane vapes I use. But they don't stop me from using my VCs and my Lotus. Sometime I am in a butane vape mood, sometimes not. The battery vapes are much more mindless, in a good way.
Click to expand...
If only I could acquire a Lotus, just not a huge fan of inhaling the devil's gas :D. I'm looking at getting a second Tinymight since if it broke I don't know what I would do. That being said I have 3 Splinter Z type vapes now and a custom coming from Mark.

Also, I would say have a 510 mod base like FearandLawyering is producing makes a huge difference. Now if a maker were to create a wood base for a mod that would game changing. Reduce the profile and add some more flare? Sign me up.
 
jasp3r,
cybrguy

cybrguy

Putin is a War Criminal
jasp3r said:
If only I could acquire a Lotus, just not a huge fan of inhaling the devil's gas
Click to expand...
In truth the air inputs for the Lotus are on the bottom of the cap and the heat plate is on the top, so there is no butane exposure, but the hard part today would be getting your hands on one. Most people who have one likely want to keep it in their stable.

The good news is there are lots of very good vapes that ARE available, like the TM. I still consider it my favorite.
 
jasp3r

jasp3r

Well-Known Member
cybrguy said:
In truth the air inputs for the Lotus are on the bottom of the cap and the heat plate is on the top, so there is no butane exposure, but the hard part today would be getting your hands on one. Most people who have one likely want to keep it in their stable.

The good news is there are lots of very good vapes that ARE available, like the TM. I still consider it my favorite.
Click to expand...
Oh yeah I know the Lotus + Vapcaps aren't inhaling any butane. Wish I could my hands on a Lotus and there is actually one floating on EE but with no extra heat plates :(
 
P

Plutonic

Well-Known Member
Just got a TM last week and love it! Mostly I've been using the 3D cooling stem, but yesterday I discovered a MacGyverish alternative.

I also have an e-nano that I use with a "screen GonG"/adapter attached to a j-hook. The adapter is too skinny to fit snugly into the TM, but I've folded the silicone stem guard down onto itself, so now the adapter fits into the TM almost all the way to the mesh screen. It wiggles a bit inside the TM, but it's easy to hold the TM airtight against the stem guard, which gives me excellent hits! I had to turn up the temp a little, but now I don't have to twist anything in or out of the TM.

Anyway, thought another e-nano user might want to noodle around.
 
waxdab23

waxdab23

Well-Known Member
About to buy this unit. Sorry for the newb question - but are there any accessories/add-ons that are must haves that I should get? I'm all set for desktop purposes and would be using this only as a portable vape on-the-go, no water, no need to connect to anything else. Will replace my Mighty that I'm just kinda tired of.
 
waxdab23,
Z

Zipford

Well-Known Member
waxdab23 said:
About to buy this unit. Sorry for the newb question - but are there any accessories/add-ons that are must haves that I should get? I'm all set for desktop purposes and would be using this only as a portable vape on-the-go, no water, no need to connect to anything else. Will replace my Mighty that I'm just kinda tired of.
Click to expand...
I'd get the o-ring kit but wouldn't consider anything else must have. If you hate cleaning, maybe another cooling unit and stem?
 
2

2minTurkish

Well-Known Member
waxdab23 said:
About to buy this unit. Sorry for the newb question - but are there any accessories/add-ons that are must haves that I should get? I'm all set for desktop purposes and would be using this only as a portable vape on-the-go, no water, no need to connect to anything else. Will replace my Mighty that I'm just kinda tired of.
Click to expand...

I would also get a bunch of extra rimmed and rimless basket screens. That'll be a huge help when you inevitably get GAS after and look for some alternative cooling solutions.
 
T

TeaCup

Well-Known Member
Is there anyone that has both the VapeXhale EZ load baskets that @SixStringToker uses for one of his mods, and a dosing capsule from Tinymight?

Curious if either can "grip" the side of the glass, or if they just more or less slide in and out. If you have one, but not the other, could you please tell me if there's any grip to the one you have. Or if you think that either can be smooshed down a little to make them just a little fatter (doubtful, there usually to rigid to move much). Thanks alot.
 
TeaCup,
Seantagon

Seantagon

Well-Known Member
TeaCup said:
Is there anyone that has both the VapeXhale EZ load baskets that @SixStringToker uses for one of his mods, and a dosing capsule from Tinymight?

Curious if either can "grip" the side of the glass, or if they just more or less slide in and out. If you have one, but not the other, could you please tell me if there's any grip to the one you have. Or if you think that either can be smooshed down a little to make them just a little fatter (doubtful, there usually to rigid to move much). Thanks alot.
Click to expand...
i have the evo and tried this allready it’s too skinny for the TM and falls out of the stem. I suppose it could still work since your going to be loading it upside down anyway, but I haven’t tried it past trying to fit it in the stem.
I wouldnt recommend trying anything not proven to work as you may cause damage to the heater screen or worse.
 
condition

condition

Well-Known Member
Hi guys, in the wood of my TM small holes appear, eventhough I bought the bees wax from manufacturer and applied it thoroughly. Do you think it will deteriorate?
20211025-231847.jpg
 
condition,
  • Haha
Reactions: dzoinp
SixStringToker

SixStringToker

Naked member
Seantagon said:
i have the evo and tried this allready it’s too skinny for the TM and falls out of the stem. I suppose it could still work since your going to be loading it upside down anyway, but I haven’t tried it past trying to fit it in the stem.
I wouldnt recommend trying anything not proven to work as you may cause damage to the heater screen or worse.
Click to expand...
Interesting. This means either the evo baskets or the TM stems may have changed recently. I lop the rim off the evo baskets and can slide the rimless basket to any position in the stem and it'll stay. I have received a couple of new stems from TM recently, I'll try to remember to check them this evening.

50829971988_3b43ff07bc_o_d.jpg
 
karec

karec

Well-Known Member
SixStringToker said:
Interesting. This means either the evo baskets or the TM stems may have changed recently. I lop the rim off the evo baskets and can slide the rimless basket to any position in the stem and it'll stay. I have received a couple of new stems from TM recently, I'll try to remember to check them this evening.

50829971988_3b43ff07bc_o_d.jpg
Click to expand...
Already noted similar differences from the TM stems inner diameter, one point not even the gaskets would stop the CU from moving... had to use the Crafty smaller ones and worked but yeah i guess from batch to batch they have differences, i didnt spot any difference with the EVO baskets so far
What temp you use? your AVB look a bit dark imo, should try @dzoinp mod, the load will be further away from the heating element and that prevent those darker spots. I Really like that mouthpiece.
Cheers
:cool:
 
You must log in or register to reply here.
Top Bottom