TinyMight / TM 2
- Thread starter kuzko
- Start date
RustyOldNail
SEARCH for the treasure...
The TM Extra long cooling stem, was included as a freebie in my last order. Works surprisingly well with one of the TM capsules.
JoeKickass
Well-Known Member
Even if you found one, there is a glass sleeve inside the TM that will break first. I found that out the hard way, check my posts for pics, but the glass stem is not the weak point.
Basically, you might break the inner glass sleeve eventually just due to normal use, no need to worry about the thick glass stem. Just stock up on those inner sleeves and save this vape for special occasions to get the most life you can out of it.
I'm not sure about the proper protocol to continue a previous post. I finally received a reply from TinyMight today, 10/18. It included what I believe to be a prepaid label for DHL (when I priced shipping to Finland it was well over $100 one way). So I plan on sending it on its way tomorrow.
RustyOldNail
SEARCH for the treasure...
Hmmm... Since the TM dude isn’t making his own capsules, and they are NOT identical to the similar Mistvape ones, the mystery is where can we buy the TM version at a more reasonable price?
I have a different design for a cooling stem, it could be adapted to any vape, but this one would be a prime candidate. 
Kind of busy with other glass projects right now, but I might have to get to work on that one for all you fine folks!!
Kind of busy with other glass projects right now, but I might have to get to work on that one for all you fine folks!!
I already want one.I have a different design for a cooling stem, it could be adapted to any vape, but this one would be a prime candidate.
Kind of busy with other glass projects right now, but I might have to get to work on that one for all you fine folks!!
Cheebsy
Microbe minion
Yes please mate @invertedisdead
When my first TM was dropped, the stem shattered and the glass sleeve around the heater cracked. Hilariously that glass sleeve your refering to, was pristine. Every drop will be different, minimizing the number of components that can be potentially compromised can and will only help drop or knock survivability.
arb
Semi shaved ape
Hey now.............lolz.I have a different design for a cooling stem, it could be adapted to any vape, but this one would be a prime candidate.
Kind of busy with other glass projects right now, but I might have to get to work on that one for all you fine folks!!
At this point you don’t have a choice. I’m cyber bullying you into it.I have a different design for a cooling stem, it could be adapted to any vape, but this one would be a prime candidate.
Kind of busy with other glass projects right now, but I might have to get to work on that one for all you fine folks!!
I’ve been debating getting that, idk just seems a bit hard to handle/like I would break it in two seconds haha. Very tempting.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Well @Summer 508phineas' RBT stem actually does juuuust fit, however yeah I think the 19 mm ground glass joint is not a very nice mouthpiece... Also the problem with this is that there is no way to put a basket screen in securely from the other end, and be able to remove it?? Meanwhile rimmed basket screens get stuck in the tinymight so they aren't good either...
Also since this cooling stem (which I shared more details about in the Splinter and Milaana threads) uses a vigreux cooling spike pattern, using it upside down in the TM actually has the spikes facing the wrong direction, they should be facing toward the heat source, so not ideal unfortunately...
Cross posting from splinter thread:
And I just got one of these^ in Lake Green thanks to @seki who got regular green and the more clear blue above. Probably the nicest cooling stem I've ever seen honestly, thanks again to @Vlad the Inhaler aka 508phineas on Instagram (hit him up over there to place orders!) Colored stems are 19/22 and the clear ones are 19/19 (Mi3)
Last edited:
Summer
Long Island, NY
Well, since it fits, then phineas can make the same stem (dimensions) without the joint & then you can orient the stem right-side up with the cooling spikes on top & have the unobstructed part on the bottom for insertion of unrimmed basket screens.
Order one SS & let us know. 
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Well, since it fits, then phineas can make the same stem (dimensions) without the joint & then you can orient the stem right-side up with the cooling spikes on top & have the unobstructed part on the bottom for insertion of unrimmed basket screens.
Haha no not necessarily, the reason these RBT stems are easier to make and readily available is that he already had the tubes with the taper, but I mentioned it to him so he is going to see about stocking that size of tube for tinymight stem purposes...
But yes when he gets that size tubing I think he can make these, with the spikes going in the proper direction towards the load, but with a gap between them and that end so it can fit securely in the TM...
HOWEVER I don't know how you resolve the screen issue... if you get a basket screen in there how can you possibly get it out?? And if it's flimsy enough to be spun around or poked out by a pic then it's not a good enough screen imo (I hate ddave screens for example) so the only alternative I can think of is finding a screen that fits in well and then never being able to remove it... I have some other stems where that is my solution but it's far from ideal to not be able to fully clean them ever...
I am working with him to make an awesome heady jayhook, 19 mm female, he only had one joint though and it broke during the process, so he'll have to try again in November... So yeah maybe then we'll try a TM stem too? Custom work is not exactly cheap though, I am shelling out for the j hook because it's going to be nuts and will see a lot of use with a lot of different vapes, while I already spent a bit on a custom FW7 14 mm wpa dry stem...
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Yeah I know the RBT screens are not flimsy, that's what I like about them! (Did I imply otherwise?) But if you start poking through it with something sharp like that (a steel toothpick?) then it gets destroyed... Also to get it to fit snugly in the stem, there's no way a tweezer can grab the edges, they are flush with the glass wall... I'm telling you, it's impossible! lol if screen is easily removable then it's not durable and secure, but if it's durable and secure then it's not removable... Only way is to poke it out from the opposite end, but the problem with cooling spikes and bent stems is they make that impossible...
Last edited:
Summer
Long Island, NY
And you can always go with a wood stem of varying length: Recall this post?
The stem maker is Aezhenn.
Post in thread 'TinyMight Vaporizer' https://fuckcombustion.com/threads/tinymight-vaporizer.44563/post-1491930
The stem maker is Aezhenn.
Post in thread 'TinyMight Vaporizer' https://fuckcombustion.com/threads/tinymight-vaporizer.44563/post-1491930
Last edited:
LabPong
Well-Known Member
I have been making my own screens for the TM since January....no problems at all in the RBT short stems!
How come others have not figured it out/actually done it............ Do I have to post pics again? Dont make me.....! lol
Oh....also that pinched blue stem deal .....does the stem actually get 100% seal around the big o-ring? Spike holes are not good around the o-ring area....so if you can get one that has round glass at the o-ring...it works!
OH....no no no....I do not want my precious pure vapor to get distorted and dirtied because it touched wood! Glass is best... SS is ok.
How come others have not figured it out/actually done it............ Do I have to post pics again? Dont make me.....! lol
Oh....also that pinched blue stem deal .....does the stem actually get 100% seal around the big o-ring? Spike holes are not good around the o-ring area....so if you can get one that has round glass at the o-ring...it works!
OH....no no no....I do not want my precious pure vapor to get distorted and dirtied because it touched wood! Glass is best... SS is ok.
WisePenny
unknown. unmember.
My 2nd TM arrived this weekend, and I have to say that it is possibly nicer than my first in a couple ways.
Everything feels Tighter on it - the temp. control, the battery lid, and most noticeably, the tube holder is much tighter on my new unit than on the old. I ordered the extra long stem with this order, and it fits snug on my new unit, but I, so far, haven't been able to get my old unit's tube holder tight enough for the extra long stem, though it holds the regular glass stems fine. It wasn't until I received my 2nd for comparison that I see my original's tube holder's tightening ability is somewhat lacking. I have yet to test more than that, as I've been busy with the 2nd unit.
My 2nd unit runs much hotter than the first, it seems. 4 is comparable to 6 on my old, and I've been finishing at 6 instead of 7.5-8, with the same results. As well, I'd say the new unit finishes quicker.
I have no complaints about the body on my first TM, the wood has nice grain and isn't rough. But again, the new TM's wood is just-noticably nicer. As well, The heater screen seems to be better quality.
In my order comments, I asked for a long stem instead of a short for my stock set up - they sent the unit with the stock short stem set-up, but included 2 long stems free of charge.
I ordered one dosing basket - they sent 2.
I ordered 2 domed screens - they send 5.
. . .and here I was, vaguely anxious before receiving my order
All I can say is that for the 2nd time, TM exceeded my expectations.
I accidentally re-assembled my first TM correctly, as it has been working (mostly) like a champ. I had pushed my screen through to the coil, and I had to "take it apart to fix it". Those are usually the words I use before I fuck something up beyond repair. Of course, now that I've received my second TM, I'm in Finlander heaven. I, too, received "freebies". I was worried at first: what if I accidentally received someone else's order? Hearing of others getting great gifts helps alleviate my guilty feelings. 2020 isn't all bad after all.
Last edited:
Also I forgot to mention, I saw it posted in here a little while back, but somebody had said they ditched the basket screens infront of the CU for a couple of reasons, primarily because the resin was collecting ON the CU rather than mostly inside of it... which I think is a pretty fair analysis. I was going basket-screen less for a while, decided to switch to basket screen and see how I liked it, it was ok.... I didn't notice much improvement or even change other than the already noted increase in gunk infront of and on the CU. The AVB blows out in nice little pucks using the screen but theres no functional benefit to that, that I'm aware of anyway.
I also ditched the additional basket screen infront of the CU and went back to just CU in the stem. Much better. Although I thought I was cute and could get away with straw loading the WPA when I got it the other day, THAT requires a basket screen unless you want a mouthful of flower. But yeah for standard CU operation, I seem to prefer no additional basket screen. Any other stems, the WPA, the grav 3" taster, I feel like the basket screen is needed.
I also ditched the additional basket screen infront of the CU and went back to just CU in the stem. Much better. Although I thought I was cute and could get away with straw loading the WPA when I got it the other day, THAT requires a basket screen unless you want a mouthful of flower. But yeah for standard CU operation, I seem to prefer no additional basket screen. Any other stems, the WPA, the grav 3" taster, I feel like the basket screen is needed.
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
You misunderstood, I have plenty of basket screens, the issue is getting them out of the stem, if the other end of the stem is full of spikes (or bent) you can't push them...
And yes it does seal in the o-ring, that was the point of my post... The spikes end up literally right above the o-ring, but as I've said there are several reasons to wait until a proper TM stem is developed regardless...
M3 Element
Well-Known Member
Thinking about biting the bullet and finally purchasing a Tiny Might. Realistically do I need anything more than the TM, additional glass stems (1x short & 1x long), and the 18mm WPA?