Yeah it blows my mind that people are treating this thing like a DV. It has zirc balls for heat retention, and a VI. The ability to chain multiple bowls with high efficiency is one of its strengths.
The Tempest by Mad Heaters & Phatpiggie
- Thread starter oddjobold
- Start date
ibnganja
Well-Known Member
I got mine and I'm ecstatic.
Observation:
- using with the wand is incredible. So fast. So smooth. So intense MTL hits.
- only issue is it's perfect on the FIRST hit. I still haven't figured out subsequent bowls. Will experiment further.
Question:
- dumb Q but how do I change the sleeve? I wanna try the wood one but wasn't able to get the metal sleeve off. Tips for removal?
Observation:
- using with the wand is incredible. So fast. So smooth. So intense MTL hits.
- only issue is it's perfect on the FIRST hit. I still haven't figured out subsequent bowls. Will experiment further.
Question:
- dumb Q but how do I change the sleeve? I wanna try the wood one but wasn't able to get the metal sleeve off. Tips for removal?
666Honeybadger
Unknown member
LoL
Just quoted you to say that my cat is called "Muzieksken"....
Hahaha, that's almost exactly how i read your forumname! And i thought her name was very unique...
Meet Muzieksken, your namesake:
Also: i do agree with your statement that there's no need to cool it down but i have to add that i never had to reheat a bowl with weed: it's always done in one heating cycle.
Still: i usually quickly refill the bowl and use the remaining heat in the head to take a terpy low temp flavor hit on the new bowl, to get a small pre-taste of the bowl to come!
However when i use hash i sometimes do need a reheat, depending on how full the bowl is.
General Disaster
Of cabbages and Kings.
Just gently pull the mouth piece holding the air flow adjustment collar so you remove the whole helix, then push gently into the mouth piece end of wooden sleeve. The do the same with the bowl at the other end, and pop that one the bowl end of wooden stem.
If you find it hard to remove the parts, try having a hit, and then dismantle before it fully cools down - this makes the reclaim less viscose and softens the o-rings a bit. Pull gently to avoid ripping the o-rings or you'll need news ones for the wooden stem.
BagaDiLhuga
Member
Guys I combusted a few times, and the following bowls kinda had the same flavour has the combustion ones, do i have to clean the device to get rid of that smell, or am i tripping with the smell and tomorrow it will be gone? Haven't even done 10 bowls, i dont want to deep clean it again
General Disaster
Of cabbages and Kings.
The smell will likely fade with time and use (especially with use as the heat evaporates some of the aromatic compounds formed by the combustion). But generally, it's stinky and horrible and you want to clean it out. A quick go with some iso on the helix/mouthpiece and the inside of the sleeve should get rid of most if you're feeling lazy or rushed. Q-tip soaked in iso works well for a fast rub down (fnaar fnaar).Guys I combusted a few times, and the following bowls kinda had the same flavour has the combustion ones, do i have to clean the device to get rid of that smell, or am i tripping with the smell and tomorrow it will be gone? Haven't even done 10 bowls, i dont want to deep clean it again
Think of it this way, the PITA that cleaning it creates, will help educate your anti-combustion processes.
The more of a pain, the less likely you'll do it again!
I always clean after combustion bc it always leaves a stinky burned residue. Personally I find that soap and water is better for smoke odor than iso. Ymmv!Guys I combusted a few times, and the following bowls kinda had the same flavour has the combustion ones, do i have to clean the device to get rid of that smell, or am i tripping with the smell and tomorrow it will be gone? Haven't even done 10 bowls, i dont want to deep clean it again
BagaDiLhuga
Member
How do you do it with the soap? Is the water warm? Do you scrub or just let it stay there, and for how long? Thanks in advance for the tips
General Disaster
Of cabbages and Kings.
I mentioned iso for a fast rough clean up. I don't use soap & water myself but then I have less olfactory sense than a common house brick, so don't tend to notice any lingering taste or smell.
Some general rules though:
Advantages of iso are it's a very effective solvent that'll dissolve a wide range of compounds quite well.
It dries much quicker than water.
It's pretty much non toxic, or as non toxic as ethanol (I'm assuming you're not going to guzzle a litre or so while you're cleaning yer vape), even if you ended up inhaling a little bit of vapour from it, it's not likely to do you much harm.
But avoid using on the wood sleeve - just a q-tip in iso used to clean the internal stainless steel bore.
Some general rules though:
- Hot works better than cold (better solubility).
- A little detergent makes a big difference.
- A mix of iso and soapy water even better (but if it's warm the iso will evaporate quickly and stink the place out a bit (watch for naked flames too)).
- The heater should be ok, no need to clean, as it shouldn't have had any smoke going through it.
- Sugar soap or industrial detergents are even better but rather aggressive on flesh (rubber gloves and safety specs time).
Advantages of iso are it's a very effective solvent that'll dissolve a wide range of compounds quite well.
It dries much quicker than water.
It's pretty much non toxic, or as non toxic as ethanol (I'm assuming you're not going to guzzle a litre or so while you're cleaning yer vape), even if you ended up inhaling a little bit of vapour from it, it's not likely to do you much harm.
But avoid using on the wood sleeve - just a q-tip in iso used to clean the internal stainless steel bore.
kokolokokolokon
Well-Known Member
Hello everyone! I did a short video review on youtube. It is in Spanish, but maybe, with automatic subtitles or just with the images, it can help some people who don’t know how to disassemble the tempest or prefer a visual example instead reading the manual
.d
Wubba Lubba dub-dub
watched it two times while waiting for my tempest. great video overall, watched with english subtitles. thanks
kokolokokolokon
Well-Known Member
AndyO
Well-Known Member
That's great man, thanks so much for this!
I question how much difference the actual weed will make, it's pretty negligible with the other 20 vapes I own. But everything else you've written makes total sense
Just got my purple/lime green and after a clean and drying. So far….
I’m really digging it. Got my airport half way open and using it open currently.
I do have a question regarding the wand. I’m currently running it at 535 but it seems like pushing the line. Getting great hits but the ABV is pretty dark. Would going higher to 550 and making the ball chamber heat up faster give me a lighter roast?
Sorry might be stupid question. But I’m stoned and can’t keep smoking rn haha.
I’m really digging it. Got my airport half way open and using it open currently.
I do have a question regarding the wand. I’m currently running it at 535 but it seems like pushing the line. Getting great hits but the ABV is pretty dark. Would going higher to 550 and making the ball chamber heat up faster give me a lighter roast?
Sorry might be stupid question. But I’m stoned and can’t keep smoking rn haha.
General Disaster
Of cabbages and Kings.
Can only speak for the range of stuff I've had, but some are light and leafy, some dense, some very fine and some course in texture, etc.That's great man, thanks so much for this!
I question how much difference the actual weed will make, it's pretty negligible with the other 20 vapes I own. But everything else you've written makes total sense
If you look at what you've prepared to vape under a microscope you'll see very different shaped particles, the amount of water in them varies, the air will flow differently through them, the surface area to volume ratio will be different, the wicking ability different and so on. It's not the biggest factor but still can make a difference.
Um, I think it must be working! Try the other way round ... lower temp will equal lighter roast. But other factors like how you draw through it can also affect the temp of the weed.
TedJones
Well-Known Member
Actually just had a sub par experience with some lighter, fluffy herb. Vapor production wasn’t that great and the stem got pretty hot for 2 bowls. This strain is fine through the desktops though.
delta hotel
Well-Known Member
I've gotten better adjusting various things, but I've yet to get a consistently roasted hit after playing with ALL of the variables. The top is dark, and the bottom is just a light roast, and then there's combustion. There's no middle ground and I've adjusted the air flow, the stem control, lighters, different packs and material, Wand temps. I get good hits (usually) if it's not quitting on me before I'm done.
Granted, this is with the boro balls, I thought I liked the punchier hit, but I'm about to switch back to the original zirc balls. I like the vape, but I'd really like to continue to try to dial it in, but I'm tired of wasting bowls on combustion too.
I can't even get it to light roast really- it's the dark roast top with light bottom or combustion. I try not to mention other vapes in this thread, but my only other butane experience is with the Anvil so I'm thinking part of the remaining thing to figure out is the heating (torch or Wand, the Wand lends to inconsistent roasts too!) and maybe my draw.
Again, I like the vape but no matter what I adjust, I'm getting the same experience that I find hard to dial in, which seems odd with some many fiddley options.
Granted, this is with the boro balls, I thought I liked the punchier hit, but I'm about to switch back to the original zirc balls. I like the vape, but I'd really like to continue to try to dial it in, but I'm tired of wasting bowls on combustion too.
I can't even get it to light roast really- it's the dark roast top with light bottom or combustion. I try not to mention other vapes in this thread, but my only other butane experience is with the Anvil so I'm thinking part of the remaining thing to figure out is the heating (torch or Wand, the Wand lends to inconsistent roasts too!) and maybe my draw.
Again, I like the vape but no matter what I adjust, I'm getting the same experience that I find hard to dial in, which seems odd with some many fiddley options.
.d
Wubba Lubba dub-dub
it was easily understandable, but even without subtitles it’s a very educational video , well doneI hope the automatic english subtitles are more than “meh”
this thing keeps slapping me consistently on whichever settings and stems I tried.
The wand timeout tech is what i used for all so far and it’s so freaking convenient that i don’t need to try anything else for now until i find my go to setting
BagaDiLhuga
Member
Have you tried moving the wand adapter?
That was an absolutely amazing detailed breakdown video!! Thank you very much for the very informative content! Again, that was incredibly well shot, thought out, and detailed. Cheers
Musikchen
Member
Nice im a cat person myself.
My two are called Moe and Coops.
I have some stronger strains that always want to switch to darker look.
But the tangie for example can archive even golden brown throughout the whole bowl easily.
Stuff behaves different in all vapes, but in this one its very noticeable.
General Disaster
Of cabbages and Kings.
ALL of them? I suspect not, just all the one's you've thought of?
Guessing (correct me if I'm wrong) but you've not had it long. There's a lot to play with on these things, maybe you should have persisted with the zirc's before changing your balls so soon? Different matrix material will change a lot of factors in it's using it
Sounds like you're putting too much heat into it? Tempest is usually pretty good at avoiding combustion.
Yeah, definitely sounds like over heating. Along with airflow maybe, not a clear enough throughput of hot air.
Seriously? Every single attempt always roasts yer bud? It really does sound like you're over doing the heat.
Maybe call out some of your settings? What levels on the Ti are you going to? What wand settings? Running to time-out or solid-light? What 'pest settings you're running on for airflow? How you're drawing on it, and is it mtl or dtl. etc etc.
BushRanger
Hit It & Quit It
Brought my Tempest to a friend, which happens to be a woodcrafter, so we made this tray
Needs some more refinement, but performs lovely...
Needs some more refinement, but performs lovely...
Last edited: