Monk Debate
The monks do be debatin’
Cheapest I can find: https://www.soothingvapours.ca/product/the-dani-glass-stem-only/
The "Stunner"
- Thread starter tinctorus
- Start date
MidwestMelancholy
butane vape enthusiast
I'd chec out champhan. He makes wood stems. most are dual funtion so you could potentially get a wpa stem. I got a chillum stem like 3 in from him that works on 14 and 18mm. it. is.
is. siiick.
https://www.instagram.com/tiny.stems/?utm_source=ig_embed&utm_campaign=loading
https://www.instagram.com/tiny.stems/?utm_source=ig_embed&utm_campaign=loading
The device with stem is 130, I know the arizer glass stems also work if you flip them around as someone posted pics on discord
And the Dani glass stem from either Wes or Phil is only a few bucks
@MidwestMelancholy i absolutely LOVE @chammyphanny work,i have 2 pieces so far and I absolutely love how versatile they are, plus he's been working on some really cool new stuff
MidwestMelancholy
butane vape enthusiast
The new pipes @chammyphanny (there he is!) has been working in look dope!! I'm very impressed with my unit from him. Gonna need to talk to him about a handle and possible stand for my ball vape.
TigoleBitties
Big and Bouncy
Had some more sessions with the Stunner. I'm getting to know it better. Got some really nice flavor by hitting it halfway through the first heat-up as was suggested. I also tried pulling while heating after I felt the tip needed a re-heat. Just puffed away while heating until I saw vapor. Very nice and tasty. I love the Wand for things like this.
I just really need to find a stem that can control the heat. The Dani metal stem isn't cutting it for me. It gets uncomfortably hot by the end of the bowl.
I just really need to find a stem that can control the heat. The Dani metal stem isn't cutting it for me. It gets uncomfortably hot by the end of the bowl.
Monk Debate
The monks do be debatin’
I think that’s going to be a real limiting factor for these types of stem-based ball vapes. A lot of stems simply cannot stand up to the heat. It’s already an issue with the short woody stems on the Dani and the Dani isn’t even using balls.
It also can be an opportunity for stem makers. New ways of mitigating heat on stems because it simply hasn’t been an issue before.
Arawfish
Tree climber
I think that’s going to be a real limiting factor for these types of stem-based ball vapes. A lot of stems simply cannot stand up to the heat. It’s already an issue with the short woody stems on the Dani and the Dani isn’t even using balls.
I think the stunner would actually be pretty alright on a native Anvil stem with XL mp. The floating design of the heat shield has always held up well with the heat needed for that device and it’s relatively heavy construction makes for a good heat sink.
Edit: not sure why the quote is all weird, but I think y’all get what I was replying to.
The glass dani stem does alright with the heat, but I also added 3 6mm balls to help a bit. It does still get pretty hot after the second bowl but it seems to tame the heat better than the metal and wood stems.
I think the stunner would actually be pretty alright on a native Anvil stem with XL mp. The floating design of the heat shield has always held up well with the heat needed for that device and it’s relatively heavy construction makes for a good heat sink.
Edit: not sure why the quote is all weird, but I think y’all get what I was replying to.
TigoleBitties
Big and Bouncy
Agreed. I'm really seeing the need up close now. I almost dropped the stem it was so hot at the end of the session. I can see now why units like the Anvil and also the newly announced Tempest have a heat shield over the stem that you can presumably hold without getting burned even when the stem is much hotter.
Anyone have recommendations for the best out there now for the stunner? I was thinking of the carbon fiber ones that were announced.
Edit: Now that I think of it, the Camouflet also gets stems very hot. This new class of vape in a dynvap style that stores heat mass in a tip away from the bowl to produce convection also leads to that mass of heat leaving the tip and traveling directly down the stem as the draw is totally unrestricted. The flower can only absorb so much of it. Guessing the TA is the same.
Last edited:
Monk Debate
The monks do be debatin’
I think floating heat shields will become more popular as stem vapes get more powerful, but I do wonder if there will be some other innovations in that space to catch up to where the heaters are going.
Good read.Stunner showed up last night.
Couple quick and dirty first impressions:
1. Performance is great, and it retains (accumulates?) heat very very well. Flavour is as good or as “bad” as you want it to be. Someone made the comparison to the Vapman style of heating, which is a great way to get wicked flavours on this vape.
2. The head fits rather loosely into the glass Dani stem I have, not loose enough to be a concern but looses enough that it’s slightly annoying
3. I really do not like the janky screen holding the balls in. Probably the worst part about the whole experience was trying to get the frayed edges of the screen out of the threaded part of the head, and holding in the balls properly.
4. The bulgy nature of the dome screen means if you pack fully, you’re just squishing down herb and getting stuff stuck to the dome screen and all in the threads.
5. This thing does not like to thread fully closed at all, it gets very grindy near the last couple turns. Assumed to be because of the janky dome screen.
6. I don’t really get this push for 9mm fittings, It’s unnecessary. There is already a huge and established market for 8mm, and there’s really nothing special about the Dani stems. It’s especially redundant because an adapter is already being made.
Overall, I’ve enjoyed the few sessions I’ve had with it. I know most people like to wait until they’ve had something for a while until they give some thoughts, but I like to give first impressions immediately and then see how my opinion changes in the future. I think this vape probably has a place in my collection. Further testing required.
PS. I’ve kept quiet on this part, but I do want to just say, as a customer and a person in this wonderful (and small) community, I would have liked to see the acknowledgement of where your inspirations came from. Not just “look at this brand new vape!” While that’s technically correct, I don’t think it’s right in the spirit of things. Just like I would have loved to see all the ball vapes give credit where it was due. Just because they didn’t give homage, doesn’t mean that it’s not the right thing to do. Obviously that didn’t stop me from supporting this endeavour, but just my two cents. All that said, I’m in the camp of “there is more than enough room” and I stand by that.
I guess we will see how the second gen turns out after the release of the TA and the new MH collabo.
I too a put off by this.
If you have a revolve stem the cooling unit and mouthpiece fit my carbon stems with the correct oring
Vapor solutions on Instagram: "One of my amazing customers @screaminjwalkin have me this idea with the right size oring the @madheaters revolve cooling unit will fit the carbon fiber stems that I make, I've also got the stock @batteryfreeganz Dani v3
21 likes, 2 comments - vapor.solutions on May 31, 2023: "One of my amazing customers @screaminjwalkin have me this idea with the right size oring the @madheaters revolve cooling unit will fit the carbon fiber stems that I make, I've also got the stock @batteryfreeganz Dani v3 cooling unit in...
www.instagram.com
TigoleBitties
Big and Bouncy
Thanks, I don't have a Revolve stem, just the Dani metal one but someone mentioned that the intercooler and mouthpiece from this stem should fit inside the carbon fiber stems you make?If you have a revolve stem the cooling unit and mouthpiece fit my carbon stems with the correct oring
Vapor solutions on Instagram: "One of my amazing customers @screaminjwalkin have me this idea with the right size oring the @madheaters revolve cooling unit will fit the carbon fiber stems that I make, I've also got the stock @batteryfreeganz Dani v3
21 likes, 2 comments - vapor.solutions on May 31, 2023: "One of my amazing customers @screaminjwalkin have me this idea with the right size oring the @madheaters revolve cooling unit will fit the carbon fiber stems that I make, I've also got the stock @batteryfreeganz Dani v3 cooling unit in...
, right It should! I've seen it done, correct me if wrong @tinctorus
Yes the revolve intercooler fits great inside the carbon fiber stems I make, all you need is a bit thicker oring
And yes @tukatukera was the one who figured out what size flat screen would be ideal
Vapor solutions on Instagram: "One of my amazing customers @screaminjwalkin have me this idea with the right size oring the @madheaters revolve cooling unit will fit the carbon fiber stems that I make, I've also got the stock @batteryfreeganz Dani v3
21 likes, 2 comments - vapor.solutions on May 31, 2023: "One of my amazing customers @screaminjwalkin have me this idea with the right size oring the @madheaters revolve cooling unit will fit the carbon fiber stems that I make, I've also got the stock @batteryfreeganz Dani v3 cooling unit in...
www.instagram.com
ALSO so everyone is aware MY PTGLASS ORDER IS IN!!
If you need any Ptglass pieces just shoot me a message, preferably on IG but here is fine if you don't have IG
TigoleBitties
Big and Bouncy
Sorry I think my text was ambiguous before. I don't have a Revolve stem. I was wondering if the intercooler and mouthpiece from the *Dani* metal stem would work with your carbon fiber stems.Yes the revolve intercooler fits great inside the carbon fiber stems I make, all you need is a bit thicker oring
And yes @tukatukera was the one who figured out what size flat screen would be ideal
Vapor solutions on Instagram: "One of my amazing customers @screaminjwalkin have me this idea with the right size oring the @madheaters revolve cooling unit will fit the carbon fiber stems that I make, I've also got the stock @batteryfreeganz Dani v3
21 likes, 2 comments - vapor.solutions on May 31, 2023: "One of my amazing customers @screaminjwalkin have me this idea with the right size oring the @madheaters revolve cooling unit will fit the carbon fiber stems that I make, I've also got the stock @batteryfreeganz Dani v3 cooling unit in...
ALSO so everyone is aware MY PTGLASS ORDER IS IN!!
If you need any Ptglass pieces just shoot me a message, preferably on IG but here is fine if you don't have IG
Btw, do you think carbon fiber would be the coolest to the touch? This thing puts out so much heat to the stem I'm wondering if wood stems might split.
I was also referring to that @TigoleBitties see how @soothingvapours did it
RichardsBag
Well-Known Member
Have you tried the Carbon Fiber stem? Its the one I use most and find functions perfectly. Im going to throw the stunner in the Dobby (its practically become tradition for me with any new BFG sized product now) and see if I can make that work as a stem/pipe. Results to follow.
Oh, yes the Dani spirals fit my stems
I offer a 14mm OD stem as well, my usual ones were 12mm OD, the 14mm does feel cooler to the touch
Tswooden makes a really cool new stem that Wes has, the liner it uses is larger at the ends and narrows in the middle and leaves am air gap to stop heat transfer
MidwestMelancholy
butane vape enthusiast
Figured out a new way to heat the stunner today. My Barbecuing just got a bit more smokey.
2pumpchump
Well-Known Member
@TigoleBitties I will 2nd check but no the intercooler out of the metal v3 Dani stems do not fit .. I use a few crystal beads in the carbon fiber stems unless on a WP ....
Update my ruby high airflow cap came in yesterday .... not sure what part the airflow or the balls or both turns this thing into a completely different animal... but I'm definitely loving the extra airflow . Next cleaning I'm gonna try the zirc in the high airflow version...
I will update you guys after I break it in some more...
I use the intercoolers from my wood Dani stems in my carbon stems at home, it's the metal stem one different?
TigoleBitties
Big and Bouncy
I've just now ordered a glass stem and carbon fiber stem from soothingvapours.ca for this beast. I guess I'll find out if the intercooler from the Dani fits in there soon enough since it seems unclear still. Wish I had a few cooling beads around as a contingency. Maybe @Grover will see this and gift me some
.So I gotta say, I'm starting to see why ball-vapes are a thing. The Stunner continues to impress me for nice, smooth hits and almost perfect extraction and heating with the Wand is super forgiving. The taste is already very nice but I feel it could be even better with a better stem so that's why I pulled the trigger on the glass. Don't imagine the carbon fiber will be tastier than the Dani metal stem since it's lined with SS on the interior. Just really hoping the carbon fiber will blunt the heat.
The Stunner is passing the reach test for me. Almost certain it will supplant my Dani V3Ti completely and steal time from my Dynavaps in the rotation.
Sour Dream
Blue Dream enthusiast
Yea the wooden stem comes with a narrower and longer intercooler that’s all the way better than the metal one
2pumpchump
Well-Known Member
I have a shorty carbon fiber it's 3mm shorter than the fusion short wood ... I use from time to time high airflow ruby cap shorty and the man with the hat hanging out with me tonightI've just now ordered a glass stem and carbon fiber stem from soothingvapours.ca for this beast. I guess I'll find out if the intercooler from the Dani fits in there soon enough since it seems unclear still. Wish I had a few cooling beads around as a contingency. Maybe @Grover will see this and gift me some
So I gotta say, I'm starting to see why ball-vapes are a thing. The Stunner continues to impress me for nice, smooth hits and almost perfect extraction and heating with the Wand is super forgiving. The taste is already very nice but I feel it could be even better with a better stem so that's why I pulled the trigger on the glass. Don't imagine the carbon fiber will be tastier than the Dani metal stem since it's lined with SS on the interior. Just really hoping the carbon fiber will blunt the heat.
The Stunner is passing the reach test for me. Almost certain it will supplant my Dani V3Ti completely and steal time from my Dynavaps in the rotation.
