chromes are phased out, so if you want to buy a chrome unit i dont know who else has them. Try planetvape.ca or vaporwarehouse.com or vapornation.com we will support the discontinued model for now but i would suggest you get a another color.
Discontinued The Persei Vaporizer for herbs and concentrates.
- Thread starter THC SCIENTIFIC
- Start date
chromes are phased out, so if you want to buy a chrome unit i dont know who else has them. Try planetvape.ca or vaporwarehouse.com or vapornation.com we will support the discontinued model for now but i would suggest you get a another color.
Just ordered my Okeanos and ti coils. Now just need an AAF, PTFE bushings, and a nibbler XL and I'll be happy. Oh and all the new shit that's coming. Let's do this.
SpruceGruve
Bag of sand in hand,Eyeing up the gold statue
Sorry to jump in with just one post,I'm looking on the w9tech website right now,and a lot of the products I want are sold out or on back order
I have tried to read through all 650 pages of this thread but it's hard to not skip a couple pages at a time.
I'm just curious if I buy a persei starter kit,ss kit,the core,nibbler x,and a couple double tip mouthpieces.
Will I be able to buy the hercules and extra rods in a couple weeks-months?
And what ever happened to the hammer upgrade?
I assume the persei 8(unavailable) comes with a iris attachment?or will that be sold separately
Thanks,I'll keep reading different threads and check back here later or tomorrow
I have tried to read through all 650 pages of this thread but it's hard to not skip a couple pages at a time.
I'm just curious if I buy a persei starter kit,ss kit,the core,nibbler x,and a couple double tip mouthpieces.
Will I be able to buy the hercules and extra rods in a couple weeks-months?
And what ever happened to the hammer upgrade?
I assume the persei 8(unavailable) comes with a iris attachment?or will that be sold separately
Thanks,I'll keep reading different threads and check back here later or tomorrow
You could try the canadian distributor...planetvape.com.
SpruceGruve
Bag of sand in hand,Eyeing up the gold statue
According to the website I it's down,that's why I went to w9tech.
Thank you for the quick reply though
Thank you for the quick reply though
I know vaporwarehouse.com has them.
) : what is the best of your items to vape oils ?
Darb
Well-Known Member
Make sure you buy the latest version. If not you'll have to send your tops away when they have problems. Nobody wants to purchase a new vape and have to possibly ship it off right away. Takes a while for packages to go between California and Alberta sometimes. If Planet Vape has the latest version I would hold off until their site is back up. Quickest shipping for us Canadians and customer service is second to none. (Free shipping over $130 too)
Kevdog420
OMMP Patient
@THC SCIENTIFIC Sorry if this has already been asked but when could we expect the K.I.S.S. carts to ship with ti coils? I have been wanting to buy one as a Christmas gift for a friend but I've been waiting on the ti coils..
They will most likely be after Christmas . We must deplete current stock of the kiss carts .
Kevdog420
OMMP Patient
Awesome thank you so much! Looks like it might have to be a late new years present then
![:\](/i/s/hmm.gif "Hmm :\")
YES. If it breaks, you could get another for the same price as one new one from an official seller. lol
I woke up in Hell this morning!!! fuck!!!
OHHH NOOOOOO! How on earth did that happen?
EDIT: Only thing I can think of that might get it out is a pair of long tweezers with the slanted end? That or a pick like the use at dentists offices and dab tools. Maybe even the cleaning tool they send with the herc? That PTFE is soft so if you could get something sharp in at an angle and pull it out maybe? Also, definitely get some PG or VG and lube the inside up real good, should make it alot easier to slide out. I use glycerin on my o-rings everytime i put it on just so it slides and seals better.
OF
Well-Known Member
Bummer.
I think you're OK though, as long as the ring stays in the mouth of the inner tube.
I'd make a piano wire hook and fish it up through the hole in the plug. Then push a chopsick or something like it into the hole as well to do two things. First, retain the hook. Secondly, hopefully straighten the pulb up some.
Then grab the piano wire with pliers and pull it out. A bit of lube dribbled down the tube just before the pull should ease the ring over the edge.
That's how I'd start anyway.
Good luck.
OF
I think you're OK though, as long as the ring stays in the mouth of the inner tube.
I'd make a piano wire hook and fish it up through the hole in the plug. Then push a chopsick or something like it into the hole as well to do two things. First, retain the hook. Secondly, hopefully straighten the pulb up some.
Then grab the piano wire with pliers and pull it out. A bit of lube dribbled down the tube just before the pull should ease the ring over the edge.
That's how I'd start anyway.
Good luck.
OF
DatOilVape
Member
Will the hammer ever be back on the w9tech site?
Soon !! Thc is working on it !
THC, any idea when the Clearance sale is supposed to start? Im contemplating placing an order soon, but I want to wait to make sure nothing is going on sale that Im ordering! 
OF, good idea. I would suggest doing something similiar. The PTFE is pretty soft. I know a needle can go into it easily. Maybe using a reformed fish hook or needle to get it up into the center hole then hook into the material and use a chopstick/bamboo skewer to straighten it out before pulling down? Or if you could somehow manage to cut the O-Ring without it getting lost even deeper in the Nibbler then you could fish out the mouthpiece and the o-ring separately. Hope it works out for you.
Im still lost as to how this happened? Did you unscrew the herc from your persei with the nibble attached? I never do ANYTHING before removing the nibbler. Especially after breaking one and having to replace it.
OF, good idea. I would suggest doing something similiar. The PTFE is pretty soft. I know a needle can go into it easily. Maybe using a reformed fish hook or needle to get it up into the center hole then hook into the material and use a chopstick/bamboo skewer to straighten it out before pulling down? Or if you could somehow manage to cut the O-Ring without it getting lost even deeper in the Nibbler then you could fish out the mouthpiece and the o-ring separately. Hope it works out for you.
Im still lost as to how this happened? Did you unscrew the herc from your persei with the nibble attached? I never do ANYTHING before removing the nibbler. Especially after breaking one and having to replace it.
Last edited: