Discontinued The Persei Vaporizer for herbs and concentrates.

[masaki]

Don't be sorry this is fun stuff!

I'll take some photo's and add them.
Give me 22 minutes!

You should a take pic of the bender/ash catcher in action I still feel like your drinking water lol

 

[ataxian]

You should a take pic of the bender/ash catcher in action I still feel like your drinking water lol

Get a Nibbler!

 

[Silver420Surfer]

What % coil should I use with wax in the Herc with the white coil? My concentrate passes the foil test w/out sparking or leaving residues. Not gold/yellow in color though, 10/10 smell, 9/10 taste, able to hold w/out melting to/sticking to fingers. Will slightly soften if left in hot car, but will never turn runny. Kinda looks like
This for color reference. I also use a honeycomb/crumble(kinda soft,need scoop to load on Ti nail or cartridge, have to slightly melt with heat to even attempt to use a pointed/ball ended dabber) which is always light yellow/gold in color.

Thanks for your help. With only 2 coils, I want to be very certain before I cut them.

edit-I have had my setup for a week and not loaded it yet, I was on a little vacation from here and unable to find much information on the "coils". The Herc manual makes no mention of cutting them at all and then I read about some of you guys/gals with 30% coils or 70% coils and I was like .

 

[BLAZING OG]

Pinnacle water tool is only $50 bucks to FC members, with the right male to male adapter you can hook up to Bender nicely.

http://fuckcombustion.com/threads/pinnacle-pro.10651/page-49#post-467033

 

[PhotoRider]

Pinnacle water tool is only $50 bucks to FC members, with the right male to male adapter you can hook up to Bender nicely.

http://fuckcombustion.com/threads/pinnacle-pro.10651/page-49#post-467033

He speak the truth....

 

[ataxian]

Pinnacle water tool is only $50 bucks to FC members, with the right male to male adapter you can hook up to Bender nicely.

http://fuckcombustion.com/threads/pinnacle-pro.10651/page-49#post-467033

BLAZING OG:
Thanks for the encouragement!

I just ordered one.

No more MAC GIVERING!

 

[masaki]

Pinnacle water tool is only $50 bucks to FC members, with the right male to male adapter you can hook up to Bender nicely.

http://fuckcombustion.com/threads/pinnacle-pro.10651/page-49#post-467033

Gonna grab this bad boy )
Thanks for spreading the love

 

[Patrick Hughes]

Pinnacle water tool is only $50 bucks to FC members, with the right male to male adapter you can hook up to Bender nicely.

Thank you so much for the heads up on this deal. I just grabbed one too. I love my Nibbler XL, but the top piece keeps coming off and getting stuck way up the tube.

 

[ataxian]

Gonna grab this bad boy )
Thanks for spreading the love

I'm ready for the next chapter!
Weekly Usage!

 

[WaxOnWaxOff]

Is "The Bender" mostly convection or conduction heating?

Anyone have any thoughts on how it compares to the Arizer Solo?

 

[PhotoRider]

I'm ready for the next chapter!

But are we???

Is "The Bender" mostly convection or conduction heating?

Anyone have any thoughts on how it compares to the Arizer Solo?

Convection used correctly, but will do both if the rod is blasted to HOT

 

[PhotoRider]

delete ....

 

[ataxian]

Anyone have any thoughts on how it compares to the Arizer Solo?

I use the SOLO a lot. (in fact I have 2 of them)
However the BENDER takes a little more finesse.
The BENDER Flavor wise is hard to beat.
What gets me "MAX FLIGHT" = BENDER
Practical = SOLO

I use both!

 

[WaxOnWaxOff]

Thanks guys!! I don't mind if it takes some technique or some extra time, and I'm happy to hear there is some convection going on.

Ataxian- how would you compare the efficiency to the solo? Do you find it takes more materials to get the same effect with the bender?

 

[ataxian]

Ataxian- how would you compare the efficiency to the solo? Do you find it takes more materials to get the same effect with the bender?

The BENDER is full luxury!
It is the most enjoyable device I own.
The effect is different than the SOLO.
When I do woodworking I use the SOLO.
By the POOL relaxing I use the BENDER.
The BENDER is very powerful to me!
The SOLO I love the way it keeps me focused.

I have a OZ+ of FLOWER per week so I really am not the one to ask about usage.
However the BENDER does require more medicine.
The BENDER will kick your A@@!

I love both devices.
The effect is different between the 2.
It depends what I'm doing?

I personally need/use both!

 

[THC SCIENTIFIC]

Black rods are here.

Going on the site in 5 hours.

 

[Patrick Hughes]

Then I will go to the site in 5 hours and 1 minute.

 

[Silver420Surfer]

Count me in as well

 

[Caligula]

Black rods are here.

Going on the site in 5 hours.

Hurray!

 

[Silver420Surfer]

Am i the only one finding the "feet" on the coils utterly useless?

Persei/Herc not working for me at all. Should the ceramic heater rod "light up" and be visible when button is engaged with the coil removed. I am getting ZERO heat when button is pressed in for 10+ sec. I noticed this after loading my buffer.3 +.2 on a 40% coil. No matter how long I pressed the button, wax remained the same as when loaded.

 

[THC SCIENTIFIC]

i know what the issue is.

Take this part and 2 flat head screw drivers, hold the center pin from one side using a screw driver and unscrew the other side about 1/4 turn.

This should get it to fire up.

 

[Caligula]

i know what the issue is.

Take this part and 2 flat head screw drivers, hold the center pin from one side using a screw driver and unscrew the other side about 1/2 circle.

This should get it to fire up.

FUUUUUUUUUUUUUUUUUUUCK, I has having heating issues and tried this. Just fried my top. Released the magic smoke from behind the button.

@BLAZING OG @THC SCIENTIFIC

 

[Silver420Surfer]

i know what the issue is.

Take this part and 2 flat head screw drivers, hold the center pin from one side using a screw driver and unscrew the other side about 1/2 circle.

This should get it to fire up.

Not comfortable doing this at all.

 

[Caligula]

Not comfortable doing this at all.

Yea....

Try rebuilding everything from the ground up. I find that solves the issue for me, however it comes back from time to time. I was hoping the other "fix" was going to solve that, lol.

 

[Silver420Surfer]

Also noticed my Adjustment tool doesn't fit the bottom of my Persei. Only one of the 2 "nubs" fit into the hole at a time.