The Mighty/Mighty+ by Storz & Bickel
- Thread starter Roger D
- Start date
cliffhanger1
Well-Known Member
not with the + but with the OG Mighty which is the same to pull of the screen
it is very easy
Hawaiian
...
Yeah, if there's a trick to avoid scratching, I'll take it. But then, when you put a new one back in, I think that it will probably scratch the bowl.not with the + but with the OG Mighty which is the same
it is very easy
StopMakingSense
Member
For the cooling unit, I immediately popped out the coarse screen and replaced it with these screens from Amazon. A lot of recommendations from folks as a great easy upgrade.
Does anyone go for a finer screen than these? They aren't as fine as the screens that came with the Mighty+ but they are very close and fit like a glove.
Does anyone go for a finer screen than these? They aren't as fine as the screens that came with the Mighty+ but they are very close and fit like a glove.
Vape_ninja
Well-Known Member
i find the design of the cooler somehow stops herb from going near the mouth piece, its quite clever
those still dont look at all fine compared to the arizer v tower /extreme q elbow screens , but remember very tight mesh screens will increase draw resistance a lot
if you end up with herb in your mouth you are grinding it too finely and/or drawing way too madly on the vape
those still dont look at all fine compared to the arizer v tower /extreme q elbow screens , but remember very tight mesh screens will increase draw resistance a lot
if you end up with herb in your mouth you are grinding it too finely and/or drawing way too madly on the vape
HomerSchwag
Well-Known Member
New screens purchased from S&B are dome shaped, you just drop it in & gently press into place. Never felt it scratching anything, just kind of pops into place.Yeah, if there's a trick to avoid scratching, I'll take it. But then, when you put a new one back in, I think that it will probably scratch the bowl.
The lid’s edges on the aluminum cap are sharp, and also deform quite easily. If the cap gets turned slightly as you remove, it can scratch easy. That said, most of my scratches are from removing screens and overdoing scraping off crusted areas on the walls, don’t do it guys! Most of the crust was caused from doing the oil pad on top of a half bowl trick….
I do wonder if using a bubbler reduces the risk of metal intake?
Last edited:
Vape_ninja
Well-Known Member
if its deep enough i think a water bubbler would remove particles
canadianvapelife
Well-Known Member
Can I throw a nug in instead of grinding? I feel like remember hearing Jerry from Troy and Jerry say that he does this.
Vape_ninja
Well-Known Member
you can but its not very efficient the center wont get heated , its best to grind for even vapor production
vapviking
Old & In the Way
You can. If bud is really dense, better to at least rough it up a little to open it up. Mighty can cook it up, but I agree it will not vape as efficiently as with ground flower, the clouds will be a little stronger with ground material, and you can get more in the chamber when you grind.
MGG
Well-Known Member
I won my mighty in a competition.
The precautions would be to not scratch your bowl.
As mentioned I also take some solace in the fact that this is the closest to what is recognised as an actual medical grade vape.
I'm considering upgrading to Mighty+ but waiting for more info. Was hoping for a bigger leap in the tech.
This is the ONLY way I vape. I don't grind. Imo this is so underrated. I prefer vaping whole nug. Yes it takes longer to vape and is a tad wasteful but you can always finger grind the avb when it's dry or save it for edibles.
The benefits of not grinding is that the terpines evaporate slower which for me leads to a smoother tastier smoke that's more sustained throughout the whole session rather than 3 great hits followed by some harsher not as tasty ones. But your material has to be very resinous to begin with.
I recommend packing tight (on the verge of over packing) then 190c for sativa. 170c for indica (controversial temp choice but this is my personal preference. I always prefer lower temps for indicas myself).
I'm not saying this is how everyone gotta do it. If you like the grind no disrespect. This is just how I've been doing it for years now.
Seantagon
Well-Known Member
Hey do you go about that extra 5% off? I subscribed to their list, but got nothing.
Petetbay
Well-Known Member
Use code ILOVETHC in checkout for 5%
MGG
Well-Known Member
Enjoy
My temp choice is not about the terpenes, for me personally (and it's completely subjective) Indicas are too heavy for me, so I find if I lower the temp the high becomes a bit more functional.
Last edited:
Damn dude, I’ve been missing out all these years….. The flavor profile on a dry tight nug of lemon haze was excellent from 180c 190 and even at 200 end of session. Toasted off at 210 and no burnt taste. Maybe the vapor amount is less at 180, but I’m fine with that. Thanks for the heads up, this nug is toast and so am I, maybe there was more bud in the oven with the compact budEnjoy
181-D693-C-4-BDF-490-A-B1-C0-483-F990-BE993 hosted at ImgBB
Image 181-D693-C-4-BDF-490-A-B1-C0-483-F990-BE993 hosted in ImgBB
10-C53-B45-7-CE2-4365-85-B9-656-CB1-D16928 hosted at ImgBB
Image 10-C53-B45-7-CE2-4365-85-B9-656-CB1-D16928 hosted in ImgBB
9-A4-D5866-2-C09-4-CA5-AF66-C1-CE452-BFF76 hosted at ImgBB
Image 9-A4-D5866-2-C09-4-CA5-AF66-C1-CE452-BFF76 hosted in ImgBB
I just took a brush and wood stick too it at least
CFEA01-DD-A49-E-4-EBC-A412-2-EA58260-F177 hosted at ImgBB
Image CFEA01-DD-A49-E-4-EBC-A412-2-EA58260-F177 hosted in ImgBB
Last edited:
David Root
Well-Known Member
Going to try a nugget tonight in the Crafty.
David
David
canadianvapelife
Well-Known Member
I also just tried a nug. Chose one that was on the drier side and it worked great. A little whispy on the vapour but definitely full of flavour. And yes the nug is cooked and so I amDamn dude, I’ve been missing out all these years….. The flavor profile on a dry tight nug of lemon haze was excellent from 180c 190 and even at 200 end of session. Toasted off at 210 and no burnt taste. Maybe the vapor amount is less at 180, but I’m fine with that. Thanks for the heads up, this nug is toast and so am I, maybe there was more bud in the oven with the compact bud
181-D693-C-4-BDF-490-A-B1-C0-483-F990-BE993 hosted at ImgBB
Image 181-D693-C-4-BDF-490-A-B1-C0-483-F990-BE993 hosted in ImgBBibb.co
10-C53-B45-7-CE2-4365-85-B9-656-CB1-D16928 hosted at ImgBB
Image 10-C53-B45-7-CE2-4365-85-B9-656-CB1-D16928 hosted in ImgBBibb.co
PS: damn my casing is dirty AF, don’t judge9-A4-D5866-2-C09-4-CA5-AF66-C1-CE452-BFF76 hosted at ImgBB
Image 9-A4-D5866-2-C09-4-CA5-AF66-C1-CE452-BFF76 hosted in ImgBBibb.co
CFEA01-DD-A49-E-4-EBC-A412-2-EA58260-F177 hosted at ImgBB
Image CFEA01-DD-A49-E-4-EBC-A412-2-EA58260-F177 hosted in ImgBBibb.co
vapviking
Old & In the Way
Before I saw your last sentence I was constructing the reply in my head, "Dude, you know that little brush that comes with Mighty?..."Damn dude, I’ve been missing out all these years….. The flavor profile on a dry tight nug of lemon haze was excellent from 180c 190 and even at 200 end of session. Toasted off at 210 and no burnt taste. Maybe the vapor amount is less at 180, but I’m fine with that. Thanks for the heads up, this nug is toast and so am I, maybe there was more bud in the oven with the compact bud
181-D693-C-4-BDF-490-A-B1-C0-483-F990-BE993 hosted at ImgBB
Image 181-D693-C-4-BDF-490-A-B1-C0-483-F990-BE993 hosted in ImgBB10-C53-B45-7-CE2-4365-85-B9-656-CB1-D16928 hosted at ImgBB
Image 10-C53-B45-7-CE2-4365-85-B9-656-CB1-D16928 hosted in ImgBBPS: damn my casing is dirty AF, don’t judge9-A4-D5866-2-C09-4-CA5-AF66-C1-CE452-BFF76 hosted at ImgBB
Image 9-A4-D5866-2-C09-4-CA5-AF66-C1-CE452-BFF76 hosted in ImgBB
CFEA01-DD-A49-E-4-EBC-A412-2-EA58260-F177 hosted at ImgBB
Image CFEA01-DD-A49-E-4-EBC-A412-2-EA58260-F177 hosted in ImgBB
Not to judge, just to remind that the air intake is right below those dusty fins in photo2. Not that you're gonna get a mouthful, but over time dust does begin to clog the air inlet port (that's inside the case, not visible from outside)
First opportunity, I'm putting a nug of Black Triangle Kush in the bowl for the memories, and the ride!
I need to blow that shit out with something…. Last time I tried to remove the abv and dust with qtips didn’t work well
That's what i am doing as well with the dosing caps. Especially nugs more on the drier side seem to be a good choice.
I plan to check out different moisture levels more systematically - anybody can share experience on that?
MGG
Well-Known Member
Damn dude, I’ve been missing out all these years….. The flavor profile on a dry tight nug of lemon haze was excellent from 180c 190 and even at 200 end of session. Toasted off at 210 and no burnt taste. Maybe the vapor amount is less at 180, but I’m fine with that. Thanks for the heads up, this nug is toast and so am I, maybe there was more bud in the oven with the compact bud
I'm glad I inspired people to try this.
These are some other personal strategies I use.
When vaping whole-nug you can poke the bud with the pick tool to get it out, (be careful with the plastic pick tool in the hot oven, it could melt)
I will sometimes flip/reverse the bud and vape the top part.
Usually this is as far as I'll go but you can also basically take it out and push it in your fingers, essentially finger grinding it, because it's so dry it will basically be dust and often is easier than physically grinding.
I wish I could share a photo but I have this massive jar filled with whole-nug AVB xD
sometimes my smoker buddies like to smoke it.
I definitely find if the material isn't particularly resinous it can feel wasteful, but if it's good material I will still get epic clouds and the best flavour.
It's a bit of a luxury thing, a bit of a lazy thing hah!
canadianvapelife
Well-Known Member
So I have these nugs that are coated in distillate and then rolled in kief. They don't grind the nicest and you lose a bunch of the kief. Since I basically only use vapes now I don't really have a way to consume them until the whole putting nugs in the mighty thing came up. I'm worried the distillate may drip off and potentially ruin the vape though. Would anyone have some insight into this?