The Mighty/Mighty+ by Storz & Bickel
- Thread starter Roger D
- Start date
Vaporcussion
Well-Known Member
Concentrates. I've never used liquid on the pads, (as the only access I have are those liquid cartridges), but I got a hold of some wax (dab). I put some in the capsule with the built in pad, temp at 410, and it worked great! Capsule/pad system keeps the bowl clean, and it's much more relaxing than using my FF2. Anyway, I remember reading that concentrates need to be closer to 500 degrees, but 410 seems to be working just fine
vaporist4LIFE
Well-Known Member
Got the wpa on the list, any other accessories that might be useful ?
HellsWindStaff
Dharma Initiate
Anyone know a good way to clean bottom screen?
c76man
In search of the best terps and smoothest vapor
Did you remove it? If not, you can use the orange tool, dental pick, or similar to loosen the edges and pull it out. Then an iso soak or a very careful torch/lighter so as not to damage the screen.
bigfiend
New Member
Hey everyone, i purchased a mighty on 420 but i haven't been satisfied with the size or amount of hits ive been getting especially after reading about other peoples experiences. i usually fill up a dosing capsule about 3/4 of the way, put a screen on top, and vape it starting at around 365F, increasing the temp gradually as i go. I would say I only get 4-5 alright hits then it peters out. Any tips for optimal technique?
vaporist4LIFE
Well-Known Member
https://www.sneakypetestore.com/products/crafty-mighty-14mm-glass-adapter?variant=12314993862
Does anyone have experience with this ?
Does anyone have experience with this ?
Vaporcussion
Well-Known Member
You grind your herb, yes?
Is that 3/4 packed firm or loose? It should be firm, not floating around.
When you say putting a screen on top, do you mean in addition to the top of the capsule?
S&B recommends starting at 356F, going to 374 (180-190c)
bigfiend
New Member
Its packed pretty firm, but i could try tamping it down more. and yes ive experimented with putting a screen under the top of the dosing cap when i dont fill it all of the way. What is the best draw technique? I also have a Da Buddha and Arizer Solo for comparison.
HellsWindStaff
Dharma Initiate
I haven't, will probably just get some new ones (fine screen) cause my CU fine screen is pretty warped from repeated torching, Ty for tool suggestions
ambertrichome
Well-Known Member
Vote 1 for the Muzz mod
Just make sure you follow the excellent detailed directions to the letter and it should last indefinitely
zippy
Well-Known Member
I had one from Vapefiend the 'Easy Flow' type.. It a good idea but not properly thought out imo.. You ALWAYS need to lift by the glass.. If you lift by the Black body the glass will fall out and break lol .. Mine lasted one day till i forgot picked the lid up and the glass fell out as it is not a snug fit.. It also hot glass if you lift by the glass lol
Carlos8400
Well-Known Member
Ditch the capsules, fill the oven nice and somewhat tight, start at 195c (383F), when vapour production goes down, double click the on button, which will set it in boost mode 210c (410F).
Couple puffs on boost mode should leave you with evenly brown herbs.
Doing this i get big hits and nice darkish brown AVB, without faffing with the temp too much.
Last edited:
cloudsosmoke
Well-Known Member
i wonder if @Ratchett 's new hard plastic machine could make a better version of easy flow adapter
re screen cleaning
cant confirm but
someone posted about just bending screen down over the bump in the middle
at the bottom of the bowl - its then supposed to fall out
..im such a lazy stoner i havent tested it myself yet
re screen cleaning
cant confirm but
someone posted about just bending screen down over the bump in the middle
at the bottom of the bowl - its then supposed to fall out
..im such a lazy stoner i havent tested it myself yet
vapviking
Old & In the Way
Get a stand for Mighty. Delta3d (@Ratchett makes nice stuff!) has an inexpensive one, 3d printed in assorted colors. I got the 'glow in the dark'.
It can depend a lot on the herb itself. Good and dry is better.
Also, after first temp is reached, let it simmer (heat soak, I think some call it) for another minute before your first hit.
Maybe try going straight to higher temperatures without stepping? But you should be getting some satisfying hits at the 365...
vaporist4LIFE
Well-Known Member
It sits by itself with the pick/plastic sitting tool inserted backwards ? Anyone know what tbh e standard shipping is like on S&B website ? 2nd day air isn't much more , I'm guessing ups if they are using phrases like 2nd day air
vapviking
Old & In the Way
It does, but not very well.
Mine has a broken housing piece thanks to a simple face-plant type fall on a table. If you want it to stand up, a stand will be indispensable.
Enjoy!
tonuzzi
Spoon Dogg
My housing broke after 6 months of normal use and I babied it as I do with all my vapes. A simple face-plant type fall on a table chipped my top where the Cooling unit and the heating chamber screw together. I wasn't impressed!
Vaporcussion
Well-Known Member
The Mighty doesn't require any specific technique, it just works! Not sure what the problem is...
vaporist4LIFE
Well-Known Member
A question for anyone who recently ordered a mighty from puffitup. Do they come with capsules ?
biohacker
H.R.E.A.M
You must have missed some of the comments above. The problem IMO is the dosing capsule. However, as mentioned load size, density, temperature all play a factor. Performance isn't the same with the capsules.. for massive clouds, full bowl slightly tamped, finer grind, and upper temps is the way to go....and hit it hard!
Good question, I was under the impression that only the Mighty Medic came with the capsules, but perhaps things have changed.
vaporist4LIFE
Well-Known Member
@biohacker just heard back from randy and they are not included .not that expensive though I got the 40 pc. Set and 6 pc concentrate set for a great price .as usual. There's an analogy in there about about always delivering satisfaction/pleasure but I like leave it at that 
Super psyched about getting mighty and trying these capsules
Super psyched about getting mighty and trying these capsules
Vaporcussion
Well-Known Member
I'm confused, I wasn't answering your post! I was responding to @bigfriend, a new member with 2 posts so far. What you described above is the technique that works for you, cool. I love the capsules, get big hits, and don't vape on high temps (349-374) Imo the mighty works well with both full bowl or capsules.
biohacker
H.R.E.A.M
You said you didn't know what the problem was, which was explained by some members including myself. That's great that you found a technique that works well for you, I personally would love to see these "big hits" on low temp with the capsule. I'm not trying to debate this with you, but it doesn't really help the member asking when you don't offer any potential solutions.
I've posted my video with .1g a few pages back, I would welcome yours. Again, MANY variables at play here, as already mentioned.
I've posted my video with .1g a few pages back, I would welcome yours. Again, MANY variables at play here, as already mentioned.