The Mighty/Mighty+ by Storz & Bickel
- Thread starter Roger D
- Start date
blablablabla
Member
so much easier to clean tho!
damn what is abuse according to you ?
I think convection heating with every herb and fine grind high temp nearly combust or combust little bit. I dont know about the caps but that might be whole different experience.
you can absolutely find it cheaper from third parties, I asked sb about the warranty and they dont mind where its coming from, just S/N is important
biohacker
H.R.E.A.M
Yes! I completely forgot to mention that when I use my technique, I actually remove the screen first and it always amazes me how much black dust is under there. Nothing like a sparkling clean Mighty bowl.
so much easier to clean tho!
damn what is abuse according to you ?
I think convection heating with every herb and fine grind high temp nearly combust or combust little bit. I dont know about the caps but that might be whole different experience.
You're right about the capsules, I think when I buy a new Mighty i'm going to try to use them exclusively. I'm also not even really interested in a muzzmod anymore, and I wanted nothing but the muzzmod before. Just my evolution with this vape I suppose. I'd use it as a portable mainly, and not through water as I used to so much. I put about 2g/day through it for about a year, mostly with a muzzmod at 210c, but also using it dry often when I had to live in a hotel for 6 months last year. I don't take much care with charging practices, just charge whenever even if it's warm. Never really noticed much battery degradation with the Mighty...wish the Crafty would be as robust!
I feel the caps add more convection which goes against what most people think, but that's my experience. Perhaps more radiant heat, but I feel direct load adds more conduction IME. The vapour output illustrates this as well IMO.
S&B is awesome for this! I just found out that Tweed hiked their prices for all their devices, and the Mighty now costs MORE than direct from S&B! I think i'd buy mine again from Puffitup.... best deal from a retailer i've found, and I think you can deal direct with Randy for RMA instead of S&B? Can anyone confirm? That guy knows alot about S&B Rma's!
Vapor4me
Well-Known Member
I got mine for about 250 eur earlier this year, had been hunting for a great deal for awhile... I wonder tho, if this would negatively affect the kind of service one can expect from S&B after an RMA?
blablablabla
Member
I dont mind the free 4 piece rather than that I get it full maxed out for about 280
according to them not at all (but take a photo of your S/N, that was good deal. Keep hunting, good luck to you
disGRUNTled
Well-Known Member
Purple Elephant bowls in the Mighty. Drinking a Muy Bonita Double Brown Ale from Funky Buddha. Watching Grind Mode Cyphers on Youtube.
CanadianFlowers
Vapor Enthusiast
Hey guys, I'm finally gonna send my mighty in for repair. Ill be shipping it to the u.s whenever they approve of my RMA (burnt out starter button)
my question for you guys is-
Will I have to clean the mighty before I send it out?
my question for you guys is-
Will I have to clean the mighty before I send it out?
I would for anything going over the border
CanadianFlowers
Vapor Enthusiast
blablablabla
Member
can you share with us some details pic about how you connected the whip to the rig joint? thank you, thats very refreshing post after bunch of text, that pool must be very hanful when its really hot outside, nice spot for chill! hope you will post morePurple Elephant bowls in the Mighty. Drinking a Muy Bonita Double Brown Ale from Funky Buddha. Watching Grind Mode Cyphers on Youtube.
biohacker
H.R.E.A.M
@disGRUNTled Never heard of Grind Mode Cypher until you posted the videos, and i'm digging it!! 
disGRUNTled
Well-Known Member
pretty simple really I got this whip adapter from new vape , hooked it up to end of the Mighty mouth piece then you can use any rig that is 14 or 18 mm no complaints and I have been using it for a while . And yes the pool gets plenty of use in the Fl heat.
https://www.newvape.com/whip-adapter-to-fit-male-glass-2809
Ha ,I watch ton of Grind Mode when I am high AF one of my go to channels on Youtube.@disGRUNTled Never heard of Grind Mode Cypher until you posted the videos, and i'm digging it!!
ChooChooCharlie
Well-Known Member
This post is for capsule users:
Shout out of thanks to @Bomb33 for his post about regular cleaning of the CU screen area. I don't remove the CU screen like Bomb does, because I'm lazy. Just a quick swabbing around the ring where the CU screen sits. Every session. You can use precision q-tips like Fran Wilson Nail Tees or just fold up a piece of paper towel like Bomb does. This is the key to avoid sticky capsule tops. Excellent, Bomb! Have been doing it regularly for the past two weeks. Big drop in cleaning frequency (I used to change out CU's when my capsules got resin goo stickiness) Proactive warm resin swabbing is the Bomb!
Shout out of thanks to @Bomb33 for his post about regular cleaning of the CU screen area. I don't remove the CU screen like Bomb does, because I'm lazy. Just a quick swabbing around the ring where the CU screen sits. Every session. You can use precision q-tips like Fran Wilson Nail Tees or just fold up a piece of paper towel like Bomb does. This is the key to avoid sticky capsule tops. Excellent, Bomb! Have been doing it regularly for the past two weeks. Big drop in cleaning frequency (I used to change out CU's when my capsules got resin goo stickiness) Proactive warm resin swabbing is the Bomb!
Vaporcussion
Well-Known Member
Exactly; I'm right there with you. I've been using those little 1" baby iso wipes around the ring, following up with a wet paper towel. And not every session. This idea sounds better!
blablablabla
Member
Did somebody tried taking out the capsule with the cooling unit and putting it upside down, the condensated air will get you one more extra hit. I found this on reddit, is that true?
blablablabla
Member
Purple Elephant bowls in the Mighty. Drinking a Muy Bonita Double Brown Ale from Funky Buddha. Watching Grind Mode Cyphers on Youtube.
Skywalker420
New Member
Hey guys
got ill over the weekend so I tested my fresh cleaned Mighty yesterday the first time with the capsules and I have to say that it's a huge difference to how it performed before. The vapor is so much smoother and a little bit tastier too. The capsules are a little bit tricky when you're outside but it's definitely worth it.
Also ordered the Mighty Waterpipe Adapter (CU-Mod v2) from delta3dstudios to use it with my bubbler.
With this adapter it will work more as a convection vaporizer I think so maybe this improves the taste again a bit.
got ill over the weekend so I tested my fresh cleaned Mighty yesterday the first time with the capsules and I have to say that it's a huge difference to how it performed before. The vapor is so much smoother and a little bit tastier too. The capsules are a little bit tricky when you're outside but it's definitely worth it.
Also ordered the Mighty Waterpipe Adapter (CU-Mod v2) from delta3dstudios to use it with my bubbler.
With this adapter it will work more as a convection vaporizer I think so maybe this improves the taste again a bit.
vapviking
Old & In the Way
In my experience, putting a dosing cap in Mighty upside down will force/wedge it in tight, making it harder to remove the cap, which is tapered and bigger at the top than at the bottom.
Maybe if no screen in cu it would not be forced down so much, but I don't see that there would be difference in vape result one way or the other.
Clean vape/Happy vape!
Glad you are enjoying Mighty again.
I love Mighty thru water, but I do think taste itself is sacrificed slightly
FISHSTICKS
New Member
Hey FC , just got a Mighty used with no charger , was wondering if I can use a universal adaptor/charger with the correct voltage and tip or if I have to purchase the official one.
Thanks in advance
Thanks in advance
vapviking
Old & In the Way
I've substituted and used the 12V car adapter that powers a Nitecore D2 battery charger. 12 being the car voltage, that is. -- Atm I don't recall the output of the Nitecore adapter, but it matched the output voltage & tip (though lower amps) of Mighty's wall adapter. It did work, but I've only charged twice ever like this.
All that said, the strong and sound recommendation is that you get a factory charger, and they're not very expensive! Mighty is capable of running on it's charger even when battery is dead. Not that this is a good practice, but be safe and use the right adapter!
FISHSTICKS
New Member
To be fair to S&B the charger is reasonable priced and will buy one , it's just that I need to test the Mighty and check that it works as the seller got it in a job lot without the charger he's not a vaporist .I also don't wanna use a universal one and break what could potentially be a working mighty at a reasonable price and have to end up paying more to fix it than new lol.
Portable battery sounds good maybe that would be the way to go to test the unit
Last edited by a moderator:
biohacker
H.R.E.A.M
vaporist4LIFE
Well-Known Member
Wow that was fast ! Many thanks .top temp ? Have you tried the other WPA that PIU carries ?
biohacker
H.R.E.A.M
Yep, always max temp 210c for bong snaps! Not the densest vapour output due to the mainly convection profile, but a long heat soak can change that. I've only used the SonG and muzzmod, I haven't seen what else PIU carries, but I imagine it's the standard WPA that is kinda meh.