The Mighty/Mighty+ by Storz & Bickel
- Thread starter Roger D
- Start date
blackstone
Well-Known Member
This video gives a pretty amazing insight into parts of the factory, work life there, the numbers they must currently produce and sell, and some stories from the company's past.
I found it interesting to see they do still produce and sell the OG Mighty in good numbers currently.
What a cool place to work, long may their prosperity and success continue.
Thank you Troy and Jerry for this!
I found it interesting to see they do still produce and sell the OG Mighty in good numbers currently.
What a cool place to work, long may their prosperity and success continue.
Thank you Troy and Jerry for this!
blackstone
Well-Known Member
I used to be stationed at a place where i wanted to vape beforehand to help with stiffness and pain, but if I used normal temps it was a bit much for some interactions.
I believe I once stayed as low as about 166 C for the duration of my morning sesh with some decent visible vapor, and tried to keep the rest in the capsule for later but I sometimes forgot later on and just dumped that into the regular ABV by mistake, so I would recommend marking a tin or jar for this.
For me in that instance it was quite a fine line between not enough pain relief effects and too much other effects, but every situation is different. It was a fun experiment, and I thought afterwards that other strains might work well for this too.
In the end I cant remember if I went back to normal temps for that use case, or if it maybe helped me learn that it was better to abstain at certain times or try something else in that situation.
My advice to use less is to:
Only grind or prepare what your gonna use right then,
Make use of reclaim in a Volcano or edibles (and maybe even sometimes ABV if you can handle it!) at evenings/weekend,
Half or 3/4 fill your Mighty/Crafty bowls or capsules and fill the dead space with stainless wire mesh pad or similar.
Try to stay busy or do something and then reward yourself with vape breaks, at least I think that helps!
You're on the right track with the vape type as these are very efficient extractors, (and even more so if you use reclaim imo).
I did even consider daily portioning at some stages but never went that far.
Guess you might call that rationing!
I believe I once stayed as low as about 166 C for the duration of my morning sesh with some decent visible vapor, and tried to keep the rest in the capsule for later but I sometimes forgot later on and just dumped that into the regular ABV by mistake, so I would recommend marking a tin or jar for this.
For me in that instance it was quite a fine line between not enough pain relief effects and too much other effects, but every situation is different. It was a fun experiment, and I thought afterwards that other strains might work well for this too.
In the end I cant remember if I went back to normal temps for that use case, or if it maybe helped me learn that it was better to abstain at certain times or try something else in that situation.
My advice to use less is to:
Only grind or prepare what your gonna use right then,
Make use of reclaim in a Volcano or edibles (and maybe even sometimes ABV if you can handle it!) at evenings/weekend,
Half or 3/4 fill your Mighty/Crafty bowls or capsules and fill the dead space with stainless wire mesh pad or similar.
Try to stay busy or do something and then reward yourself with vape breaks, at least I think that helps!
You're on the right track with the vape type as these are very efficient extractors, (and even more so if you use reclaim imo).
I did even consider daily portioning at some stages but never went that far.
Guess you might call that rationing!
Hi guys,
I just ordered my first S&B device, a mighty plus
. I also picked up a few capsules.
I have a couple dynavap stem that with the mighty sometimes (a revolve and simrell MVS).
I also would like to use it through a water piece.
Would the Starry XMAX Water Pipe Adapter help me with fitting a dynavap stem? Or I need to buy the simrell adapter?
Thanks all.
I just ordered my first S&B device, a mighty plus
. I also picked up a few capsules.I have a couple dynavap stem that with the mighty sometimes (a revolve and simrell MVS).
I also would like to use it through a water piece.
Would the Starry XMAX Water Pipe Adapter help me with fitting a dynavap stem? Or I need to buy the simrell adapter?
Thanks all.
I've finished the vertical caddy which takes up a smaller footprint and no wasted space holding the dosing caps. I did add a spot to rest the cooling unit while you change over the load.I have finalized the Mighty Caddy. Added a few more features as well as some more storage options for the dosing capsules.
I designed some tubes that hold 7 caps each. The above shows 5 tubes for a total of 35 caps.
The tubes are the exact size of a 18650 battery so there are many existing options for tube storage. I made two containers to put the tubes into. One holds two and the other holds three. They are clipped onto the larger storage tubes on the Caddy.
I have also added a scoop to help with loading. It stows away in the handle.
The last thing I added was a little stick coming up and out the top of the ABV container to help empty the dosing caps.
I'm very happy with the results. However, what's funny is now I started using the Might without the dosing caps and find it better and easier to swap out the loads. So as usual, back to the drawing board to redo to meet the needs of using without doing caps.Likely a vertical caddy this time.
If anyone wants the STL files for the above Caddy, shoot me a PM and I'll be happy to share.
I'm happy with it and makes trucking the goods between rooms much easier.
Again, if anyone wants the STL files to print their own, just shoot me a PM.
my Starry WPA sits on the shelf because the rig works OK, but feels like a desktop and I’d rather be more mobile. For water, I like the Sidecar bubbler from Cream City Vapes [shipping takes a couple of weeks]. But VGoogiez has a bubbler that attaches to the CU rather than to the oven so I’m going to try that next. Most of the time I prefer dry. So I mostly used an 18mm glass adapter and a j-hook until I got the simrell adapter to use with my Revolve stem: best thing yet! No 3rd party adapter risking the tabs around the oven. No real risk of breaking glass [the glass part of the stem isn’t too vulnerable]. Only very smooth vapor. (This sounds like I’m on Simrell’s payroll but you can tell from my posts that this is the 1st time I’ve mentioned them :-)Hi guys,
I just ordered my first S&B device, a mighty plus
I have a couple dynavap stem that with the mighty sometimes (a revolve and simrell MVS).
I also would like to use it through a water piece.
Would the Starry XMAX Water Pipe Adapter help me with fitting a dynavap stem? Or I need to buy the simrell adapter?
Thanks all.
Petetbay
Well-Known Member
It works ok and can even use the 14mm wpa on the Mighty swivel mp, easy and cheap.
Rocks, expensive, but nice I use various DV glass stems. Have never been a fan of the swivel mp on any vape, but I don’t vape on the run much.
Very interesting. It will only outputs 3 amp max which is fine for charging but "might" not work for vaping while charging.
Vapetrees
Vaped Out
I have not tried that but you could microdose with the metal pad on top of the load. Keeps it less messy. Comes out in a puck
I alternate with my desktop Evo every other day. For the Mighty + I use .05 grams 3-4 times a day.
4-Aces King-High
Well-Known Member
Personally have been Reading / searching online and the general consensus is nothing new.
#1 improvement / wanted item seems to be Replacable batteries.
Finessseee
Well-Known Member
Two Quick questions, 1. is it safe to use an alternate third party charging cube? 2. If so, what’s the recommended wattage for the Mighty+ super charging capabilities? I have a few Anker cubes at home around 50-60Wats I believe. Wondering if it’s even worth buying the default super charger or just using my own rigged up one. Any thoughts on this?
4-Aces King-High
Well-Known Member
I personally cancelled my order for the 45 watt super-charger that charges 80% In 40-45 minutes.
afaik from Reading on the subject that it degrades the life of rechargeable-batteries by charging at a higher rate of Current. Storz & Bickel Factory-Battery -Replacement would be In line imb .( in my book)
I just charge my Mighty-Plus at the normal rate,1 or 2 amp charging . Supercharger is 45 Watts .
condition
Well-Known Member
Yes it is absolutely safe to charge the Mighty plus with an ancer. It is believed that faster charging may decrease the battery life sooner but not dramatically sooner i guess.
If you charger has USB-A output (the big computer USB port) AND you worry that faster charging may decrease sooner the battery, then you can use a USB-A to USB-C cable, which is slower charging.
Finessseee
Well-Known Member
Any USB-C PD 45W and over should be able to supercharge.
vapviking
Old & In the Way
Pose your question directly to S&B? They might at least offer you a discount on a swap for a new one...
Or, as the big trend on FC indicates, get a TinyMight2.
(disclosure, I don't have one...)