+1 (That's exactly what I do...and it works great.)
The Mighty/Mighty+ by Storz & Bickel
- Thread starter Roger D
- Start date
and what's on the bubbler end of your tubing?
startedflowermatingnimere
Member
as soon as i read this i thought right am going to go with your method simply so i can swing my expensive mighty around rapidly like a helicopter i mean isnt this all why we buy vaporizers?
lol just made me chuckle thanks
shredder
Well-Known Member
Yo, sup mighty army?
It's been a while since I last checked out this thread. It seems a different vibe and lots of complaints.
I just want to make a couple comments. My mighty is now one year old. And zero problems, serial number 78**. I don't vape oil and I use a screen on top, and have @rachett 's water adaptors. I started out using it about 6 bowls a day for several months, but now about 6_7 bowls a week, but I have four nice vapes.
For users that want flavor, start at lower temps, if you want instant clouds start at a higher temp. It really is that easy. And better herb = a better vaping experience, duh, lol.
I usually start at 350F and finish at 380F, but sometimes start at 380 and use water tools. Both ways work well. You will find your own style with use.
OK, carry on troops, lol. Have a mighty day.!
It's been a while since I last checked out this thread. It seems a different vibe and lots of complaints.
I just want to make a couple comments. My mighty is now one year old. And zero problems, serial number 78**. I don't vape oil and I use a screen on top, and have @rachett 's water adaptors. I started out using it about 6 bowls a day for several months, but now about 6_7 bowls a week, but I have four nice vapes.
For users that want flavor, start at lower temps, if you want instant clouds start at a higher temp. It really is that easy. And better herb = a better vaping experience, duh, lol.
I usually start at 350F and finish at 380F, but sometimes start at 380 and use water tools. Both ways work well. You will find your own style with use.
OK, carry on troops, lol. Have a mighty day.!
vapviking
Old & In the Way
I was using a tubing (5/16" o.d. food/water service quality) that inserted into the c/u directly, like ntaylor but without a locking mechanism (acrylic inserted/cut off). It was snug enough to be relatively airtight, but could pull out easily for reloading or putting away, etc.
I almost always use highest temp when using water tools. Then once I noticed a bad, bad taste, and could see very minor degradation of the end of the plastic tubing that's inside the c/u. That was enough to make me stop using that system.
Now, I have a whip from Arizer (ExtremeQ accessory, (5/16" i.d, 18mm glass male one end) that slips snug over the Mighty mouthpiece, like Slow Draw McGraw does (I actually use a Crafty c/u, had some around, and they're smaller so there's less loss to condensation).
So, I'm not opposed to using whips, tubing, some amounts of plastic or metals (nothing crazy, now!) but ONLY when those materials are not close to hot areas of the setup.
I hope one day soon to make a Muzzmod, which combines (by adhesives) an altered c/u with a glass male adapter, so Mighty can go directly onto glass. I think this would be the best of both worlds. No c/u= no place to lose material to condensation.
esoh
Well-Known Member
I clean my CU once I notice the draw resistance getting worse
usually like 30+ sessions
Mighty versus Crafty
Do you have both of these vaporizers?
Which do you prefer for walking around your home and yard only .... not interested in use at clubs, parks, camping, etc ... just at your favorite sitting spot at home and moving around the house.
Neither stealth nor odor suppression are of any concern, only ease and comfortableness of use are important to me in this choice.
I already have and love a Mighty, and think I should have a spare ... and am considering a Crafty. Thanks for your input.
Do you have both of these vaporizers?
Which do you prefer for walking around your home and yard only .... not interested in use at clubs, parks, camping, etc ... just at your favorite sitting spot at home and moving around the house.
Neither stealth nor odor suppression are of any concern, only ease and comfortableness of use are important to me in this choice.
I already have and love a Mighty, and think I should have a spare ... and am considering a Crafty. Thanks for your input.
Last edited:
hackslasher
Well-Known Member
Mighty don't have a crafty but mighty....
Justpassedu
Well-Known Member
Mighty is what you want , quicker heat up time & double the battery life.
Hot Dog Day 187
Well-Known Member
I'll repeat what i think i heard when i asked the same thing way back when.
Mighty has better battery (Almost twice as good if not actually that), much faster heat up time and you don't need anything bluetooth activated handy when you feel like changing temps. Up to you whether this is a pro or not, but I don't like the idea of my vape beaming out bluetooth signals. I've been hacking bluetooth since 1.0 and don't like the idea of soemone finding out I have a vape on me that awy!
Another non crafty owner but happy mighty owner. I do have friends who have tried other peoples craftys and said the vapor quality seemed to be no different at all.
Alan Partridge
Smell my cheese
I went down that road, are you thinking hey they're both the same really, but Crafty will be a more pleasing tactile experience because it's smaller, I don't take it out and I don't mind charging it all the time, I'll eventually use it more than the Mighty? Cos I thought that but the Crafty ended up annoying me, because of the short battery life span and looooong recharge times. And it overheated and cut out all the time. So my Crafty is long gone. I would say if you have a VAS itch, and especially since you're coming from the Mighty- get something else.
thanks @grokit ... in what areas do you think that the Crafty is stronger than the Mighty besides its smaller size and lower cost?
Jurkone
Well-Known Member
¿And what about using the magic flight bong adapter + a small silicone tube for connecting it to the mouthpiece?
I mean, a small tube with a slightly higher diameter than the silicone tube of the MFBA and the Mighty mouthpiece, so you can insert both inside him.
I mean, a small tube with a slightly higher diameter than the silicone tube of the MFBA and the Mighty mouthpiece, so you can insert both inside him.
I think that combining everything with the Easy Flow Budgie coud be a nice and portable idea for hidrating the vapor without carring big glass pieces?
grokit
well-worn member
I wanted to give this a bit of thought, as most of the differences are pretty obvious and really just that, differences no more no less. Neither seems better, but variety is the spice of life. Bluetooth is a nice difference if you like playing with smartphone apps etc. I also like the fact that the crafty stands up straight on its own, and is stealthier. The mighty has better battery life and heat-up time, overall they seem pretty complimentary. What they have in common is they are both session vapes, and both hit like a truck.
Last edited:
Governmentchz
Member
Hey gang! I wanted to drop in and mention a few words about the Mighty. I don't have the most, but Ive tried enough various vapes to make an educated statement at least.
First, I'm a big fan of Arizer. I love the EQ and Solo and I've actually purchased 4 EQ's for family members over the last few years and after passing along my Pax (original model...I was unimpressed), I picked up a second Solo...just in case.
Well, after such a long financially lean period, I stumbled into some disposable income and decided to treat myself to a new vape. I got the Mighty and ffs, I love it! I've only used it in and around the house/yard so far, but thanks to its improved convenience (compared to the solo) and fantastic performance, I haven't turned on the EQ in 3 days. Maybe when the honeymoon is over, but for now...it's the Mighty FTW!!
First, I'm a big fan of Arizer. I love the EQ and Solo and I've actually purchased 4 EQ's for family members over the last few years and after passing along my Pax (original model...I was unimpressed), I picked up a second Solo...just in case.
Well, after such a long financially lean period, I stumbled into some disposable income and decided to treat myself to a new vape. I got the Mighty and ffs, I love it! I've only used it in and around the house/yard so far, but thanks to its improved convenience (compared to the solo) and fantastic performance, I haven't turned on the EQ in 3 days. Maybe when the honeymoon is over, but for now...it's the Mighty FTW!!
Nube Scrutator
Cloud Searcher...
W9's Nibbler X, an EO cart mp (trimmed) and the Mighty:
Stinky
Well-Known Member
For anyone wondering about the stand pictured above it is an Apple TV stand:
http://www.amazon.com/Newer-Technology-NuStand-Alloy-Display/dp/B005PP4ECK
http://www.amazon.com/Newer-Technology-NuStand-Alloy-Display/dp/B005PP4ECK
Jurkone
Well-Known Member
¿And what about using the magic flight bong adapter + a small silicone tube for connecting it to the mouthpiece?
I mean, a small tube with a slightly higher diameter than the silicone tube of the MFBA and the Mighty mouthpiece, so you can insert both inside him.
I think that combining everything with the Easy Flow Budgie coud be a nice and portable idea for hidrating the vapor without carring big glass pieces?
¿What do you think?
