The Mighty/Mighty+ by Storz & Bickel
- Thread starter Roger D
- Start date
WakeAndVape
VapeLife X
Bring yours to work...i do! The mighty loves outings
I have owned my Mighty since Oct 2014. I have never been more in love with a vape in my life. It meets all my needs and has never left me hanging. That being said......sometimes when I turn it on, the screen is so dim that I have to move the unit around until I find enough light to read it. At least once during every session, the device will not vibrate when it reaches a new set temperature but I have never gotten an Err o04 message. I know that my unit needs to be tweaked, updated or replaced completely but I do not want to part with it long enough for that to happen.
biohacker
H.R.E.A.M
What's the best way to use shatter in the mighty? Place pad in empty bowl, put small piece on pad then attach CU? Temps?
Only tried once, just a piece mixed in with flower, and have no idea what happened. Assumed it vaped up okay but Thinking about being a purist and going shatter only. Always fear it ruining the heater.
Only tried once, just a piece mixed in with flower, and have no idea what happened. Assumed it vaped up okay but Thinking about being a purist and going shatter only. Always fear it ruining the heater.
Mrmrmrmr
Well-Known Member
Bio,with any concentrate I first smush(smash?) it into the pad then I place the pa in the mighty and start heating up to at least 205c. 210c preferably for concentrates alone. That's it! Nothing is really complicated with the mighty 
Speaking of the SS pad...I walked into my room the other say to see my collie had the pad in her mouth. Luckily I rescued it before any harm fell !a quick ISO rinse and everything was A-oK.
The mighty is loving the most recent bud I got. The vapor being produced is simply insane. It just pours out of mighty into my lungs
Brought it over to my friends who still smokes. He has a LSV but it's safe to say it doesn't get used much. And he doesn't know how to use it properly even after the countless times I've instructed him on how to use it. So I pulled out the mighty and he's like oh another vape
After his first pull he was astonished. Even more so that it was a portable and not a plug in. This is the first time this has happened with him. And I've brought many vapes over there. Cloud,LSV,ssv,hammer,MV.
None but the mighty peaked his interest! He's still a smoker though no matter how hard I try (given up at this point) to convert him. His loss I guess !
Speaking of the SS pad...I walked into my room the other say to see my collie had the pad in her mouth. Luckily I rescued it before any harm fell !a quick ISO rinse and everything was A-oK.
The mighty is loving the most recent bud I got. The vapor being produced is simply insane. It just pours out of mighty into my lungs
Brought it over to my friends who still smokes. He has a LSV but it's safe to say it doesn't get used much. And he doesn't know how to use it properly even after the countless times I've instructed him on how to use it. So I pulled out the mighty and he's like oh another vape
After his first pull he was astonished. Even more so that it was a portable and not a plug in. This is the first time this has happened with him. And I've brought many vapes over there. Cloud,LSV,ssv,hammer,MV.
None but the mighty peaked his interest! He's still a smoker though no matter how hard I try (given up at this point) to convert him. His loss I guess !
biohacker
H.R.E.A.M
Having just sold my LSV, and owned a cloud and SSV, I think the mighty blows them away!
T minus 1hr until I try straight shatter on the pad!
I've seen vapour pump out the intake hole when used inverted, and the momentum of my draw and cause vapour to creep out the mouthpiece. Non issue for me personally although I do sometimes wonder about cleaning the air path. I'm OCD with cleanliness.
T minus 1hr until I try straight shatter on the pad!
I've seen vapour pump out the intake hole when used inverted, and the momentum of my draw and cause vapour to creep out the mouthpiece. Non issue for me personally although I do sometimes wonder about cleaning the air path. I'm OCD with cleanliness.
I.b.vaping
Well-Known Member
JJ Cool F
Well-Known Member
Mine 'dribbles' out of the mouthpiece a little after a long draw. Nothing out of the sides, bowl, or anywhere else, and not a significant amount out of the mouthpiece.
Massey64
Well-Known Member
Hey guys, first post here. So generic hope it's in the right place/I searched pretty hard for an answer but couldn't seem to find one 
Ive had my MFLB for almost a year now and decided that it's time to upgrade and cut out combustion as much as possible. Having read to page 80 I'm almost certain the Mighty is the one for me! Looking to purchase it on Friday when I get paid (the money seems to go in and straight out again
)
Due to living in halls at uni I don't have a proper postage address at the moment so I'm curious as to how regularly the mighty needs new parts. Obviously there are many variables, (I'd say roughly I vape or smoke about 2 or 3g a week) but it'd be great if you guys could give me a feel for what to expect ws a result.
I was thinking;
2x O-ring pack
1x Wear and tear set
2x Packs of screens
Should last a four or five months?
Thanks for all the advice this forums and its members have shared with me already and I look forward to learning more!
Ive had my MFLB for almost a year now and decided that it's time to upgrade and cut out combustion as much as possible. Having read to page 80 I'm almost certain the Mighty is the one for me! Looking to purchase it on Friday when I get paid (the money seems to go in and straight out again
) Due to living in halls at uni I don't have a proper postage address at the moment so I'm curious as to how regularly the mighty needs new parts. Obviously there are many variables, (I'd say roughly I vape or smoke about 2 or 3g a week) but it'd be great if you guys could give me a feel for what to expect ws a result.
I was thinking;
2x O-ring pack
1x Wear and tear set
2x Packs of screens
Should last a four or five months?
Thanks for all the advice this forums and its members have shared with me already and I look forward to learning more!
fatbiker
Well-Known Member
Hey guys, first post here. So generic hope it's in the right place/I searched pretty hard for an answer but couldn't seem to find one
Ive had my MFLB for almost a year now and decided that it's time to upgrade and cut out combustion as much as possible. Having read to page 80 I'm almost certain the Mighty is the one for me! Looking to purchase it on Friday when I get paid (the money seems to go in and straight out again
Due to living in halls at uni I don't have a proper postage address at the moment so I'm curious as to how regularly the mighty needs new parts. Obviously there are many variables, (I'd say roughly I vape or smoke about 2 or 3g a week) but it'd be great if you guys could give me a feel for what to expect ws a result.
I was thinking;
2x O-ring pack
1x Wear and tear set
2x Packs of screens
Should last a four or five months?
Thanks for all the advice this forums and its members have shared with me already and I look forward to learning more!
I have had my Mighty for about a week now and absolutely love it. The best vape I have ever used. I was thinking of getting some replacement parts just in case. I was looking at the "Wear and Tear" kit; however, it doesn't come with the replacement seals? What is that all about?? The seals which probably need to be replaced and are most important to the function of the vape and they don't include it in the "wear and Tear" kit? Dumb in my opinion.
I am going to order the "wear and Tear" kit along with a O-Ring replacement kit.
For those of you who have purchased parts for your Mighty, where di you buy them from? I am looking and can only find them directly through S&B. I think that is the route I am going to go.
Last edited:
shredder
Well-Known Member
Hey guys, first post here. So generic hope it's in the right place/I searched pretty hard for an answer but couldn't seem to find one
Ive had my MFLB for almost a year now and decided that it's time to upgrade and cut out combustion as much as possible. Having read to page 80 I'm almost certain the Mighty is the one for me! Looking to purchase it on Friday when I get paid (the money seems to go in and straight out again
Due to living in halls at uni I don't have a proper postage address at the moment so I'm curious as to how regularly the mighty needs new parts. Obviously there are many variables, (I'd say roughly I vape or smoke about 2 or 3g a week) but it'd be great if you guys could give me a feel for what to expect ws a result.
I was thinking;
2x O-ring pack
1x Wear and tear set
2x Packs of screens
Should last a four or five months?
Thanks for all the advice this forums and its members have shared with me already and I look forward to learning more!
I'd get the wear and tear kit and screens, the kit has o rings, extra mouth pieces and an extra cooling unit. I've never really heard much about having to change o rings. Most of us have not had to get anything or send their unit in for repairs. But if that happens S&B has been good to work with. Good luck
hey i was just wondering if you could time how long it takes before the first initial battery drops. mine clocked in at 17 minutes from vaping at 345~355 to 400~410. approximately two sessions.
would like to hear how your unit holds up in comparsion to mine. that way i'll know wether to send mine in for service or not.
fatbiker
Well-Known Member
The Mighty plugged in is a great desktop! Try it and buy a few extra chargers if you need. Heats up Way faster than my Volcano does.
Mine is the same. Roughly 2-3 sessions on first battery bar. However, the last battery bar took me forever to drain the last charge cycle.
To save my battery I am going to plug it in while I am vaping inside. I am not going to leave it plugged in just while in use.
Last edited by a moderator:
thank you!!!
biohacker
H.R.E.A.M
Had some great shatter sessions last night! Only hiccup I found was that when I removed the pad, there was a small thin ring of shatter around the metal ring of the bowl. A quick qtip swab wipe and it was clean as a whistle, but that small amount ended up in the trash. Or was it residue? Maybe I used way too much shatter? I'm amazed at how many clouds I was pumping out...seemed like it would never end! How does it do it? The shatter melts and really gets trapped up in that pad? I would have figured on max temp that it would just flow through it.
Another phenomenon that i'd like to share is that even though both Mighty's are brand new, with fairly light use so far, I had one that had less charge than the other, by maybe a bar.....BUT the Mighty with LESS charge, charged up FASTER than the Mighty with more charge. How does that happen?
Another phenomenon that i'd like to share is that even though both Mighty's are brand new, with fairly light use so far, I had one that had less charge than the other, by maybe a bar.....BUT the Mighty with LESS charge, charged up FASTER than the Mighty with more charge. How does that happen?
JJ Cool F
Well-Known Member
Hey guys, first post here. So generic hope it's in the right place/I searched pretty hard for an answer but couldn't seem to find one
Ive had my MFLB for almost a year now and decided that it's time to upgrade and cut out combustion as much as possible. Having read to page 80 I'm almost certain the Mighty is the one for me! Looking to purchase it on Friday when I get paid (the money seems to go in and straight out again
Due to living in halls at uni I don't have a proper postage address at the moment so I'm curious as to how regularly the mighty needs new parts. Obviously there are many variables, (I'd say roughly I vape or smoke about 2 or 3g a week) but it'd be great if you guys could give me a feel for what to expect ws a result.
I was thinking;
2x O-ring pack
1x Wear and tear set
2x Packs of screens
Should last a four or five months?
Thanks for all the advice this forums and its members have shared with me already and I look forward to learning more!
I would add a bottle of Isopropyl alcohol to your list - you'll need it to clean the Mighty every couple weeks.
The MFLB and the Mighty are apples and oranges. You'll be blown away by the difference, imo. Welcome!
WakeAndVape
VapeLife X
I've had my mighty for what feels like 2 or 3 months and I haven't had to use ANY spare parts yet, so I believe you should be fine, cleaning is key, if you want to keep the bowl pretty iso swab daily when slightly warm...i didn't and my bowl looks stained. my girl does with the cradry and it looks semi newShould last a four or five months?
Thanks for all the advice this forums and its members have shared with me already and I look forward to learning more!
adam_baumm
Well-Known Member
I don't eat meat, So its tofurky in my eyes 
Ascent and most probably mflb would be spam to me.
Ascent and most probably mflb would be spam to me.
Last edited: