The HighLighter (Glass-Core Open-Source Halogen Log) Kit Hosted by REFC Labs
- Thread starter RedEyeFlightControl
- Start date
Improvaper
Well-Known Member
I have. It works if you have a compatible stem or WPA. The included stem is a bit too large, and you can't really form those ELBs at all.
thunderstealer1337
Well-Known Member
Trww has handles up again, I just got one
masonjars
Well-Known Member
Once I got a jhook I haven’t felt the need to use the direct draw stem. It’s still a similar experience IMO, just a littler cooler and a little less blinding. Now I kind of want a super heady hand piece.
Once I got a jhook I haven’t felt the need to use the direct draw stem. It’s still a similar experience IMO, just a littler cooler and a little less blinding. Now I kind of want a super heady hand piece.
That definitely looks dope! But not quite for me, I seem to be one of the few that love the Bob Barker loooooong microphone type vapes!
I stock the LSV wand (both long and shorties) for this reason. I'm a big fan of direct-draw as well! They're a nice upgrade from the stock wand/tool and cool a lot better. I have the honeycomb version on my DD, and love-love-love it.
badbee
Well-Known Member
There's a honeycomb version? I thought I read all the posts on this thread. What the hell is a honeycomb version?
Direct draw must be pretty hot on the throat. How would you compare heat level to a direct VC hit?
3migo
Is this a...what day is this?
Yep! Elev8 still sells them directly: https://www.elev8glassgallery.com/honeycomb-lsv-transfer-wand/There's a honeycomb version? I thought I read all the posts on this thread. What the hell is a honeycomb version?
Direct draw must be pretty hot on the throat. How would you compare heat level to a direct VC hit?
Yes sir!There's a honeycomb version? I thought I read all the posts on this thread. What the hell is a honeycomb version?
Direct draw must be pretty hot on the throat. How would you compare heat level to a direct VC hit?
The HighLighter (Glass-Core Open-Source Halogen Log) Kit Hosted by REFC Labs
I messaged him through his website, still no reply. @Ernielicous are you saying instead of the beads that came with the kit, you used ruby instead? And you wrapped the whole HighLighter in foil? (of course leaving the ends open)
fuckcombustion.com
They're Elev8 and made for the LSV, but pair very nicely with the HLT just the same!
Shorties are better than the stock wand/tool. Longs are better than shorts, and the honeycomb is the best, all for obvious heat dissipation reasons. They have more mass than the wand/tool which helps a lot.
badbee
Well-Known Member
OK, for some reason I was imagining a honey comb retainer in the HLT main stem, which of course makes no sense at all.
That's a lovely piece of glass and seems like a better price for what you get than most cooling stems.
Sorry, I did zero research on this and I'm sure it's easy enough to find, but what's the length of the cord on both the LSV and the Highlighter?
oldfool
Well-Known Member
Since you supply the power supply, it varies?
This is what most use. With a lab power supply you can make it any length.
The LSV cord is about 10 feet or so. The HLT has a few inches of pigtail so the cord is whatever you attach to it. These little VVPS have 3ish feet of cord. I use a 6' 5.5x2.1mm M-F extension cord on all of my cores for extra play.
4everpushingaboulder
Well-Known Member
New Ed’s TNT 19/14 Thuya Burl. Tried the stem pack instead of the basket and still need to crank up the temp a bit more but not bad for a first attempt. @Ed's TnT
Sound on!
Sound on!
thunderstealer1337
Well-Known Member
I got 4' or 6' extenders as well, but this plugs into the pigtail of the higlighter and not the ac/dc power cord side.
When doing so, the same voltage did not give me the same extraction, I felt like the longer cord robbed amps during the draw, like it couldnt supply enough amperage/current/voltage to keep the light from cooling off during the draw.
For example that longer cord was not giving me any more vapor on the same voltage setting, removing the longer cord attachment and same voltage setting I was able to get that final extraction.
oldfool
Well-Known Member
You're right.
I just got an extension and my voltage went from 5.5V to 5.8V to get the same hit.
androponic
vaped.
Heads up! Drop tonight at 9pm est.
20 kits are available according to the newsletter.
20 kits are available according to the newsletter.
badbee
Well-Known Member
There is always some voltage drop in a wire, your extension would benefit from a heavier gauge. It won't do any harm, so long as the extension isn't too warm there is no danger and the Highlighter bulb doesn't care. If it's dropping 0.3 V at around 3 A that's 0.9 W of energy, probably not enough to even feel warm.
CrazyDiamond
HAL is a StarChild
The further away from the source, the more voltage loss...think of it like plumbing, the further away from the pump, the less pressure.
Improvaper
Well-Known Member
No more mason jar jank for me. Now it's pure pepper mill jank! 
Haha, yeah, I messed up the DC port a bit. But still a big and easy upgrade for $5 (it was a 2-pack on sale when I purchased). Took me 10 minutes to make it work.
Haha, yeah, I messed up the DC port a bit. But still a big and easy upgrade for $5 (it was a 2-pack on sale when I purchased). Took me 10 minutes to make it work.
Watch Would you like some fresh-ground Highlighter? Say when... | Streamable
Watch "Would you like some fresh-ground Highlighter? Say when..." on Streamable.
streamable.com
Watch Pepper Grinder Highlighter demo | Streamable
Watch "Pepper Grinder Highlighter demo" on Streamable.
streamable.com