GreenHopper
20 going on 60
Yeh that's normal, heater turning on and off rapidly to maintain the temp.
Discontinued The Grasshopper
- Thread starter midgetsanchez
- Start date
Yeh that's normal, heater turning on and off rapidly to maintain the temp.
GreenHopper
20 going on 60
Ah 
Thanks @VegNVape , it's Sunday, day of rest for my brain
@Copacetic
It's in the mail, keep checking
Thanks @VegNVape , it's Sunday, day of rest for my brain
@Copacetic
It's in the mail, keep checking
Eleaf420
Well-Known Member
I have been vaping e cigs for almost four years. I have many mods and almost every manufacturer of mods recommend charging your batteries in a external charger. Most chargers have great safety features built in. Any high drain battery can vent. It's going to happen to a very small percentage of them but it will happen. But by charging your batteries in a external charger you won't have to worry about destroying your hopper.
Copacetic
Somewhere North of The Wall
Sorry I'm not quite following your post
Ah
Thanks @VegNVape , it's Sunday, day of rest for my brain
@Copacetic
It's in the mail, keep checking
NO NO, leap year........ Feb' 29th only comes around about every 4 years.
So you might have the hopper in time for his next birthday.
I'll get my coat.....
GreenHopper
20 going on 60
it seems so obvious now 
zymos
Well-Known Member
What is it that you want to happen?
If you just want your money back, simply mail HL and they'll give you a refund.
GreenHopper
20 going on 60
Yep, I'm gonna do the same. I think I'm going to go for:
Nitecore UM20 Digicharger For AA 18650 18500 14500 18350 18700 LCD Screen (D2 D4 I2 I4 UM10)
https://www.amazon.co.uk/dp/B00PDNKMJS/ref=cm_sw_r_other_awd_D8d3wb7BP4M3R
Pair it with a Mu Plug (as I already have one:
http://www.themu.co.uk/pages/mu-system
Eleaf420
Well-Known Member
I have a nite core and a Efest Luc 4. With the Luc 4 you can see exactly how much charge is in the battery and you can adjust between .5 & 1.0 amp recharge to speed up the charge. It will charge your battery to 4.2 volts and stop. It will not overcharge your batteries. This way you don't have to babysit your batteries. I haven't used the hopper charger once. It's still sitting in the box. I have three batteries that I just rotate out of my 4 bay charger.
http://www.lightningvapes.com/products/efest-luc-v4-lcd-usb-charger
Last edited:
GreenHopper
20 going on 60
Eleaf420
Well-Known Member
It's the only way to go in my opinion. Also the Luc 4 has a USB port on the back so you can charge your phone or any usb charging device.
Bass Vaper
Well-Known Member
Bad body is what they told me. My new body gets here tomorrow. When you say you took it apart, what all did that entail? Sweet you got it working again. Mine's been down about a week or so.
I do love going back to my Pro and Alfa tho.
GreenHopper
20 going on 60
I think as the body carries the electric charge it's important to:
A) keep the threads clean
And
B) ensure the components are screwed together tightly (not too tight though, you don't want to break the threads)
GreenHopper
20 going on 60
I did see that feature. I want to do the setup in reverse though and have the Mu plug as the wall wort (due to its flat pack slim design) and then charge my phone/GH batteries off of that. Also by going with the UM I can use a solar charger for the backpacking sessions.
But I do like the look of the LUC though. Ahhhh decisions!
HealingOfTheNations
Member
Has anyone tried the suction method to fill the bowl. Just like the iolite wispr2?
Eleaf420
Well-Known Member
No more hot lips.
b0
Cloudy...
I found a short steam in my house and totally loving it bro! Wish I can order more short one just in case...
Offtopic: Nice avatar, "I'm not surprised motherfucker" loved the fight and how he won!!
FluffMolotov
Well-Known Member
If anyone is interested in a charger that can be powered from USB output and at the same time function as a respectable (1A out) mini power bank there's this lil guy: http://www.gearbest.com/chargers/pp_272183.html
Safe and well made. Flash-light afficianados love them.
Safe and well made. Flash-light afficianados love them.
SlinginPaint
As Above ∞ So Below
So I just made a delightful discovery... My Joe Copeland micro Klein mates perfectly with the GH silicone MP.
Here's a video of a pinch of Nameless OG at 3.5 then at 4.
Here's a video of a pinch of Nameless OG at 3.5 then at 4.
McQuack
Well-Known Member
I'm planning to use Aromed mouthpieces. They should fit and are cheap: 10 mouthpieces for 8$
Vapetrees
Vaped Out
Nice video. I couldn't help but notice that it seems as if you are drawing really hard on that bubbler. I have found, with my GH, that it milks my bubbler more if I don't draw on it too hard. Maybe it just seems like you're drawing really hard because of the size of your Klein. Have you tried drawing on it at a slower pace?
SlinginPaint
As Above ∞ So Below
I did try that in a couple of test runs, but for some reason the vapor output was not that great.
I'll give it another go with another strain and draw slower.
You do generally have to draw harder on Kleins to get the diffusion you want.
What you will not see in smaller pieces like this, is the "milk" factor because the volume of the piece is so small, there's not much area for it to build up and "milk" as you would say.
I'll give it another go with another strain and draw slower.
You do generally have to draw harder on Kleins to get the diffusion you want.
What you will not see in smaller pieces like this, is the "milk" factor because the volume of the piece is so small, there's not much area for it to build up and "milk" as you would say.
Last edited: