The ELEV8R from Elev8 Vehicles
- Thread starter 7thFloorVapes
- Start date
angular ocelot
Well-Known Member
after vaping a bowl and while the bowl is still warm, i remove the screen and give it a brush, them give the inside of the bowl a wipe with tissue paper and poke a toothpick throught the holes in the glass screen. takes seconds. once a week ish i give everything a good clean in iso in an ultrasonic cleaner.
arb
Semi shaved ape
That and one has balls and the other does not?
arb
Semi shaved ape
That would be the one without.
Also 7thfloors has a knob that screws it into the coil.
Md_Hybrid
Stuck under a 🪵
Upgrade kit https://www.elev8glassgallery.com/elev8r-e-heater-rig-kit-e-nail-upgrade-for-g9-pid-only/
Full kit
ELEV8R Enail Vaporizer Full Kit
The Elev8r dry herb vape with a heater and PID to control your heat electronically
www.elev8glassgallery.com
The 99$ kit is cheap, it's an excellent bargain. But the second kit's PID Controller can be found for 50$ in China. So, Elve8's PID C seems quite expensive. But it's nicely branded.Upgrade kit https://www.elev8glassgallery.com/elev8r-e-heater-rig-kit-e-nail-upgrade-for-g9-pid-only/
Full kit
ELEV8R Enail Vaporizer Full Kit
The Elev8r dry herb vape with a heater and PID to control your heat electronically
Last edited:
I'm with 7th floor on not adding any boro or ruby's to the heater for torching. I don't recommend it at all but people still buy the stuff and do it on their own.
However I feel comfortable recommending them with a coil as the heating and cooling is more regulated to avoid the issues you get with a torch. I also find them necessary to meet the full potential of the kit. I used to sell this without them. It works but you won't have enough mass in the heater to get rich extraction in one or two hits that you get when they are there. You can also run the controller at a considerably lower temperature which is safer.
However I feel comfortable recommending them with a coil as the heating and cooling is more regulated to avoid the issues you get with a torch. I also find them necessary to meet the full potential of the kit. I used to sell this without them. It works but you won't have enough mass in the heater to get rich extraction in one or two hits that you get when they are there. You can also run the controller at a considerably lower temperature which is safer.
Md_Hybrid
Stuck under a 🪵
The full kit is definitely a little pricey. My buddy recently bought two G9 mini enail kits from some place for I believe approx $80/piece, and each kit came with a pid, heating coil, banger, & carb cap.
Spike11552
Well-Known Member
Hey guys! I just recently purchased an elev8r with a torch for 420. I love it but soon after had the regret of not buying a 710 coil set up. I see Elev8r has a bundle for $199 but it has an elev8r included that I don’t need. I contacted customer support and they told me I couldn’t refund the one I purchased and I couldn’t buy the bundle price without the Elev8r but they have me a 20% off promo that knocks it down to 159$. After doing some looking around I spotted a 710 16mm coil set up on the dabbing specialist (60$ cheaper) but my question is....is this deal worth it? Should I just buy it directly from Elev8r with this 20% off deal and suck it up? Is there another website with a kickass deal and better set up?
Also I think I know the answer to this but better to be safe than sorry...are there 2 different styles elev8r’s one for a torch and one for a 710 coil? Or it’s universal and the one I bought for 60$ can be used with a torch or 710 coil (I know there’s a difference in glass screen or standard screen filters) I’m thinking it’s universal (the quartz glass I’m talking about)
Thanks for the help/support!
Also I think I know the answer to this but better to be safe than sorry...are there 2 different styles elev8r’s one for a torch and one for a 710 coil? Or it’s universal and the one I bought for 60$ can be used with a torch or 710 coil (I know there’s a difference in glass screen or standard screen filters) I’m thinking it’s universal (the quartz glass I’m talking about)
Thanks for the help/support!
Last edited:
goatgobaahh
Well-Known Member
Do we need the downstem? That's the only thing stopping me from buying this. I just need the bowl and the. part to torch already all set with my own glassware. Most of it doesn't accommodate downstems.
You'll find the same PID controller for far less money on Aliexpress or DHgate (or Elsewhere). Eventually, you can take the Elev8's one for supporting them. It may depend of your MAGA level and your cheapness... I'm french, shipping cost to europe from elv8 are huge , so i took mine from China (60$). But if i was american, i could be MAGA. But i'm cheap. I don't know. (mind that in France too, Qannon followers are tracked... global village)
You'll need a 16 mm coil, wich you'll have to slightly modify.
The quartz heater you have is okay for torch and coil. There's only one model, now.
Spike11552
Well-Known Member
Aside from shipping costs(I’m American) so with 20% off I would be 159$ for an additional Elev8r (that I don’t need I guess I could sell or keep as a spare) the 710 coil and the POD controller. If I have to spend a few extra dollars for quality I would have have quality but I was wondering if anyone knew of similar quality or better for a better price? I know it’s asking for a bit but everyone here is so knowledgeable I figured it wouldn’t hurt asking. I’m tempted to just buy the one from Elev8r so I don’t have to worry about tampering with the coil but if it’s easy enough and cheaper else where with the same quality I can manipulate the coils.
androponic
vaped.
you can get it without, they call it the “rig kit”
I broke my first heater 15 days after I received it. Such a dark day. Shit happens.
So, a spare heater could be a good idea.
(the Vgoodiez Pid controller which is in his kit seems better than mine and the Elev8's one. There's a lot of option)
mixchu69
Well-Known Member
I had 2 boro heaters and both cracked in a week. Having a backup is nice. But quartz heaters are more durable.
BestBuds
The Dude
I quote this post because it's the road I followed when I shaped my own coil. It's a cheap option if you already have a Elev8r but want to go electric. Credit where credit is due.Dude, I went with the cheapest coil and enail I could find because I just wanted to see if it was something I'd enjoy using. I picked up both from the dabbing warehouse. It seems like they have a deal going on constantly, so $79 for the mini nail that comes with a 16mm coil, then take 20% off. I think shipped to my door it was like $74 or so.
https://dabbingwarehouse.com/collections/enails-accessories/products/portable-mini-enail
Or you can buy a spare heater for the coil and keep the torch option as a back up for when the power goes out.
delicatebunting
Well-Known Member
Upgrade kit https://www.elev8glassgallery.com/elev8r-e-heater-rig-kit-e-nail-upgrade-for-g9-pid-only/
Full kit
ELEV8R Enail Vaporizer Full Kit
The Elev8r dry herb vape with a heater and PID to control your heat electronically
Does anyone know the XLR pinouts? Does it match Auber/DC/Peli?
Cannabis Hardware Blog- About Enail Pinouts, Connections and Compatibility
There is no
Spike11552
Well-Known Member
This is a complete Newb question so excuse my ignorance before it even comes out of my mouth but what is the difference In cheaper pid like the one for 99$ from dabbing specialist or the middle range prices one from Elev8r or the highest priced high end one from vgoodiez? I asked someone else on Reddit where he would recommend that I get a pid and 710 coil and he also said the one from vgoodiez but is the proformance going to be THAT significant? I mainly just smoke flower, I haven’t had concentrates In years but maybe on occasion I will now that I have a device that will work well with them. Is it just that it’s got brute power/build to last? Or different features? You don’t have to get crazy detailed with me just a quick Newb to 710 coil’s explanation will due just fine.
Trackrat
Well-Known Member
I bought mine off Amazon for 90 $. Kikstar, ame120. Shaped the coil myself. Had it for six months and still works great. Just remember, it's a heat source and you're looking for the perfect temp/flavor for you. So, yes it will get hot for your tastes. Mine is set at 475°.