Tetra P80

[VapeApe888]

This particular drop of duals took 10 minutes. Almost double a normal drop time. If someone really wanted a dual then they had a much better shot than usual (perhaps due to US election day - or the fact that it was midweek - or the fact that duals are +$ over p80s).

Blame the game, not the player. Then again... the game isn't changing anytime soon

If your internet is so bad that you can't make the drops on time, perhaps go to a library or friends house if you can? I don't know your exact situation but hopefully SOMEONE has decent internet.

I think we were particularly talking about P80s not duals. And while yes without a doubt the problem is in the game, what Oden pointed out is correct, selfish users buying several units definitely make it worse for everybody else, that's a fact. You make it sound as easy as just going to the library or a friends house but it ain't, everybody's case is different and each one has it's own personal difficulties and arrangements to make for each drop, I guess it's easier to talk from your perspective.

 

[Shogun.]

This particular drop of duals took 10 minutes. Almost double a normal drop time. If someone really wanted a dual then they had a much better shot than usual (perhaps due to US election day - or the fact that it was midweek - or the fact that duals are +$ over p80s).

Blame the game, not the player. Then again... the game isn't changing anytime soon

If your internet is so bad that you can't make the drops on time, perhaps go to a library or friends house if you can? I don't know your exact situation but hopefully SOMEONE has decent internet...

Sweet I got it done in like 3 minutes so I finally have a tetra coming in

This was my 3rd drop attempt (like 3.5 since the friday drop didn't work for the duals) and honestly I've tried to find more readily available vapes between those drops to repleace my want for one but couldn't. if you wanted it as much as I did you'll keep coming back to attempt and its still worth it to me

 

[Ghree-hee-heeezy]

I dunno why everyones getting so butthurt..
Its been stated mutiple times how to go about signing up and purchasing at the time of the drop, i realise that some people may have shit internet or be at work but thats nothing on lamart. I grabbed a custom p80 (first time trying) on the drop before last, in the middle of a 12 hour shift working in a warehouse that doesnt allow me to have my phone on me when working. Still managed to set an alarm and go out on a break for 10 minutes and grab a slot had to give authorisation with codes for my bank aswell cause i messed up and chose the wrong payment type, the sweats were real haha but it wasnt hard. I followed very simple instructions and planned ahead. Anyone complaining has no real reason to be salty. Sure if you really wanted that prebuild i guess that sucks but you guys realise that you can have a custom be made to the same specs as the pre mades and the cost will be the same 235 right.. Lay off the guy, waitlists are lame. Who would want a vape to rock up in 2 years when who knows what could happened in the meantime,

 

[VapeApe888]

i own a p80 and it is the best portable vape i have and i will be buying another one for back up if i can.

if that upsets people then that's not my problem.

if you dont like the way the the system is set up to purchase one then dont buy it plain and simple.
how many times do people have to complain about the same thing over and over.

life is not fair get over it.

You can fill your house with P80s if you want to, you have your right to do so.
But anybody who needs to complaint is in there right to do so as many times as they want to.

You are complaining about people who complaint, absurd.

 

[Shogun.]

I dunno why everyones getting so butthurt..
Its been stated mutiple times how to go about signing up and purchasing at the time of the drop, i realise that some people may have shit internet or be at work but thats nothing on lamart. I grabbed a custom p80 (first time trying) on the drop before last, in the middle of a 12 hour shift working in a warehouse that doesnt allow me to have my phone on me when working. Still managed to set an alarm and go out on a break for 10 minutes and grab a slot had to give authorisation with codes for my bank aswell cause i messed up and chose the wrong payment type, the sweats were real haha but it wasnt hard. I followed very simple instructions and planned ahead. Anyone complaining has no real reason to be salty. Sure if you really wanted that prebuild i guess that sucks but you guys realise that you can have a custom be made to the same specs as the pre mades and the cost will be the same 235 right.. Lay off the guy, waitlists are lame. Who would want a vape to rock up in 2 years when who knows what could happened in the meantime,

Exactly, my first 2 failed attempts were my own fault with card issues, was really annoyed but this time got it sorted out.
I also work at a warehouse and was staring at the clock before the drop, and sure enough got it this time cause I went to the bathroom right on the moment in dropped
the drop system actually made me incredibly relieved that I got one

 

[Weedaholic]

You can fill your house with P80s if you want to, you have your right to do so.
But anybody who needs to complaint is in there right to do so as many times as they want to.

You are complaining about people who complaint, absurd.

lol
have you nothing better to do then complain ?

we get it,you're not happy

 

[Ghree-hee-heeezy]

@Weedaholic you ever hit deems with your p80?

 

[Oden]

This particular drop of duals took 10 minutes. Almost double a normal drop time. If someone really wanted a dual then they had a much better shot than usual (perhaps due to US election day - or the fact that it was midweek - or the fact that duals are +$ over p80s).

Blame the game, not the player. Then again... the game isn't changing anytime soon

If your internet is so bad that you can't make the drops on time, perhaps go to a library or friends house if you can? I don't know your exact situation but hopefully SOMEONE has decent internet...

My Internet network is working fine.
The problem is, people are way too fast for me
My mistake and always tried the prebuilt p80s.
I would try a custom p80 next time.

i own a p80 and it is the best portable vape i have and i will be buying another one for back up if i can.

if that upsets people then that's not my problem.

if you dont like the way the the system is set up to purchase one then dont buy it plain and simple.
how many times do people have to complain about the same thing over and over.

life is not fair get over it.

It's up to you to think of it this way.
We just don't have the same mentality at all

I have been vaping since 2014 now and have never had a portable vaporizer. And yet I am spoiled on this side. I have a sublimator, Flower Pot, the Elev8r and Supreme V6 (SV6) all of them in Enail mode (incredible too), a glass symphony and a ditanium. I think I have what it takes to get the most out of weed.
No portable vaporizer has interested me until the famous Tetra p80 that many have been tearing off since it was released, and of course the Nomad 2 (big crush)
One is enough for me. I know that I would use it for a very long time (I am on the go a lot) and if I were to change it it would only be for a new lamart creation that is worth this change.
Everyone has these priorities.

 

[VapeEnthusiast]

My Internet network is working fine.
The problem is, people are way too fast for me
My mistake and always tried the prebuilt p80s.
I would try a custom p80 next time.

That's fair. The customs are MUCH easier to secure.

If you've been missing out, go for a custom!

 

[Vape Halen]

can someone maybe share their experience with shipments from lamart? my unit got shipped on the 24th october and it hasnt arrived yet, even though I live in europe, so delivery should maybe be faster than to the US. should I be worried or is this to be expected? thx guys!

 

[Weedaholic]

My Internet network is working fine.
The problem is, people are way too fast for me
My mistake and always tried the prebuilt p80s.
I would try a custom p80 next time.



It's up to you to think of it this way.
We just don't have the same mentality at all

I have been vaping since 2014 now and have never had a portable vaporizer. And yet I am spoiled on this side. I have a sublimator, Flower Pot, the Elev8r and Supreme V6 (SV6) all of them in Enail mode (incredible too), a glass symphony and a ditanium. I think I have what it takes to get the most out of weed.
No portable vaporizer has interested me until the famous Tetra p80 that many have been tearing off since it was released, and of course the Nomad 2 (big crush)
One is enough for me. I know that I would use it for a very long time (I am on the go a lot) and if I were to change it it would only be for a new lamart creation that is worth this change.
Everyone has these priorities.

i get your point in people having 3 and 4 units,there is no need for it but that is a persons choice if they want to buy ten of them.
personally i would want two at most, only incase something went wrong with my current p80 so i would have a back up.

well i wish you luck on the next drop and the reason people keep failing is they keep going for the pre built.you are better off going for a custom slot.

EDIT: if you dont mind using a 510 mod try snag a tetra x if you fail to land a p80
it has the same heater as the p80 and it is usually easy to get one.
you could use this until you get a p80 and you could sell the tetra x on then if you wanted.

like i said, i wish you luck on the next drop.

@Weedaholic you ever hit deems with your p80?

no i did not

 

[zor]

I dunno why everyones getting so butthurt..
Its been stated mutiple times how to go about signing up and purchasing at the time of the drop, i realise that some people may have shit internet or be at work but thats nothing on lamart. I grabbed a custom p80 (first time trying) on the drop before last, in the middle of a 12 hour shift working in a warehouse that doesnt allow me to have my phone on me when working. Still managed to set an alarm and go out on a break for 10 minutes and grab a slot had to give authorisation with codes for my bank aswell cause i messed up and chose the wrong payment type, the sweats were real haha but it wasnt hard. I followed very simple instructions and planned ahead. Anyone complaining has no real reason to be salty. Sure if you really wanted that prebuild i guess that sucks but you guys realise that you can have a custom be made to the same specs as the pre mades and the cost will be the same 235 right.. Lay off the guy, waitlists are lame. Who would want a vape to rock up in 2 years when who knows what could happened in the meantime,

Your experience doesn't match with mine at all. I too set an alarm, was refreshing the page patiently 5 minutes to the time indicated and through 10 or 15 minutes later. Not one listing changed from out of stock during that time. Bad luck, bad timing, sure, but to me the process feels flawed and broken.

Then again, look at how bots snag concert tickets and the latest graphics cards, at least we don't (?) have that problem with vape releases, just normal human v human competition

 

[Weedaholic]

can someone maybe share their experience with shipments from lamart? my unit got shipped on the 24th october and it hasnt arrived yet, even though I live in europe, so delivery should maybe be faster than to the US. should I be worried or is this to be expected? thx guys!

I would not worry you should get it soon.
i think mine was 2 to 3 weeks in the post not exactly sure.

 

[GoldenBud]

can someone maybe share their experience with shipments from lamart? my unit got shipped on the 24th october and it hasnt arrived yet, even though I live in europe, so delivery should maybe be faster than to the US. should I be worried or is this to be expected? thx guys!

covid19 issues.. less people work.. or so.. but the lamart's registered shipping is still fast tho, according to my experience...15 days max...

 

[Stooper]

Was it just me that practiced for an hour !!! Got one this time, also not vaping beforehand seemed to help a lot, bit of a shock that

 

[Ripstar]

I tried for a Dual yesterday and got time zones mixed up....damnit! Pretty bummed because I showed up on time for fridays drop..... Oh well, next time I will have my cc entering skills maxed the fuck out...Congrats to everyone who got what they wanted!

 

[CremeFraiche1127]

Just out of curiosity, has anyone who managed to snag a pre-built unit last Friday gotten their order status changed to "Shipped" yet? Mine is still marked as "Packaging" and I *think* I read somewhere on here that he ships on Tuesday. I very well could be wrong though!

 

[thunderstealer1337]

He ships once a week, what day it is of the week, I dunno. You may see delays of shipments through our own shipping infrastructure after it passes customs too

 

[CremeFraiche1127]

He ships once a week, what day it is of the week, I dunno. Will you be calling usps or dhl if the package sits in a distribution center longer then 24 hrs lol?

I wasn't familiar with how he ships so I was just asking lol? I don't really care how long it takes to get here once it ships.

 

[thunderstealer1337]

i see a new listing on lamarts site, a do not buy this for only $155,

only $155, and he says do not buy, why, now i want to buy lol

and tbh there is a problem, another brand new p80 sold for $400 on entx, he literally admits hes buying and reselling lol

 

[GoldenBud]

i see a new listing on lamarts site, a do not buy this for only $155,

only $155, and he says do not buy, why, now i want to buy lol

and tbh there is a problem, another brand new p80 sold for $400 on entx, he literally admits hes buying and reselling lol

i guess somebody refunded twice(155CHF is the exact price of the TETRAx) , and he contacted lamart for a private listing sell, and the slots are just a mistake lol? should be only 1 slot tho, so that's why 'do not buy'

about the 400$ / 275$ tetra-evic entx... karma will catch them, just LATER....

 

[Oden]

Congrats to everyone who scored a P80 on the last drop, your efforts and patience will soon be rewarded.
Here is my sexy P80

Still amazed at your craftmanship and attention to detail of your work @funkyjunky


The P80 is awesome, I can sip or rip at will. I have been starting at 390* and finish at 420* if I feel too. I like the warmup to cruise, so cool with the red to green led feature. The first draw I like to give it a few puffs during, like back in the day when you puffed a big fatty to get it going again. After that not needed to finish session.
This thing extracts evenly with no stirring, amazed how clean the screen is after each bowl. I usually sip but that does use more battery. It does like batteries, so keep a back up charged. The Sony VTC5D and Molicel P26A seem to work good for me. Both average 5 to 6 bowls a charge.

I have noticed also that my P80 during warmup holds a more steadier temperature then my TertaX with Tubo using the same batteries? It hits cruise quicker because of the less fluctuating temperature. Maybe I should try updating my Tubo on my others mods, Ralph may have done some more tweaking, or could it be the cable from mod to heater, Ralph? I just know my P80 heats up quicker

I have been using the short bendy stem and like the form factor together with the P80. The wife says I look like a kid with a juice box sucking on it.
Waiting on a capsule stem yet with cooling inserts. I find the nub is more stealthy but does retain heat when ripping it. I've tried a few longer glass stems too, they cool better but larger, so I've been going back to the short bendy. I plan on grabbing another as a back up sometime.

The P80 feels more comfortable and balanced to me holding it with the fire button wedge between my thumb and pointer finger. The small bendy stem fits perfect too when spun around and slightly to the side. With it turned around I can see the screen to adjust temperature and give a quick squeeze to fire. Turned other way it feels front heavy to me, just my . Try it you might like it?

With the zigzag cut outs you can really feel the heat build up and escape out the cuts when ripping, I like it. With the more cut outs you can see the Tetra engine in all its glory and can see how far away the end of your stem is compared to the screen inside the P80. I noticed when changing out to different stems and there was a slight slower vapor extraction and a few needed more heat. The bendy stem is about 1/16 away from screen and really extracts the best evenly.

When my P80 arrival day came, after I chased down the mailman 3 weeks 3 days total after shipped.
I opened the box and a smell of a campfire came over me, I was like wow Ralph most be cold and is burning a lot of wood at his shop. I then realized it was from all the lasering work done on the P80 and my Piro .

After my first session with my new P80 I gave it a nice Eds bomb ass butter bath. The Lacewood from sitting a few weeks had been pretty dry so it sucked it up well after a nice warmup with a hair dryer. The butter brought out all the contrasts in the woods and is so smooth to the touch. Your P80 will thank you
I enjoy buttered all my wood vapes, sorry I have a problem and I know it

Stay healthy, safe and enjoy your 420

What is the name of the inlay tape on this p80?

 

[GoldenBud]

What is the name of the inlay tape on this p80?

"Sexier than Sexy"


hmmm.. some oak inlay ? some or wenge oak I'd say
btw
One of the sexiest tetra I'd ever seen

 

[Oden]

"Sexier than Sexy"


hmmm.. some oak inlay ? some or wenge oak I'd say
btw
One of the sexiest tetra I'd ever seen

It's a lacewood that I want, this wood is very beautiful il but I need it with an inlay strip and I can't get an idea of the stripes with the lacewood .. this one is very beautiful but on lamart's site what is it?

what is the most beautiful p80 tetra you have seen?
Thank you.

 

[GoldenBud]

tp80burl1back hosted at ImgBB

Image tp80burl1back hosted in ImgBB

ibb.co

or

tp80burlalchemistback hosted at ImgBB

Image tp80burlalchemistback hosted in ImgBB

ibb.co