Smknbud
Well-Known Member
Anyone else notice the acrylic handle attached to the Bowle cup at beginning (00:44) of video? I'm not seeing things right?
Anyone else notice the acrylic handle attached to the Bowle cup at beginning (00:44) of video? I'm not seeing things right?
Jerry had one and said theyre testing prototypes for TafeeAnyone else notice the acrylic handle attached to the Bowle cup at beginning of video? I'm not seeing things right?
Yup, and sounds like based on feedback from Jerry, they'll be tweaking the shape for an even better user experience.Jerry had one and said theyre testing prototypes for Tafee
I have the S.S. IO let me say nothing compares to the IO. It’s potent and obviously quick. You can get two quick draws and be good for the next couple of hrs. Makes everything convenient. Although there are horror stories of the IO. I have had mine for 7 months and have not run into any issues.Gotcha, I just worry about the health of my lungs too much. I should probably have more faith, good heads are involved in this
On a separate note, I LOVE the ability to have instant vapor. I always wanted a Grasshopper IO because of that, but I dont know anymore. Anyone have both, and can testify? Hopefully the company survives through the IOs product life so a more reliable one can be produced eventually... lol
I find the puck and stem get warm but never uncomfortably hot.Am I the only one who feels that the puck and stem get too hot from successive or chain hitting?
I'm using the cup as insulation now, besides it looking better and feeling more stable with it. But mainly so that I can rest the puck on my palm with fingers on plastic cup parts. I get the feeling the cup was designed with this in mind. For insulation of the hot puck. For this, I'm preferring the Auto fire function. Holding down the button is just too hot unless I avoid touching the bowl area but that's directly on the other side. Again, this only happens when chain hitting it. Mighty does the same at highest temps but is not as hot possibly due to larger mass and fins.
Successive hits at level 4 will make mine too hot to touch. I don't remember anyone mentioning this or am i just too sensitive? I do have two and both are the same.
Battery life really isn't ideal for those who uses level 3 and above. I could get to 4 bowls if i temp step from 2. If I start at 3, I only get 3 bowls, which is not the end of the world but like i said, is not ideal. I wonder how long till it reaches 1 bowl per charge? Cos it'd be unusable then?
I am already seeing quartz, SIC or even ruby bowls being introduced soon. It'll be a gold mine for Tafee lol.
Besides that, replacement batteries would be sick, or people would just have to fork up to buy more pucks. Perhaps the heater is meant to have the same lifespan as the battery? In that case, replacement batteries would seem moot.
I'm an idiot when it comes to WPAs. What are some of the best ideas for them so far?
I do like this vape very much. Words cannot describe how thankful I am to Taffee just for the opportunity to Vape in the same room with my wife, who does not partake. No more exhaling out the window or bathroom lol. This is already worth the $400++ price tag imo LOL.
The only time I notice heat from the puck is when I'm resting my hand on the lowest part of the stem but it's not uncomfortably hot plus I never seem to have my hand there anyways. I've hit a kief topped pot with 3 back to back draws on level 4 and pulled the pot out seconds later and although its toasty I don't burn my hand which I can't say the same for my other dosing cap capable vapes. You must be slightly sensitive to the heat if both your pucks do it.Am I the only one who feels that the puck and stem get too hot from successive or chain hitting?
I'm using the cup as insulation now, besides it looking better and feeling more stable with it. But mainly so that I can rest the puck on my palm with fingers on plastic cup parts. I get the feeling the cup was designed with this in mind. For insulation of the hot puck. For this, I'm preferring the Auto fire function. Holding down the button is just too hot unless I avoid touching the bowl area but that's directly on the other side. Again, this only happens when chain hitting it. Mighty does the same at highest temps but is not as hot possibly due to larger mass and fins.
Successive hits at level 4 will make mine too hot to touch. I don't remember anyone mentioning this or am i just too sensitive? I do have two and both are the same.
Battery life really isn't ideal for those who uses level 3 and above. I could get to 4 bowls if i temp step from 2. If I start at 3, I only get 3 bowls, which is not the end of the world but like i said, is not ideal. I wonder how long till it reaches 1 bowl per charge? Cos it'd be unusable then?
I am already seeing quartz, SIC or even ruby bowls being introduced soon. It'll be a gold mine for Tafee lol.
Besides that, replacement batteries would be sick, or people would just have to fork up to buy more pucks. Perhaps the heater is meant to have the same lifespan as the battery? In that case, replacement batteries would seem moot.
I'm an idiot when it comes to WPAs. What are some of the best ideas for them so far?
I do like this vape very much. Words cannot describe how thankful I am to Taffee just for the opportunity to Vape in the same room with my wife, who does not partake. No more exhaling out the window or bathroom lol. This is already worth the $400++ price tag imo LOL.
Well... room temp is the same here as it is there correct?I must be really sensitive or its really cold where you guys are?
With the cup, the heat is fine but I'm certain its too hot for me without. With that being said, I'm still a satisfied customer.
It is summer here and I vape in the shed. It has been more than 90 degrees for several weeks now. Last day of summer today, but it will be a few more months before it gets much better.Well... room temp is the same here as it is there correct?I’m ribbing you!
The dust is in the hole the stem goes in that holds the pot.........how is that NOT in the air path.
So much being let slide with this one based on some sales peoples names?
Anyone here try to clean a pots rim and then see if you can get (what I assume is ) Aluminium dust from the notched element onto the pot? I just did, took me about 15 ins and outs to notice a few additional little particles on the crucible. Not sure what else it could be
I know it's supposed to stay out of the airpath, but can anyone else confirm?
Here are 3 pics I took, 1 and 2 are with a clean rim and the third shows the grey dust that built up over those 15 times.
![]()
![]()
![]()
It looks almost as though the pot can hit the metal ball on it's way in and out... Imo that would leave it in the airpath.
Cleaning the pots now... Before anyone says anything about how dirty they are... Lol
Edit: Just had my personal best charging time of one hour, flat! I wonder what gave the Tafee the kick it needed![]()
I'll replicate it again in a little while... Debating on not using the vape until further notice thoughI see some specks of something in 3rd photo, but it's not in focus. The dirty screen is in perfect focus though.
i will get at tuesday a new unit - Now I'm unsure about not trying it out until that has been clarified, so that I have a chance of a possible returnI'll replicate it again in a little while... Debating on not using the vape until further notice though![]()
I went ahead and scraped that area with my fingernail to placate myself. Nothing. The spot is worn smooth at this point so I'm going to use it as usual.I'll replicate it again in a little while... Debating on not using the vape until further notice though![]()
Unfortunately your nail is not as hard as aluminium, nor is it used to hold the stem in the vape, making your "test" (same level of "test" as my "test", to be clear) information potentially less important than you may think...I went ahead and scraped that area with my fingernail to placate myself. Nothing. The spot is worn smooth at this point so I'm going to use it as usual.
I'm seeing what your seeing with your TB per your photos. I don't doubt you. I've tried to duplicate it and can't. I see nothing accumulating along the rim of my pot, I even grabbed a loupe for a close up view.Unfortunately your nail is not as hard as aluminium, nor is it used to hold the stem in the vape, making your "test" (same level of "test" as my "test", to be clear) information potentially less important than you may think...
After cleaning my entire unit, head to toe (at least where it counts for this, I didnt bother cleaning the inside of my stem lol):
15 ins and outs WHEN PURPOSELY AVOIDING THE BALL (with the pot) seemed to produce no visible debris, though its pretty evident more material has been removed from the stem
However, after those 15 I tried one where the pot hits the ball on the way out, and it is there without a doubt. Sure, its on the outside of the pot but I can easily see that getting into the bowlShame I cant catch the reflectiveness of the material in my camera.
![]()
Try it yourselves, its not too hard.
Bruno, Tafee, just go stainless steel please D: