Phase3 Vaporizers
- Thread starter invertedisdead
- Start date
rowbam
Well-Known Member
ZX landed! Some first sesh thoughts:
- Burn off was real
- Damn this thing is tiny
- Amazing efficiency from small amounts
- Flavor is real, pure convection
Garybuchanen
Well-Known Member
You’re saying it has a long burn off ? I got mine secondhand so I wasn’t aware on that. Elaborate if you will .. GB
rowbam
Well-Known Member
Not super long. Most was around 400-500F for 5 minutes, but very perceptible.
Garybuchanen
Well-Known Member
Got back home yesterday ..less then two minutes to heat up ,probably more like <1 but I let it sit a min longer…this vape is the truth ! Always ready to go ! Maybe it’s a controller thing but I’ve been roasting a bit higher then what most shared haha been rocking consistently at 547 right now. Had a question maybe someone can answer ,I saw a gorgeous wooden handle for the zx on the ig page..it said Ed’s tnt so I looked that up but didn’t see any phase stuff on his site..anyone know where I could procure one of these gorgeous pieces ?? Thanks so much. This ball vape tech is changing the game 111%!
All love
GB
All love
GB
EasyVape
Well-Known Member
For the 3" handle on the ZX you may need to use a single wrap of electrical tape around the metal collar to act as a shim when you install the handle(otherwise you may have a bit of wobble from a loose fit): https://edstnt.com/products/coil-cocobolo-handle-3l-v2
Garybuchanen
Well-Known Member
Doh ! Thanks my friend ordering asap !
Hopefully double posting isn’t frowned upon..I was curious if anyone has experience with using some sort of portable power bank to power the zx out and about and how that went ? I’m on the go a lot and would like that option. Currently looking at this as a potential one..appreciate any thoughts
Ernielicous
Well-Known Member
Yes that would definitely work I used to use it a couple years back to power up my pids/ballvapes. I think after a couple years it becomes a paper weight tho bc mine doesn't charge anymore. Nowadays I use this it complements my power tool collection very well (have a bunch of Milwaukee batteries already) https://a.co/d/7rhsNY9Hopefully double posting isn’t frowned upon..I was curious if anyone has experience with using some sort of portable power bank to power the zx out and about and how that went ? I’m on the go a lot and would like that option. Currently looking at this as a potential one..appreciate any thoughts
Garybuchanen
Well-Known Member
Wow my guy !! Recently got into electrician work and Milwaukee is the one ! Just what I want now …would look so good in combination with the zx and coil..how much use with the zx would you say you get out of a xc 5?
GB
Ernielicous
Well-Known Member
I feel that if you just leave it on the whole time it lasts like 1 hour - 1.5 hours. To me, it seems like it uses the most energy at startup when it's heating up trying to get to temperature. sometimes when I switch between ball vapes while using the same battery, I notice it dies a lot quicker (bc it has to heat up the new head from 0° till preferred vaporization temperature.)
Maybe I am misunderstanding your post but when you say:
That also might explain this:
It sounds like you aren't letting the thermal material (sapphires/rubies) heat soak. I assume you aren't just waiting for the PID controller to display the right temperature? To work properly I'd let those gems soak for at least 5 minutes but 10 is better from cold.
That also might explain this:
EasyVape
Well-Known Member
If anyone is interested in the stand choices. I've tried the stock metal stand, OWW titanium stand and the RC Porcelain stand. I prefer the RC Porcelain stand for the ZX and ZXL. It doesn't bleed any heat from the head and offers similar protection to the OWW titanium/aluminum stand at better price point. https://ritual-co.com/collections/q...t-jade-porcelain-stand?variant=42867657998558
nicknobody
Well-Known Member
I have a Milwaukee top off and I can leave mine on for 3 hours easy with a 6amp battery and a ch pid/bzero. My 5 amp is OLD and I still get 2 hours.
What pid are you using?
I’ve been racking my brain. I almost can’t wait any more. Ive sold off all my ballers and I’m currently ball(vape)less.
zx or zxxl ?
Does the zxxl come with a pid at the preorder price? I’ve glanced at the product page and just hoping that I missed something…
namasteIII
Well-Known Member
Damn this is the exact setup i’ve been planning. Thanks a ton for posting it! Glad it seems like I made good choices too.
Cheebsy
Microbe minion
I don't believe so:
I think you need a PID and a 25mm coil setup for the head to sit in.
nicknobody
Well-Known Member
Thanks for that. Makes my decision easier.
The old fan favorite zx it is. The only vape I always wish I had other than what I have/had
Garybuchanen
Well-Known Member
I do let them heat soak but that less then 2 minute heat up gets it just about to where it would heat soaked. The coil I have is a good one I suppose ? Works so well ..just tried it sitting in the truck plugged to the 120 outlet. Less than 1:30 sec I’m blowing massive clouds…thanks so much Ryan !!
GB
Ernielicous
Well-Known Member
Hey brother I have a disordly conduction pelinail & a 6 amp battery too. I agree. that one lasts about 3ish hours.
The 5 amp does last around 2 hours.
When I said 1 - 1.5 hours I Actually misread & thought he asked me about a 1.5 amp battery, not the 5 amp lol
staircase slight of hand
Well-Known Member
Auber fixed that! From their site:
Product Update (5/21/2024): A new feature is available in the current firmware (v2.2.0) that allows users to disable the power button and use the controller with a smart plug or a Wi-Fi plug.
That's neat! I don't need this feature but I'm glad it's there for people who want it. I don't think there is any way for a customer to update the firmware, but at least now folks can look at the label to see if they have 2.2 or greater.
lazylathe
Almost there...
Sorry for the later reply!
This was part of the RooR Vapor collection. It came as a set with the bowl and heater.
Unfortunately I do not think they make them anymore.
Herborizer make a similar one but it is not as nice to use as it has 4 large holes versus the +-12 holes the RooR has.
I have had mine for around 10 years now and it's the only glass piece I use.
RustyOldNail
SEARCH for the treasure...
You are correct, unfortunately you have to send it back to Auber for any firmware updates. I did this once, but since I would never turn on a heating appliance remotely due to safety concerns, thankfully I’m not interested in this update. My last firmware lets me adjust the auto shutoff as well, another safety feature I always employ!
My MaxVapor PID, has remotely updatable firmware, which was smart, but who knew that company would STOP supporting their product a few years ago…..
Chicken No Name
Dazed and confused
If the RooR is out of stock, then I recommend this from ehle.
I've been using for a few years now and my favourite easily.
Water filter for vaporizer Ehle Power Tower
The Power Tower humidifies the vapor and cools it additionally. This gives you a better vapor feeling. Especially recommended when you need to cough :)
madhockeydad
Art is beauty
Schroedinger ZXXL. My bet is he is waiting a few more days to see if any more pre-orders will come in. I enjoy the suspense.