O'Connell Woodworks Vaporizers
- Thread starter O'Connell Woodworks Vapes
- Start date
Vaporware
Well-Known Member
I haven't seen their upload. I don't know what Geotagging is so it shouldn't bother me....ha I'll go take a look. Thanks!
I will bet you a hundred billion dollars I have a NC. Okay? Lol
For a hundred billion I’d find someone to borrow your NC long enough to win the bet!
Geotagging is marking your location. If it’s taken from your IP address it’ll show where your Internet Service Provider (ISP) is, which is probably in/near your city unless you use a Virtual Private Network (VPN), Proxy or something else to disguise your IP.
If it's taken from the image’s metadata and the phone/camera you took the picture with has GPS it’ll probably show exactly where you took the picture.
There are tools (some online) to strip that kind of metadata before uploading, and your IP is already not much of a secret unless you’re trying to hide it, but if you live somewhere that cannabis is still illegal it’s good to be aware of these kinds of things.
Haha better have you write your user name next to it just to be sure lol. I'm pretty pumped to see it you've been trying for a bit now
kushkush
happy camper....
Okay, here goes..... my new Noisy Cricket with a J-hook. Looks like @VaporWare owes me a lot of money! Ha
Last edited:
I've got an order in for one of the Noisy Crickets. Super excited to put it to some serious use 
Does anybody have experience with the current shipping wait time from O'Connell? The website says they are experiencing high demand and obviously coronavirus slows things down.
Cheers.
Does anybody have experience with the current shipping wait time from O'Connell? The website says they are experiencing high demand and obviously coronavirus slows things down.
Cheers.
@O'Connell Woodworks Vapes is good stuff man. Easy to talk to and good productsI've got an order in for one of the Noisy Crickets. Super excited to put it to some serious use
Does anybody have experience with the current shipping wait time from O'Connell? The website says they are experiencing high demand and obviously coronavirus slows things down.
Cheers.
kushkush
happy camper....
You've got a lot to look forward to, @vapmate! The J-hook in my pic looks big but it's not, it's actually very small. I've orderd 2 more even smaller ones that I'm anxious to get. Also, a small straight bubbler works well. Well anyhoo, let us know when you receive yours and tell us all about it. 
I recieved tracking for my new noisy cricket. It should have improvements from the first one. I believe the mp will be more snug, the wood that keeps the mp from going into far should be thicker, and mine had a gap between both wood pieces that i believe was pulling in cool air so i was using a silicone band from my pax 3 wpa to put around middle. He was easy to talk to and very good customer service id sudgest him to any person looking for butane powered.
My noisy cricket will be here Saturday, which is 3 weeks from delivery date. However I chose a special wood that he didn’t have in stock (Maple burl). I am beyond excited.
Lets see that bad boy.
I recieved my replacement body a couple days ago. Its awesome, my mp is nice snug. I have no more extra air flow through the woods seam. The wood is thicker where the mp rest against. I also believe the bottom o-ring is sunk in a tad bit deeper which is nice that it wont wiggle out easier and the magnets look a lot more clean @O'Connell Woodworks Vapes really knocked it out of the park with all these modifications hes made. He has some awesome customer service, easy guy to talk to. My next butane powered I buy will definately be through him.
I cant seem to figure out how to post a picture directly from my phone onto here. But I will try to link my IG. My noisy cricket
kushkush
happy camper....
Try Imgbb - choose "BBCode full linked" and just paste the link into the regular posting space like here where I'm typing - https://imgbb.com
Diggy Smalls
Notorious
My big ol' bong vape is still going strong. It's been the only vape to completely remove the dynavap from the equation. That's saying a lot. Trust me, it's saying a lot.
Diggy Smalls
Notorious
I love my ohbv and I've been using it daily for a while. I alternate between a j hook, a small dry bubbler, and the inception stem. This thing can be very potent.
I just push out from bottom.? Easy breezy.Can someone tell me how you take out the herb screen from the Noisy Cricket and put it back in without ruining it? I'd like to give it an alcohol bath. Thanks
The Chemist
New member but long time lurker
Try to push it out with something that's wide and flat. Less chance to break it than with a pick, with a pick you can break thru the screen. I just looked at my Noisy Cricket and I understand why you ask that question,there's not a lot of space to work with. Normally I would use the wood handle from a Strorz and Bickel brush to push but it wont fit in this case. Try to find something similar that fill fit and go slow.Can someone tell me how you take out the herb screen from the Noisy Cricket and put it back in without ruining it? I'd like to give it an alcohol bath. Thanks
It just sits on a little wood ledge I believe. Real easy to take in and out. I use the round end of a poker to poke out from bottom and just push it back in from top.
The Chemist
New member but long time lurker
It's the same process to push the screen back in but now you have more space to work so use something that is bigger to push. I think that the pick on the Noisy Cricket will work, just push the screen with the round wood part of the pick, it fits in the oven so you should be able to push evenly on the screen, if it's not to your liking just take it out and replace it. Just push slow and steady and it should be easy.
Diggy Smalls
Notorious
I've been rockin' my O'Connell every day. I usually use the Inception Stem because it's just that good. I vape downstairs in the basement which is drafty. It has a cement floor. I decided to use my over-priced budget glass j hook and beaker, so I set the Stem aside. I started cleaning up when I heard a bright smash right at my feet. My Inception Stem flew to the unforgiving and moist concrete floor so fast I didn't even understand what had just happened. It's broken. But only mouthpiece half of the outer part of the stem. The inner stem is still intact and they are stuck together despite half of the outer stem being broken off.
It shattered so loud.
My heart skipped a beat.
I swept the floor with my head hung low.
That Stem was a beast. It was sturdy and awesome and effective.
All I have left now are store-bought cheapo vanwinkle glass that's gonna break when I look at it wrong one of these days.
That Stem deserved better. I miss ya, old buddy. The other glass pieces will join you in glass heaven soon.
It shattered so loud.
My heart skipped a beat.
I swept the floor with my head hung low.
That Stem was a beast. It was sturdy and awesome and effective.
All I have left now are store-bought cheapo vanwinkle glass that's gonna break when I look at it wrong one of these days.
That Stem deserved better. I miss ya, old buddy. The other glass pieces will join you in glass heaven soon.
kushkush
happy camper....
Oh so sorry, @Diggy Smalls
I wish there was a nice substitute for glass, something unbreakable and see-through. Let me know if that happens.