Discontinued Haze Square

MonkeyTime

Well-Known Member
Same here, but I´m not really bothered. Will wait until next revision and if it works properly I will do the trade in.

Well, @b0, it seems we are in the same boat, and chugging in the same direction. My plans are the same as yours. I am not bothering with it, until it works.

I'm also in that same position....it'll be there to send in when there are some changes.
 

Djsleepy

Well-Known Member
Well I must disagree with the concensus here as of lately. I’ve been using mine daily. No issues. I even took it to a party last Saturday and passed it around and boy everyone was getting visible vapor. Everyone enjoyed it.


Man Im doing great with two ...now I have all the time power.hits.when needed....sorry so many of.you are having bad.experience s.......
 
Last edited:

Petunia Vanish

Well-Known Member
They are around. They made that video a few days ago but then took it off. I think they are busy with a lot of stuff at the moment. I know they really wanna get the micro dose pods out but I think they are changing their design.
Do you have a picture or video of the old concept of the microdose pads
 
Petunia Vanish,
  • Like
Reactions: ataxian

ChickenNugget

Well-Known Member
Here below are the images of the micro dose rings:

We will have two sizes:

1/2 and 1/3

These rings are made of stainless steel and they have unique structure to retain/transfer/divert the hot air and optimize the herb vaporization. They are removable for cleaning as well.

https://imgur.com/a/P21YrVf

https://imgur.com/Y1iP1LO

They should be available shortly. I will post a video of these to show them in action too. I may be able to get it sent to me tomorrow I believe.
 

frank grimes

Well-Known Member
Has anyone needed to change their battery yet? Not sure when I need to swap it out. I’ve had my unit for about 4months and use it once a day but on high temps (~450F). It used to take me about 4-6hits to finish a bowl but now I find I need about 6-8hits and the abv is not as dark as before. Just doesn’t seem to be as hot anymore. Could be my herb tho, which is pretty dry.
 
frank grimes,
  • Like
Reactions: ataxian

ginolicious

Well-Known Member
My unit is still working great but doesn't get much use because I don't like loading so much material at a time.

I am at this point becoming very impatient over the microdose adapters.

I load a bowl and sometimes vape it over two days. On weekends I can kill 1-2 bowls depending if I’m sharing.
 
ginolicious,
  • Like
Reactions: ataxian

Djsleepy

Well-Known Member
Has anyone needed to change their battery yet? Not sure when I need to swap it out. I’ve had my unit for about 4months and use it once a day but on high temps (~450F). It used to take me about 4-6hits to finish a bowl but now I find I need about 6-8hits and the abv is not as dark as before. Just doesn’t seem to be as hot anymore. Could be my herb tho, which is pretty dry.

Have you tried a new coil ? That's what I would check but I myself have found yes batteries drain quicker with temps over 400 and seem to not have the.same.punch as a new one when I got my second.one recentlyrecently it.fires better,longer,harder with no.issue.the one I got three weeks before is now slowing down in punch,charge,etc......in fact I'm picking up a couple of batteries as we speak....price is only 14.00 with sale....hope it helps....
 
Djsleepy,
  • Like
Reactions: ataxian

Konstantinos

Vape Socialist
Hi to all!

I have been following this thread for long time since March. The last pages between 140-170 are left(maybe). I have two questions. I am from Europe. Is there anyone from Europe who recently bought it? Any malfunctions or any issues addressed till now? (considering Vaposhop as the first choice to buy). What about the mouthpiece? Still falling off?

Second question to all, Haze Square or Ghost MV1 with the charger and crucible dispenser in offer? Does anyone have these two? Which one should I get? I already have the Starry V2, Solo II, Arizer Extreme Q, Dynavap M and Fury 2. I want a on demand convection vaporizer. The only thing that is keeping me to get the Square is that the MV1 is in new updated version with no issues and that it needs less herb..

General thought and question; has anyone tried to get any stainless steel rings in the size of the pods to try microdosing? I don't mean from Haze. There are so many shops selling accessories for machines. Did anyone think to measure the pod and get a ring to try it?

I would appreciate to have response relevant to my questions please. And yes I have read too many times all these pages but still is not clear to me if it is finally a good working product or that it depends on each ones luck. Please help. The offer is not for long time.. I want a Christmas gift for myself :)

Thank you in advance!

PS; In page 177 I asked some questions about the Square from people who are using it long time. Still waiting someone answer these questions. From October to December none. Here comes the question why should I continue reading since many of the messages are at least irrelevant to the subject being discussed or expanded too much with useless info? Still waiting for answer. What have changed? :hmm:
 
Last edited:

George1151

Well-Known Member
I asked Haze (through PM on this site) a few months ago about the XL batteries for my Dual V3 which were separating at the tips from the plastic sheath falling apart (regular Haze batteries that came with the unit are fine). They replied through PM in a reasonable time frame saying the batteries could not be re-wrapped but they offered (without me asking) to send me some new ones at a deep discount which I thought was very nice. Since I am in Canada and their shipping to Canada is too expensive I asked at the time how much shipping would cost and they said they would get back to me but it too would be deeply discounted.

That was over 2 months ago and they have not replied to at least 5 PM's asking what is going on.

Needless to say that at least for now I am done with Haze.
 

Konstantinos

Vape Socialist
The ghost mv1 is like those good haze Square hits except every time and not only when the stars align and Jesus permits it. Mv1 uses much less herb.

All in all, the mv1 just takes much less effort all around for me to get what I desire.
Thank you for the brief but into the subject answer! What a surprise! :clap:

Merry Christmas and thank you again!
 

wastedpotential

Well-Known Member
The ghost mv1 is like those good haze Square hits except every time and not only when the stars align and Jesus permits it. Mv1 uses much less herb.

All in all, the mv1 just takes much less effort all around for me to get what I desire.
I'm with AJS on this.
I grabbed a Ghost as I was waiting on my Square to be repaired (2nd time), and when I finally got my Square back, I found I didn't want to put down my Ghost.

When the Square works/worked, it is fantastic. But there is too much work involved (grind, packing, technique) and too many parts to clean with the Square. The Ghost MV1 (newest stealth version) reminded me that vaping is not supposed to be this much work.

I really like the Square, in concept and design. So much so that I put up with a lot of inconsistency and allowed for kinks to be worked out. But, in the meantime, I found the MV1, and now my Square sits on a shelf, next to an elf.

Micropods might change this, especially if they come with top screens to limit how often I have to deep clean the square.

I find the MV1 pods/crucibles a little small, but that might be because I was getting used to the full pods of the Square.

If you have a choice between the two, personally I would recommend, at this time, the MV1 (with the extra crucibles and extra battery).

For customer service, I've had great experience from both (though haven't needed much with my Ghost).
 

AJS

Calm Consistency
I'm holding out hope for the microdose pods but frankly it's taking quite a long time to make something that seems so simple. I want to enjoy those as this vape was gifted to me but if I can't find use Ima have to gift it away too. Hoping hoping.
 

Solomon

Talk to the Beard
I'm holding out hope for the microdose pods but frankly it's taking quite a long time to make something that seems so simple. I want to enjoy those as this vape was gifted to me but if I can't find use Ima have to gift it away too. Hoping hoping.

Is it possible the microdosing bowl failed in testing - that it doesn't work? It seems that funneling the heat thru a small section might be causing combustion. (a poorly packed bowl or clogged holes in the top screen that allows heated air to "funnel" caused combustion for me).

A better solution might be to use a material like the porous metal concentrate pad to make the bowls smaller. Has anyone tried this?
 
Solomon,
  • Like
Reactions: ataxian

ginolicious

Well-Known Member
Is it possible the microdosing bowl failed in testing - that it doesn't work? It seems that funneling the heat thru a small section might be causing combustion. (a poorly packed bowl or clogged holes in the top screen that allows heated air to "funnel" caused combustion for me).

A better solution might be to use a material like the porous metal concentrate pad to make the bowls smaller. Has anyone tried this?

Some have tried this. Some say it worked satisfactorily. Personally I just pack a full bowl. Vape it all or save for another time. Works fine.
 
ginolicious,
  • Like
Reactions: ataxian

Petunia Vanish

Well-Known Member
Some have tried this. Some say it worked satisfactorily. Personally I just pack a full bowl. Vape it all or save for another time. Works fine.
I agree with gino; the concentrate pad as a spacer doesn't work well. (with phase1 unit caused combustion)

I do not recommend.

Instead, we'll just have to wait for official release of micro dose or new version.
 
Petunia Vanish,
  • Like
Reactions: ataxian

Mrb58

Well-Known Member
Just too much work messing with trying to get it to work

Works great 1/3 of the time
Can’t grt any vapor 1/3
Combustion 1/3

Sits on a shelf now

Frankly done with in demand too

Use my plenty/paz2 or concentrate cartridges when in demand needed
 

Mrb58

Well-Known Member
Tried w wax today
Nothing nada Nyet nahin

At this point it is a sunk cost
Trying to use it wasting material and time

Nuff said
 
Mrb58,
  • Like
Reactions: ataxian
Top Bottom