Firewood Vaporizer

moondog

It's an obsession but it's pleasin'
Greetings all,

Hope everyone is doing well.

It's been a long while since I was last here - been dealing with a slew of life challenges - but I now come in search of guidance.

The time has come to replace my pile of aging 18650s.

I'm hoping to glean some insight as to the latest thinking on which brands and specific models seem to be best suited to our beloved Firewoods; specifically, the FW9.

I've been using Samsungs for a long time and I know Molicells were getting a lot of favorable mention here. Which models now best fit the "high drain, 20A discharge current" parameters that Marc calls for in the manual.

Thanks for your help,

moondog
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I've always had good results buying from them.

That is where I have bought from the most as well! Haven't bought in a while though, I have plenty, even if they aren't that new, they all still work fine, but some don't last as long
 
Shit Snacks,
  • Like
Reactions: moondog

moondog

It's an obsession but it's pleasin'
That is where I have bought from the most as well! Haven't bought in a while though, I have plenty, even if they aren't that new, they all still work fine, but some don't last as long
That's where I'm at. All my remaining batteries are years old and are in constant rotation. They get tired as quickly as I do when walking up the stairs.
 

BabyFacedFinster

Anything worth doing, is worth overdoing.
Hey folks, I wanted to ask about traditional hash in the FW9. I just got a temple ball of some nice hash and have been using it in a dynavap. I hear this thing is good for old school hash and was going to wrap a piece in some organic cotton.

I tend to like the lower temps with flower and often leave mine on 320F. If I wanted to get some good vapor off some hash, where would the lower end of the range be? I do like to keep it low because I want to get any terp flavor I can. I find after a few hits in a dyna the taste turns to what pencil shavings smell like. I know, sounds weird. Thanks!

Thanks friend!

BTW, I asked because these guys are having a big sale: https://www.18650batterystore.com

I've always had good results buying from them.
I've had nothing but positive experiences with them. I recently swapped out all my 18650's. Some were older, some newer. I didn't mark them so they all got mixed up and you never knew how long one would last. I just cleared house and started fresh with all new ones. I rotate for use in my FW9, TM2 and Starry for travel.
 

sickmanfraud

Well-Known Member
Can anyone recommend a glass bong on the smaller side that work well with the Firewood? I like the MkII Globe that Sneaky Pete sells but it's expensive and larger than I'd like.
Look on Aliexpress. The search function is a pain but if you search you will find options.
 
sickmanfraud,
  • Like
Reactions: FatOldEnt

moondog

It's an obsession but it's pleasin'

passenger

is this thing on?
What methods are available for safe deep cleaning the ceramic bits, the elbow like oven, bowl and spacer? I got a used FW9 and apparently is has some soaked-in ISO and resin / reclaim that I would like to eliminate. It's deep in the ceramics, just a cotton wipe would not be enough.
 
passenger,

Duba

Well-Known Member
Accessory Maker
What methods are available for safe deep cleaning the ceramic bits, the elbow like oven, bowl and spacer? I got a used FW9 and apparently is has some soaked-in ISO and resin / reclaim that I would like to eliminate. It's deep in the ceramics, just a cotton wipe would not be enough.
I usually soak ceramic pieces in ISO for a few hours, then rinse thoroughly with clean water and leave to dry for 24 hours. they don't come back pristine white, but clean.
 

seedy53

Well-Known Member
I usually soak ceramic pieces in ISO for a few hours, then rinse thoroughly with clean water and leave to dry for 24 hours. they don't come back pristine white, but clean.
is it true you make wood sleeve for the angus enhanced?
 
seedy53,

Duba

Well-Known Member
Accessory Maker
Also for the FW9?
yes sir! For Fw7 and Fw8 also.
Some examples (different dye styles, with removable or without strap, laser engraving, marbling paint) :
IMG-20231107-133642.jpg
IMG_20231107_163309.jpg
IMG_20231110_140518.jpg
IMG_20230625_163413.jpg
IMG-20241006-165943.jpg
IMG_20240406_192514.jpg
IMG-20240207-105050.jpg
IMG-20240125-142836.jpg

I have a discount code for FC users : FC10LK (-10% on whole site)
 
Last edited:

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
OK, I think I’ve decided on a FW9 for my next VAS purchase. Are they likely to have a Black Friday sale, or should I just pull the trigger now? I know some smaller producers don’t really have sales.

The price dropped recently, to the same level it was at during Black Friday and 420 sales, so probably not, but no way to know for sure
 
Shit Snacks,
  • Like
Reactions: Grass Yes

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Could you just torch it?

I would never torch ceramic, but I would also never torch steel screens like some people do, but yeah that seems like you would just blacken the ceramic more depending on the torch you can try cooking them in the oven or something might be safer too I think
 

warren0728

Well-Known Member
so i have been playing with my new fw9 over the past week and i really love almost everything about it (i do think i like the fw7 better.

my main gripe with the fw9 is the button ... it feels flimsy like it might fall off at any moment and sometimes i can't even tell if it is engaged by feel (it usually is but without the buzzes i might think it hasn't engaged yet.)

other than that i really love this thing and it is in my main rotation!
 
Last edited:
Top Bottom