GoldenBud
Well-Known Member
yeah, it also important to see if the connector of this piece is compatible with the WS power inlet, if not, just get some adapter... but Voltage amperage is fine
Ed's WoodScents Log Vape - Ed's TnT
- Thread starter Ed's TnT
- Start date
Misterhyde
Well-Known Member
This VAS is hard to control! I hadn't even really considered buying one of these. I recently sold a couple vapes hoping to buy 2 different specific vapes. I saw a used Woodscents pop up and jumped on it. I love the beauty of Ed's work, can't wait to see how it performs.
cosimo
Well-Known Member
Last edited:
Vapor Mainline
Vapor (Ent)husiast
If you have a cool titanium dynavap stem in mind you can toss the tip on and use that as your stem. Or if you want a regular Ti draw wand someone could probably hook you up. I haven’t personally seen a metal construction wpa but honestly I haven’t looked too hard either…
Ti or S/S,
The DDave Omega Waterwand for VapCaps
The Omega Waterwand!(For those who already have their own VapCap Caps and Tips!)G2 Titanium or 316 Stainless steel.The community asked for an unbreakable Waterwand.The community will have an unbreakable Waterwand. Each order will contain:An Omega Waterwand (either G2 Ti or 316 SS)9 x red high...
www.ddavemods.com
LogicThug
Member
I was thinking something like the plain 14mm WPA where I could set a basket screen into deeper for a larger load size, also thinking of something slightly step down tapered so it could be supported in a 45 degree stem without needing a hand holding, might get a swivel arm clamp for that. Just random ideas, I will have a better idea of what I want once I receive the Woodscents and get some uses in. May not want anything at all after gaining my footing with it.Ti or S/S,
The DDave Omega Waterwand for VapCaps
The Omega Waterwand!(For those who already have their own VapCap Caps and Tips!)G2 Titanium or 316 Stainless steel.The community asked for an unbreakable Waterwand.The community will have an unbreakable Waterwand. Each order will contain:An Omega Waterwand (either G2 Ti or 316 SS)9 x red high...www.ddavemods.com
GoldenBud
Well-Known Member
if you can't find ti wpa, juse use some wooden stem that support spikey glass/ti condenser i think.. i used lamart stem with spikey glass insert, it felt like a glass log.. really clean vapor..
the Ti cover of the WS feeler like glass by the taste..
cosimo
Well-Known Member
So, I received my VVPS today (cheapazon with free shipping to my country in less than a week!) and upfront there is a huge benefit for me compared to the stock dial. Not sure if this is normal, but my WS (lite version from SP) doesn't buzz anymore! Not a tiny bit! From day one there was a very faint but highpitch buzz/noise coming from the base of he unit which got louder the more I used it and also depending on the angle on which I held the unit. I assumed the noise was normal (ive had other vaporizers that made the same or very similar noise when heating up), and that it had gotten worse because of my improper handling of the unit and its cable/powersource (really banged the shit out of the dimmer and twisted the cable really hard).
Oh how lovely it is not to hear it anymore! Now I assume that this sound wasn't actually normal and might have been due to a faulty cable/power source which I just ruined even more with my bad habits. So if you have that sound, make sure the cable and dimmer are in good conditions, and take care of them hehehehe.
Oh, and
Oh how lovely it is not to hear it anymore! Now I assume that this sound wasn't actually normal and might have been due to a faulty cable/power source which I just ruined even more with my bad habits. So if you have that sound, make sure the cable and dimmer are in good conditions, and take care of them hehehehe.
Oh, and
is a completely true statement for me too, and even at 8.06 in my VVPS it is still quite a facemelter for me! Still have to check how accurate this VVPS is with a multimeter, but so far the 7.04 - 8.06 setting range is working quite well for me... I think it's my sweetspot/range equivalent to what I had found with the dimmer but it's strange how much better it feels now ... I now get waaaay more consistent back-to-back hits and I just feel the unit now responds much better to changes... is this how my WS should have been performing this whole time even with the stock dimmer??? I really need to start taking more care of my electronics!
LogicThug
Member
Got the Woodscents delivered yesterday so today is the first full day with it. Absolutely primo off a J-Hook. Just got the traveling light adapter and can confirm the xtar pb2s doesn't have enough juice for it. A shame, wanted to be able to use 2x21700 cells. Have a few anker 20w pd banks around I need to dig up and an iniu coming in tomorrow.
Misterhyde
Well-Known Member
I also just got a woodscents delivered yesterday, I was able to try it for the first time today and man was I impressed and HIGHLY medicated. The first bowl seemed too restricted, I think I packed it too tight but also wondered if the wooden stem was slightly to blame for the restriction. My woodscents also came with a glass stem that holds the Ti tip. The second bowl, lightly packed, with the glass stem was simply AMAZING! The flavor was outstanding, I don't think it can get any better! The effects also hit me quite hard, I wanted to test it more but I felt like I was on another planet. This thing seems super versatile too. I still haven't tried the full glass stem or the WPA. It sounds like a rant of positive things but I also love the look and feel of the thing, and I just have the walnut. Its much smaller than I imagined it being.
LogicThug
Member
I can confirm that this power bank works as a budget option. About 70-80 minutes running so far and am under 75% charge on the brick atm, going to run the bank dry and see how long it lasts. Ended up about 5 and a half hours at full dial.
Last edited:
Happy Sunday and God Bless you all gang
Misterhyde
Well-Known Member
I apologize if this has been mentioned before, I searched the thread but didn't find anything. I have been trying to use the aromastem but find that it is very loose and falls off extremely easy. This creates a fairly dangerous situation. I haven't successfully used the aromastem once yet without knocking it off and spilling out the dry herb. I know it is suggested to use an o-ring when using the glass stem, however i believe this is just to create an air seal not to keep it from falling off. Any suggestions would be appreciated, thanks.
Ramahs
Fucking Combustion (mostly) Since February 2017
You don't leave the stem on in-between hits.
I have no idea why one would want to do that.
I put the stem on and immediately begin to hit it, and I remove the stem as I'm finishing my hit to clear it with a little cool air. Then I set the stem down till I'm ready for another hit. I don't see how the stem could "fall off" unless you are trying to leave the stem hanging on there when you're not hitting it. Also, that just waists your herb because it continues to cook and release vapor when you're not hitting it, if you're leaving it sitting on top of your Woodscents heater.
Last edited:
CanikUser19
Trenchtown Rock
Something like this plus reducers might give you enough clearance to run dual WS.Would like to order another Woodscents to run dual WS through water.
Where can I find a dual WPA that’s wide enough to accommodate two Woodscents?
New Arrived Glass Drop Down Dropdown Adapter Double Bowl Adapter 14.5mm 18.8mm Male To Female For Glass Water Bongs And Pipes From Glassdiy, $1.86 | DHgate.Com
DHgate.com offers high quality new arrived glass drop down dropdown adapter double bowl adapter 14.5mm 18.8mm male to female for glass water bongs and pipes under the category hookahs with unit price of &price;.
www.dhgate.com
letter never sent
reckoner
Ed just dropped a new Woodscents chamber on his site. Larger bowl but still works with Dyna stems. Sounds like Simrell is making it for him. I copped one to try, will report back!
Ed just dropped a new Woodscents chamber on his site. Larger bowl but still works with Dyna stems. Sounds like Simrell is making it for him. I copped one to try, will report back!
Misterhyde
Well-Known Member
$45 is outrageous to me for such a tiny piece of metal...no thanks.
GoldenBud
Well-Known Member
Such a small price for such a great effect though
