E-Nano from Epickai
BabyFacedFinster
Anything worth doing, is worth overdoing.
Damn, that's some good shit.
I added some CBD isolate for the first time on top of some rosin through the nano. I get a calming effect, but also this strange unsettled feeling. Jury's still out on this stuff. I am liking the little mesh conc pad in the gong though.
ataxian
PALE BLUE DOT
I was going 2 try some other CBD’s?
This year I find THC work’s in my case?
4 other’s CBD most likely is a good element?
4 me THC is my go-2!
Da NANO is very effective whatever works 4 U!
This BANANA OG taste so amazing & da THC% = high number
Last edited:
ataxian
PALE BLUE DOT
We speak FRENCH at home.
My NANO is on 24/7 + OG BANNANA + MEDIUM CAN water pipe = ACCEPTABLE CIVILIZATION
2-morrow CITRUS SAP STRAINS R DECENT 4 LIVING WELL!
Plant material 4 da NANO = LIFE WORTH LIVING
i have some questions if any one is kind enough to help...
optimally, how fast/slow should i be drawing on the e-nano? i feel heat when i take a pretty powerful inhale but if i just slowly sip, it almost feels like no temperature difference to the air. is it better to just breathe in at the same pace as one would normally do for oxygen?
the reason i ask is that i feel like my enano's level 10 isn't especially hot... i would expect herbs to combust at that heat level but mine don't go anywhere near burnt coloured or produce smoke or anything. generally, how uncomfortably hot is using a glass stem with the e-nano cranked up to level 10?
i used a laser thermometer and the highest temperature i could find while picking spots around the metal heating area was 338 degrees and it wasn't directly down the middle of the heating element, which is where i would have thought would be the hottest spot. granted, the laser thermometer cost $10 and it's probably inaccurate but it does measure boiling water accurately.
is an underpowered unit a defect that has been known to happen?
optimally, how fast/slow should i be drawing on the e-nano? i feel heat when i take a pretty powerful inhale but if i just slowly sip, it almost feels like no temperature difference to the air. is it better to just breathe in at the same pace as one would normally do for oxygen?
the reason i ask is that i feel like my enano's level 10 isn't especially hot... i would expect herbs to combust at that heat level but mine don't go anywhere near burnt coloured or produce smoke or anything. generally, how uncomfortably hot is using a glass stem with the e-nano cranked up to level 10?
i used a laser thermometer and the highest temperature i could find while picking spots around the metal heating area was 338 degrees and it wasn't directly down the middle of the heating element, which is where i would have thought would be the hottest spot. granted, the laser thermometer cost $10 and it's probably inaccurate but it does measure boiling water accurately.
is an underpowered unit a defect that has been known to happen?
bizwaxzion
Enigmatic Cannabist
I cannot use mine above 7.5 on the dial. At 8 it will almost instantly combust (visible fire in the gong). It's possible that the cord or dimmer is to blame - if you have a printer cord with similar end, you might try powering the nano with it briefly to see if the temp gets hotter.
ataxian
PALE BLUE DOT
6.2374657890 on my NANO dial controller 4 this Home grown cannabis?
Above 7 is your MEDICINE that wet?
bizwaxzion
Enigmatic Cannabist
I mostly dry stem at 6.2112.
I have actually vaped bud right off the plant in the mid 7's - so, yea, you could say wet.
Through h2o - 6.8765 is my liking.
hujdimislav
Well-Known Member
My unit behaves exactly as you described. Combustion is impossible with my E-nano.
I start at 6 with a couple of hits, then eight and then I finish at ten. And while I am at ten,
I have to work really hard to extract everything (long slow draws) and then I get darker brown,
but nowhere near black.
It was strange for me, because no one here has passed eight, and was wondering the same as you,
but didn't have the chance to post and ask.
I think the moisture of the material plays an important role, but still, at ten we should have better results in higher temperatures.
At some point, I'm gonna use water and I know that I will need higher temperatures from E-nano.
I'm still happy with my unit, haven't touched any of my other vapes since I have E-nano, but I would like
to know the limit of combustion, how far can I push it and maybe unleash its full potential that I'm still unaware of.
So any help would be appreciated.
Have a great weekend everybody.
ataxian
PALE BLUE DOT
I’m jaded but not spaded!
Da NANO I like since I leave it on 24/7 & not to say I love water pipe with a small air hole.
If da Holy Grail is combust 4 U that is your Free right?
I use other vaporizers for different reasons?
However da NANO is used the most!
@lazylathe knows what I’m saying?
Last edited:
BabyFacedFinster
Anything worth doing, is worth overdoing.
Similar here. I would get a light terpy hit at 5 maybe but I've only done that a few times since the hits, while tasty, are too heady for my liking. I find myself at 6.5 for water bubbler hits. I would go 6.25 for dry stem and will go up to 7 for some concentrates, although I typically leave it at 6.5 out of laziness. 8 or above would be extremely dark vaping and then charring at 10, but I have never gotten to true combustion out of the nano.
I think extreme differences depend on the power supply in your home, whether you run some type of converter if you are out of the US, and then possibly an issue with a power cord. The issue could be in the heater unit, but this is not a common report. If mine had a weird narrow range or truly combusted below 10 then I would send it in for a check-up.
Does it really taste like bananas? Like real bananas or like circus peanut bananas? I'd love to try that.
arb
Semi shaved ape
All three of my units get used between 6 and 7 with slight differences between units.
Slightly hotter through water here also but I use the nano's for flower only any more.
Would you consider the range I described above as too narrow? and should get it checked on?
EverythingsHazy
Well-Known Member
Same here. Level 6 measures at just under 390F with my IR gun (which I know isn't 100% accurate given emmisivity levels and also the fact that the air isn't the same temp as the screen on the heater, which isn't the same as the ceramic element). 10 is instant combustion.
Last edited:
SloJimFizz
Unknown Member
This is what a 7 looks like out of a water pipe for me, 2-3 hits. Also I always feel like i get an uneven burn not sure if one side of my heater is hotter than the other or something or im just paranoid? I typically stir frequently with the e-pick https://imgur.com/a/Lv9Z8es
Edit: sorry can't figure out how to get the IMG button to work
Edit: sorry can't figure out how to get the IMG button to work
Very dark for sure. Can I suggest imgbb as a better image hosting site than imgur? It's actually easier and quicker to use and your images will be displayed here for all to see.This is what a 7 looks like out of a water pipe for me, 2-3 hits. Also I always feel like i get an uneven burn not sure if one side of my heater is hotter than the other or something or im just paranoid? I typically stir frequently with the e-pick https://imgur.com/a/Lv9Z8es
Edit: sorry can't figure out how to get the IMG button to work
BabyFacedFinster
Anything worth doing, is worth overdoing.
This is what a 7 looks like out of a water pipe for me, 2-3 hits. Also I always feel like i get an uneven burn not sure if one side of my heater is hotter than the other or something or im just paranoid? I typically stir frequently with the e-pick https://imgur.com/a/Lv9Z8es
Edit: sorry can't figure out how to get the IMG button to work
I agree that your abv looks pretty dark. If it's getting into the realm of being almost black then I would have a concern. My abv is really not beyond a milk chocolate color. Once you're approaching dark bittersweet chocolate color then you probably getting some charring, which is a step below combustion but you might be developing chemicals that you don't want in your vapor.
My range is from 5.5 to 7 so not too far off in margin, again you want to have a comfortable sweet spot where you can get the level of herb roast that you want below charring. That would also include getting the flavor and effects that your looking for in your vapor. I like to vape a bit higher temp than some because I find a higher vape temp provides for a more sedative body high for my needs.
I also have two cords for my current nano. Same nano, yet one cord needs to be set a half step higher than the other cord to get the same temp.
ataxian
PALE BLUE DOT
I know my asset medicated NANO experience doesn’t counts however I’m F-up?
I must add to my comments: life is much better when a NANO is vaping U!
Last edited: