E-Nano from Epickai

[FlyingLow]

It's a stunner... I'd looks like it's the end result of this blank to me:

#snappoforwood
check for more exotics this week. These are sold. Supplied by Snappo.
#prettierinperson

Whoa! That looks like mine!!!

I have been out of town, but thrilled to come home to these pics!
Shipping info has been received and it is currently in transit; this is a long time coming.

 

[hoyo77]

Whoa! That looks like mine!!!

I have been out of town, but thrilled to come home to these pics!
Shipping info has been received and it is currently in transit; this is a long time coming.

Hey ah...since i am in the ATL area and you are in the ATL area....i volunteer to help you break it in when you get it!!!! lololololol

 

[FlyingLow]

Deal!

@hoyo~ I have been going through some shit and meaning to get together!
I started a new job this week and things are finally falling into place; looking forward to finally getting together.

 

[hoyo77]

Deal!

@hoyo~ I have been going through some shit and meaning to get together!
I started a new job this week and things are finally falling into place; looking forward to finally getting together.

damn I am in the same boat man..started a new job last week. once I get back situated I am going to add a nano to my log collection.

 

[Caligula]

And the family keeps growing...

 

[Crinkled Salmon]

Question time;
Has anyone done mods to their temp dial? (aesthetically speaking)
seeking guidance.
I'd like to take off the plastic housing & make a wooden version, though I'm a bit of a noob when it comes to electronics.

I thought coming here would be a good option, anyone?

 

[Delta3DStudios]

Question time;
Has anyone done mods to their temp dial? (aesthetically speaking)
seeking guidance.
I'd like to take off the plastic housing & make a wooden version, though I'm a bit of a noob when it comes to electronics.

I thought coming here would be a good option, anyone?

Want a 3d printed wood composite shell? Easily done.....

 

[FlyingLow]

I have only seen a couple of pics of mine, but I don't think I really want anything distracting from the beautiful wood.

However, I could see using a 3D printed sleeve to protect the wood while traveling... hmmmm.

 

[Gray Area]

@FlyingLow I think @Ratchett meant a shell for the temp/power dial that's on the cord (feel free to correct me if I'm wrong )...

Btw, your nano is sweet. It really kept the pattern of the wood after working. Nice one

 

[FlyingLow]

Ahhh. That makes much more sense when I reread the above posts; thanks!
(good idea too!)

 

[Jahannum]

@ACE OF VAPE Thank You for this masterpiece!

Poor lighting and a crappy camera, so it is not as magnificient as it is in person.

@Snappo Thank you for the Big Leaf Maple Burl!!!! I really love how the blank turned out! I see lots of faces in the wood, kinda like a bunch of screaming hellish souls, really like the way it looks.

Aside from being a very pretty work of art, she is noticeably smoother to the touch and a bit heavier, almost like an amazingly soft gem stone. It is pleasant to hold.

My overall first impression.

 

[FlyingLow]

I got notice mine is out for delivery!!!

I also got the big leaf, and think yours looks stunning!

 

[Liberty]

Bone dry. I am suspecting there may be slight temperature variances from enano to enano. From reading others post people speak of discomfort running higher heat settings in the 7 to 8 range for dry stem. I am curious because 8 on the dial is my high end and 7 my low for dry stem and I don't find it uncomfortable and never burning. If I am running the enano for a extended session I always end up on 7. Just curious about other enano users experiences. Again, this is not a problem but a curiosity.

Of course to really answer this you would have to have more than one enano to compare or really know the electronics to explain possible temperature variances between enanos.

Finding your temps on the enano is like setting the sights on a rifle. It will be a bit different for everyone.

I think you're exactly right. And, you're temperatures are close to mine. For dry with the stem, I like to start at 6 and work up to 7.5. For the bong with water, I like to keep it between 7-8 and push the basket screen closer for more extraction.

 

[Seren]

That's one GORGEOUS E-Nano you have there @Jahannum

 

[FlyingLow]

I am so stoked!

I just unboxed my piece and she is a beaut!
Just plugged in, heated up, and got down with the GonG with glass screen, and a dry stem.

Very satisfied, and impressed without even having been through the learning curve. Dry is far beyond my expectations.

It is much smaller than I imagined, which was just perfect as it just barely fit on my preferred bub.

It is so very discrete out in the living room, one would hardly notice it when it is not plugged in.

Loving this!



@ACE OF VAPE

Another thanks to SNAPPO for setting me up with this beautiful specimen, this would not have happened without ya brother! You posts, pictures and messages brought me off the fence and got me into the game!

 

[Caligula]

Looks amazing. Welcome to the family!

 

[weenstoned]

Those beautiful maple nanos make me antsy for my teak nano to arrive.

 

[Crinkled Salmon]

Want a 3d printed wood composite shell? Easily done.....

sound's legit, do you have any pics? I have a cherry unit, so something along that color scheme would be awesome, thanks!

 

[Caligula]

Those beautiful maple nanos make me antsy for my teak nano to arrive.

You got teak? SWEET! I need to see pics of it when you get it.

 

[weenstoned]

You got teak? SWEET! I need to see pics of it when you get it.

You better believe there will be pics.

Also shout out to @ACE OF VAPE for replying to my e-mails quickly. Expect I should receive it sometime next week.

Got a claisen adapter and a dhgate order set to arrive next week as well, excuse me while I refresh the Canada Post tracking app like mad.

 

[Caligula]

 

[vaplen]

Every now and then I read someone complaining about the nano being too hot or harsh. Check out this guy on youtube. He reminds me of how smooth the nano actually is (not bashing this guy. i find his videos entertaining but I cringe at some of the videos he does lol)

EDIT: I tried getting the video to start at a certain time but it didn't work go to 11:10 to skip straight to it

 

[Gray Area]

Those beautiful maple nanos make me antsy for my teak nano to arrive.

Tell me about it, mine was shipped at the same time as those that everyone's receiving now (it might even have been the first unit in the line up that Andy posted as I got an Amboyna Burl blank) - only mine has to make it across to the UK before I can play
Come on mr postman...

 

[Caligula]

Every now and then I read someone complaining about the nano being too hot or harsh. Check out this guy on youtube. He reminds me of how smooth the nano actually is (not bashing this guy. i find his videos entertaining but I cringe at some of the videos he does lol)

EDIT: I tried getting the video to start at a certain time but it didn't work go to 11:10 to skip straight to it

That's the same idiot who posted videos about how butane is safe to smoke and how he dabs unpurged BHO.

MENSA material right there.

 

[beach bum]

Ok...VAS has struck. I've been holding out, trying to control VAS but we all know that familiar tug (oh hell, this was a full blown yank!). Having had multiple PDs, a MZ, and a CRZ, I know the logs speak to me.

I read all 299 pages. I've stalked @ACE OF VAPE 's website. I've drooled over @Snappo 's blanks. I've been fascinated watching @Caligula 's vids. Let's face it, I'm hopelessly hooked.

Suppose it's time to send a PM. Snappo, you out there? Hope to chat with you about some wood, man!