I was lucky enough to get in on the early, early bird on indiegogo... What I could bit figure out is how I could add a second peek like a two-fer, or an oil cap without doing a full second order... Or do I need to do each one as a separate deal? I'd like to add a second herbal unit at least, maybe an herb and an oil cap.
Dynavap VapCap
- Thread starter Fenton Mewley
- Start date
Something I forgot to mention.
Here is a diagram of both units. One of the really cool features of the VapCap is "The Tube." The tube directs the airflow from the air/vapor control port to the front of the VapCap where it extracts the vapor from the chamber as it turns 180 degrees and enters the tube. The tube will also condense a little oil as the VapCap is used. This is basically pure Dab.
Here is a diagram of both units. One of the really cool features of the VapCap is "The Tube." The tube directs the airflow from the air/vapor control port to the front of the VapCap where it extracts the vapor from the chamber as it turns 180 degrees and enters the tube. The tube will also condense a little oil as the VapCap is used. This is basically pure Dab.
dude, i hate to be the guy but its the third time it irritates my mindSomething I forgot to mention.
Here is a diagram of both units. One of the really cool features of the VapCap is "The Tube." The tube directs the airflow from the air/vapor control port to the front of the VapCap where it extracts the vapor from the chamber as it turns 180 degrees and enters the tube. The tube will also condense a little oil as the VapCap is used. This is basically pure Dab.
The Cap (Exothermal heat exchanger / temperature indicator) with integrated extractor
The Body (Extraction chamber with diffuser disc
no offense, just perfecting things
cool vape btw!
Like this. It is a bit crude yet, just made it today. Anyone interested in a bamboo vaporizer?
1_gr8_underdog
Trapped in the Astral Planes Back from the dead
Bamboo you say... yes I think I would like that. I caved and ordered a pyro as well.
Versatility is important. Once a way was found to allow use of nearly any heat source, the next task was how to make this little device work across as many platforms as possible. I hope to have a gong adapter available very soon, as well as just the business ends available for integration by the glass guys and anyone else looking to mod a smoking device into this century.
Thank you everyone for your support! I have had more contributions to my campaign from this forum so far than almost every other source.
Cheers
George
Thank you everyone for your support! I have had more contributions to my campaign from this forum so far than almost every other source.
Cheers
George
Well you won me over! I'll jump on board in the next couple days. How do you think this would go with matches? I loved smoking my dugouts, pipes and blunts with matches when I get the chance, but obviously they don't require as much heating. I can see a couple of these on the coffee table, candle as a constant heat source 4am with a few good mates after a big night!
Matches may be a bit challenging. It will probably take 2 for the cold start. A candle on the other hand works nicely if you're not in a hurry. Those alcohol burners from school are also nice for group use.
IAmKrazy2
Darth Vapor
I also ordered a Pyro. What the hell. Cheap way to use e cig juice or whatever it is called for the very rare occasion i might wish to do so. Or... will the Pyro work for concentrates?
@VapCap
Can the Pyro be filled, used, then put away without fear of spilling? Or is it filled each time one uses it?
Can either product be used easily with concentrates and can it be filled ahead of time without worry of leakage?
Does it float or sink in water and would there be any concern if it gets wet? Thanks.
@VapCap
Can the Pyro be filled, used, then put away without fear of spilling? Or is it filled each time one uses it?
Can either product be used easily with concentrates and can it be filled ahead of time without worry of leakage?
Does it float or sink in water and would there be any concern if it gets wet? Thanks.
Last edited:
Seren
Away with the fairies
Like this. It is a bit crude yet, just made it today. Anyone interested in a bamboo vaporizer?
Awesome!
Now you're talking!
VapCap ordered - for $30 shipped to the UK it would be rude not to!
Indeed @Seren, I'm with you on that
I got in on this a few daze ago and I genuinely wish @VapCap the very best of luck, even though at $20 I'm just in it for shitz ñ gigglez
I love my butane vapes so I'm thinking this looks quite interesting and might be fun to have a little play with, plus it's at a price point where I'm happy enough to show some support.
It really looks sooo diddy. It's a shame in use the heating procedure will eliminate a certain element of stealth, but there are often ways & means when out in the 'field'.
But, a rechargeable portable heating sleeve would be awesome!
Bamboo looks good, very traditional. How about some exotic hardwoods plz?
(see @Snappo)
I got in on this a few daze ago and I genuinely wish @VapCap the very best of luck, even though at $20 I'm just in it for shitz ñ gigglez
I love my butane vapes so I'm thinking this looks quite interesting and might be fun to have a little play with, plus it's at a price point where I'm happy enough to show some support.
It really looks sooo diddy. It's a shame in use the heating procedure will eliminate a certain element of stealth, but there are often ways & means when out in the 'field'.
But, a rechargeable portable heating sleeve would be awesome!
Bamboo looks good, very traditional. How about some exotic hardwoods plz?
(see @Snappo)
Seren
Away with the fairies
It's simplicity really appeals to me @VegNVape - I'm really looking forward to having a play too.... &
you know how much I like hardwood!
Someone mentioned earlier in the thread that this vaporiser has the potential to be an awesome holiday option - I think it could be just perfect for that. We'll see I guess!
you know how much I like hardwood!
Someone mentioned earlier in the thread that this vaporiser has the potential to be an awesome holiday option - I think it could be just perfect for that. We'll see I guess!
Cjisohsocool
Well-Known Member
VAPEHUNTER
Well-Known Member
I think he meant that he has received 38% of his target funding.
Cjisohsocool
Well-Known Member
Just re read the email, they got 38% of the cases not the vaps. Silly me 
Well, a girl wants what a girl wants. And who would deny you that? Not I!
Bring on the hardwood!!!
(Er, if that's alright with you of course Mr. @VapCap)
38% funded, Sorry about the confusion. After seeing the campaign beginning to fund well, I ordered the tubes and the glass already. I will be fabricating as much as I can over the upcoming weeks. I hope to begin shipping very quickly after the campaign ends. First come first serve of course. I am thrilled by the positive response so far, and it motivates me to get these things out the door quickly. I hope to work with Ed's TNT to offer some wood units too. Thank you Adobewan, for the suggestion!
Cheers,
George
IAmKrazy2
Darth Vapor
I am planning on attending the Michigan 2015 Cannabis Cup August 22nd or 23rd. Sounds like Dynavap will be there with demo units. Looking forward to trying, and maybe using the Pyro with concentrates.
I also started a thread specific for the event in The Vapor lounge to not clog up this thread.
I also started a thread specific for the event in The Vapor lounge to not clog up this thread.
Mister G
Deceptively Old Fart
Haven't posted in this thread yet, but I went in for the VapCap way back when it was $10+$5 shipping. Seemed like an unrefuseable offer. This thing has a lot of intriguing pluses going for it, size, speed, cost, flexibility, analog... Does it come with the case pictured, and why is it so much taller than the unit?
Bamboo or an Ed stem seems match made in heaven for this design. But maybe it would remind me of a Chinese knockoff of the Okin
Lastly, I wonder how harsh the vapor might be? Short path and all, I know the tube and stuff have some science going in there but does it cool the output well?
Bamboo or an Ed stem seems match made in heaven for this design. But maybe it would remind me of a Chinese knockoff of the Okin
Lastly, I wonder how harsh the vapor might be? Short path and all, I know the tube and stuff have some science going in there but does it cool the output well?
Last edited: