Tried that .not to be weird or anything but have any of you tried vaping tobacco in one of these?
i think that if i'm out and about, i'd have a bit of tobacco on me to fool any spies trying to keep me and my beloved weed apart!
and i might enjoy it as i vape nicotine (low dose .03)
Greetings!
The past few weeks have been rather intense here, and it gave all of us an opportunity to really push ourselves and see what is possible. With the launch of the M and then the 420 sale right after it, April challenged all of our skills, systems and endurance.Thank you everyone for this most awesome challenge.
Now since we are finally getting caught up and more back on schedule, I was able to get a few videos put together to address a few items there may have been a bit of confusion over.
This one goes over the modularity of the M relative to the rest of the Dynavap V.A.S. Vapcap Accessory System.
This one is specific to the few non-modular components of the M.
In addition to this we have reworked the Ti tip. This is not a major upgrade performance wise, but it does continue the evolution and intent of the Ti tip.
Here it is...
First thing, is the reduction of the fins from 7 to 5. This is partially in response to a few comments regarding material getting stuck in the tight clearance between the fins, but more importantly (thank you Jason) it allows us to further reduce the mass where it isn't really needed. This may not seem like much, but with a bit of engineering and reconfiguration, we were able to reduce the total mass by almost 20%.
So the new tip now weighs just a few milligrams more with the cap on as the last tip did with the cap off.
What does this mean? When holding one of our devices with the new tip, it feels a bit more balanced as the center of gravity is shifted more towards the mouthpiece.
We didn't remove much more material from the extraction chamber, so this model should still heat and cool very similarly to the previous 7 fin version.
Onto some other news, the all titanium Omnivap is scheduled for a return around the end of this month. It will reappear with a new and exciting member of the family. The Omnivap XL. Pictures coming soon.
On our website, we are also working on adding more items to the Dynabuilder, and adding some more shipping options. For the shipping, we will be adding DHL as a faster option for our international customers.
In addition, we will have a selection for non-green packaging if anyone would want that. ??
If non-green packaging is desired now, before we get the option integrated, just leave us a note when you check out. We have always had plain packaging available for those special circumstances (like a birthday surprise) it will just be easier to select it once we have the option live.
So as we get back into our groove here at the VapLab it is with much appreciation and gratitude.
Thank you for this! We love what we do, and with your support we will continue to innovate and improve our products.
Cheers,
George
not to be weird or anything but have any of you tried vaping tobacco in one of these?
i think that if i'm out and about, i'd have a bit of tobacco on me to fool any spies trying to keep me and my beloved weed apart!
and i might enjoy it as i vape nicotine (low dose .03)
I like the way tobacco smells, and I like the way it tastes. Even vaporized. And I occasionally make a spliff with the vapcap.Tried that .
Tried both cigarette rolling tobacco and pipe tobacco .
At both cases I got to "enjoy" the real taste of dried and cured tobacco leaves ,
with all those subtle aromas that you do not get the chance to sense if instead you 'd smoked the tobacco .
Do you really want to know how it tasted ?
My hard guess is worse than shit ,since never tasted actual shit.
But shit can't be as bad as tobacco is.
Pretty sure about that .
Surprisingly, maybe, the Ti bowl is 1-2mm deeper than the SS; after experimentation, I no longer "pack" my bowls, but just fill them.
Hearing about the modifications to the Ti, makes me wish the Ti tip I just got had the 5 fins (love to compare and contrast), but it has 7...for a total count of 3 SS and 2 7-fin Ti tips.I have to say I like the looks of the 7-finned tip more and it was a nice detail to distinguish between the entry-level "M" tip and the premium Ti one.
I would prefer to see some rework be done inside the Ti tip's bowl with an extra lip for the screen to catch better and not moving around so much.
pull the cap off the tip, the tip off the body, the condenser from the body, and soak then for 5-10 minutes in ISO or ethanol or...well, let's leave it at that!
.Nothing's 'missing' from the M: think of it as the utility vehicle (Unis as sedans, Omni as high-performance).
Agree in detail: fucking combustion is a matter of more than one vegetable. My lungs can no longer stand a cigarette, but there's that part of me that really only wants that first puff, anyway...and it certainly doesn't take a bowlful, either.not to be weird or anything but have any of you tried vaping tobacco in one of these?
i think that if i'm out and about, i'd have a bit of tobacco on me to fool any spies trying to keep me and my beloved weed apart!
and i might enjoy it as i vape nicotine (low dose .03)
Personally I would call this overkill. I completely understand the interest in avoiding metal dust and machine oil and I like to avoid it too. But it isn't like these guys are caked in grease or anything. I am not going to discourage anyone from cleaning as much as they think they need to, but for most folks (like myself) this is more than is necessary. I would hate to discourage anyone who thought this might be actually critical or that it is truly unsafe not to go this far and push them away. I frankly think a swab out of the tip and the condenser with an ISO soaked Q Tip would really be all that is necessary. YMMV, of course.pull the cap off the tip, the tip off the body, the condenser from the body, and soak then for 5-10 minutes in ISO or ethanol or...well, let's leave it at that!
Get a bristle pipe cleaner, bend it 2" from the end & use that part to scrub the inside of the ISO-wet condenser from both ends, and the condenser-end of the tip; soak for another few minutes, repeat scrub, and rinse. Scrub the inside of the condenser once more with soapy water this time, rinse thoroughly and let dry.
If you want, swab out the bowl w/ an ISO-wet q-tip, then rinse, wash, and dry. I wash the inside of a new cap before first use, too, but that's just me. Don't scrub the o-rings, and no need to pop the screen out at all.
On 12th April I watched a video on the ‘M’ & Pre-ordered from Vape Piranha UK.
On 14th April I discovered the Dynavap sale and ordered the Ti-Woody + spares.
Today they both Arrived!!
Still playing around on how to use them. Only got single flames right now with a double on order. I’m sure I’ll eventually work out my preferred method, but I’m getting damn pretty high while experimenting.
My initial reactions are. . that I like blocking the carb with the 2nd O-ring, I prefer the Ti-Woody’s light weight body, & I much prefer the Ti-Tip.. . .
Some pictures (everyone likes pictures
upload image gif
One question! Any one got any idea why my dynacaps only attract to the edges of my magnets and not the centre? Obviously I used the wrong type of magnet . . but I haven’t googled this as of yet . . .
I’m also going to mention that my Ti-Woody body had a bit of a serious problem on arrival. The opening at the collared end where the tip inserts was not big enough. I could barely force the tip into the body or pull it out, regardless of lubrication levels. Both required EXTREME force and getting it in was almost impossible. And honestly, the o-rings would not have lasted more than 2or3 assembly/disassembly with that level of stress and friction. . . .
So I had to roll up a small piece of 240grit sandpaper put it in a drill and use it to open & smooth out the hole. Took me ages, because I went SLOW not wanting to make it too big. . . . Now it slides in & out perfect. .
Thanks to all the contributors here. From Vapcap care to butane filtration I’ve learnt a lot!
Have not had your experience of charring tobacco, but vaping it IS more intense, for a fact. I wouldn't do it, otherwise.
I quite agree - but if someone wants to be sure, and can't feel safe short of "taking measures", that's a CERTIFIED path to being sure...and probably a lot less than some feel a need for (dismantling completely, 24-hour ISO soaks, etc).
The M tip and Condenser are compatible with other stems and bodies in the Dynavap line up. You would be able to swap into a wood stem anytime.
Very nice, seems like u got quite a little collection
I'm a just in case kind of guy, I have a M and a short condenser just in case my carpal tunnels and Mallot finger goes awayGot the major bases covered.
No M for me. This last M is going to my Brother in law.
Got to try and pace myself with this Omni.
. Others may see it as a manifestation of VAS
Actually, the video shows that the m can be used with other bodies no tape needed.
arrrrgh! tracking says it will be here today but it was in another state just a few hours ago so hopefully tomorrow.
i have about 8 genetics ready and waiting for experimentation. i ran out of shatter but that can be easily remedied.
I have been able to do more thorough tests ... my training with the vaponic allows me to stop giving heat and the second or two to hear the click .... that was my previous mistake .. it stopped being hot when I clicked and brushed the Combustion .. surprised by the taste very close to being pure and its great efficiency..More thoughts to come
Dynavap tube + Cap puller. There is a magnet inside the silicone end that is visibly wedged over the bottom of the tube.
e 
Broke camp and left a few improvements on the existing ring. Otherwise left no trace.
