TheVaporist

Man is a universe within himself
This time, my @VapCap Quick Pic of the week will be focused on Burl, with a picture as sharp as a knife.

IMG_5223.jpg

(The picture was shot with a 35mm f11 with 4sec exposure, 100 iso a beer and an Omnivap in hands, making things difficult ahah)

@emmdeemo, this times the depth of field is huge but I hope that you and others fellow photographers will like those numbers, and others vapcapers will like the picture!:rofl:

A loud 'cap to all of you! :science:
 
Last edited:

EmDeemo

ACCOUNT INACTIVE
This time, the @VapCap Quick Pic of the week will be focused on Burl, with a picture as sharp as a knife.

IMG_5223.jpg

(The picture was shot with a 35mm f11 with 4sec exposure, 100 iso a beer and an Omnivap in hands, making things difficult)

@emmdeemo, this times the depth of field is huge but I hope that you and others fellow photographers will like those numbers, and others vapcapers will like the picture!:rofl:

A loud 'cap to all of you! :science:

I approve, very much!

Get that iso down even further, up the available light! ;) (everyone is a fuckin' critic! :p)
 

SSVUN~YAH

You Must Unlearn, What You Have Learned...
Greetings VC'ers! I'm currently in the process of ordering a Bocote G2M2 Stash, Coco OV, and 2 personalized caps. My question is, does anyone already have a yin-yang symbol digitized through DynaVap? I can tell they are a very busy crew up in Wisconsin. TIA!
This time, my @VapCap Quick Pic of the week will be focused on Burl, with a picture as sharp as a knife.

IMG_5223.jpg

(The picture was shot with a 35mm f11 with 4sec exposure, 100 iso a beer and an Omnivap in hands, making things difficult ahah)

@emmdeemo, this times the depth of field is huge but I hope that you and others fellow photographers will like those numbers, and others vapcapers will like the picture!:rofl:

A loud 'cap to all of you! :science:
I'll click to that! :clap:
 

almost there

Well-Known Member
Greetings VC'ers! I'm currently in the process of ordering a Bocote G2M2 Stash, Coco OV, and 2 personalized caps. My question is, does anyone already have a yin-yang symbol digitized through DynaVap? I can tell they are a very busy crew up in Wisconsin. TIA!

I'll click to that! :clap:
Please post a photo of that G2M2 stash whenever u receive it, I'm so curious how that will look. I had wanted that setup for an XL stash but I just can't visualize it enough to determine if it's too cluttered. I don't currently own any stashes so I have no real way to see how much space is between all the magnets and silicone containers. Those omni's must be something else @SSVUN~YAH, didn't you just beat me to that burl omni a few days ago:hmm:?
 

SSVUN~YAH

You Must Unlearn, What You Have Learned...
Please post a photo of that G2M2 stash whenever u receive it, I'm so curious how that will look. I had wanted that setup for an XL stash but I just can't visualize it enough to determine if it's too cluttered. I don't currently own any stashes so I have no real way to see how much space is between all the magnets and silicone containers. Those omni's must be something else @SSVUN~YAH, didn't you just beat me to that burl omni a few days ago:hmm:?
Definitely will post! Yeah, I couldn't believe it lasted as long as it did on classifieds. So grateful for @VoodooChild as well as the whole DynaVap crew!
 
Last edited:

mucsusn

60 going on 20
This time, my @VapCap Quick Pic of the week will be focused on Burl, with a picture as sharp as a knife.

IMG_5223.jpg

(The picture was shot with a 35mm f11 with 4sec exposure, 100 iso a beer and an Omnivap in hands, making things difficult ahah)

@emmdeemo, this times the depth of field is huge but I hope that you and others fellow photographers will like those numbers, and others vapcapers will like the picture!:rofl:

A loud 'cap to all of you! :science:
That, my friend, is vape porn at its' finest!
 

Shannock

Well-Known Member
What is my problem?
I hate wood against my lips?
Many like wood so please ignore my dislike for wooden mouthpieces?

@lazylathe do you have a VCAP?
It's my next I think?
Waiting for your thoughts?

I want to go back to JOINTS however they taste bad now?

Will a 510 drip tip fit?

@ataxian Omnivaps have Ti tips and spinning Ti tips are now available in place of the wooden tips. You can also have a Ti glassy with no mouthpiece but you know all about glass!

I too think some wood on my lips is...UNCIVILISED however I have a Ti Vong in Blackwood and the wood is so hard and dense it is not a problem to me but that is of course personal taste.

Whatever choice I think a VapCap is the nearest thing to a Joint without smoke.

:peace:
 

natural farmer

Well-Known Member
Greetings VC'ers! I'm currently in the process of ordering a Bocote G2M2 Stash, Coco OV, and 2 personalized caps. My question is, does anyone already have a yin-yang symbol digitized through DynaVap? I can tell they are a very busy crew up in Wisconsin. TIA!

I hope my new Ti Omnivap with a Yin-Yang decorated cap waits for me in the mailbox tomorrow... Or the day after... Or the next one... That will save you some pennies, right? ;)

Upgrading from a standard woody to a omnivap.

Is it possible to cut the woody stem down to a body size. Anyone had any luck with this?
Wouldn't be that hard with a fine-toothed saw, would it?
 
Last edited:

almost there

Well-Known Member
G2 two magnet Wenge stash with slight filter.
It's the favourite of my stashes.
That is certainly very handy but if 2 silicone holes were to be added I can't see how placement space would possibly allow for that, will the stash compartment be made shorter you think? Haha, nevermind I figured out my mistake, I was thinking 2 magnets and 2 silicone holders but G2 means garage for 2 vapcaps. Sorry for all the confusion, I don't think so straight without my meds:doh:
 
Last edited:
almost there,
  • Like
Reactions: SSVUN~YAH

Squiby

Well-Known Member
Is it possible to cut the woody stem down to a body size. Anyone had any luck with this?
It's possible and a few people have posted about it. Why not just keep your stem and get a spare body? Bodies come stock with a double crown. Then you can save the stem for a rainy day or when you get bored and want to change outfits.

When will people stop reposting this absolutely stunning picture? :love:

spinning Ti tips are now available in place of the wooden tips.
I think you mean mouthpieces...:rolleyes:
 

herbalist33

Well-Known Member
Upgrading from a standard woody to a omnivap.

Is it possible to cut the woody stem down to a body size. Anyone had any luck with this?

Yep, I cut down a cocobolo stem down to an omni body size. I would only attempt it if you have a spare metal crown that you can put over the end once you've cut it down. I used a crappy saw on a Swiss Army knife- it did the job, but caused a couple crack along the grains. The metal crown helps to strengthen it up.

I would think if you wanted to you could probably just sand it down to the right length, which is probably what I would do if I were to do it again.

Peace
 

snamuh

ghost
@ataxian Omnivaps have Ti tips and spinning Ti tips are now available in place of the wooden tips. You can also have a Ti glassy with no mouthpiece but you know all about glass!

I too think some wood on my lips is...UNCIVILISED however I have a Ti Vong in Blackwood and the wood is so hard and dense it is not a problem to me but that is of course personal taste.

Whatever choice I think a VapCap is the nearest thing to a Joint without smoke.

:peace:
Spinning Ti MP are not available AFAIK.
 

Chose

Well-Known Member
When I woke up this morning, my vapcap is no longer considered illegal paraphernalia! I am no longer considered a criminal. It's like a weight has been lifted off my shoulders. Have a great day everyone!

https://www.google.com/amp/www.weednews.co/marijuana-is-officially-legal-in-maine/amp/
Wow that must feel great to finally be free to live your life as you want
Without being judged and branded a criminal for your preference to a herb a healing herb that the whole world should be able to enjoy if they so wish
Enjoy this day it must feel like Christmas :tup:
 

lazylathe

Almost there...
What is my problem?
I hate wood against my lips?
Many like wood so please ignore my dislike for wooden mouthpieces?

@lazylathe do you have a VCAP?
It's my next I think?
Waiting for your thoughts?

I want to go back to JOINTS however they taste bad now?

Will a 510 drip tip fit?

I do have a VapCap and a Ti Woody VapCap, both no longer used and in a drawer...
For me they were too inconsistent and i do not have the time or patience at the moment to experiment with them. I did manage to break the thin glass tube in my original, so it is out of commission...

The Ti Woody is nice but it is a butane vape not meant for me i think.
At present i am using high temps for max extraction in my vapes and the VapCap cannot keep up without combustion. My Sublimator, Supreme V3, Mighty and my newly repaired Cloud+ are doing a fine job at the moment.

When i do get it to work correctly it is pretty good and clouds are quite large.
Unfortunately i am a huge cloud chaser and love to get all my meds in one hit, if possible.
I am also looking for vapes with accurate temp control for easily repeatable results, so a lot of butane vapes are pout for the moment.
If my medical situation eases up soon, i will try them again!
 

antiksink

Rouge Warrior
Upgrading from a standard woody to a omnivap.

Is it possible to cut the woody stem down to a body size. Anyone had any luck with this?

An option would be to order the XL Omni Condenser. You just have to email them about it. This is what I did.
I ordered an XLS Blackwood Vong which comes with a wood stem same length as the woody and the XL Omni fits right in.
I got the Ti-Glassy for this purpose to convert it to a glass XL Omni but the glass broke as soon as I sat down to look at it for the first time. I resolved that issue by making a stem out of carbon fiber. So all in all ended up with two nice pieces.

(Here you can see the XL Omni beside the reg condenser)

20170128_134534.jpg
 

Squiby

Well-Known Member
if 2 silicone holes were to be added I can't see how placement space would possibly allow for that, will the stash compartment be made shorter you think?

There is no stash compartment in a two garage Dynastash. The spot usually reserved for the stash is drilled out the full length to accommodate a second Vapcap.

If you want a custom Dynastash with two Vapcap storage spaces, two magnets and two concentrate containers, it will need to be larger than both a regular or an XL Dynastash. The two Vapcap compartments will take up the entire length of the stash. It would likely need to be about an inch and a half longer to add those concentrate containers. I guess you would call it a DynastashER2 G2 M2.

The stock DynastashER has room for the concentrate container because the stash compartment is shallower than the Vapcap compartment.

If I were you, I would get two regular DynastadhERs. Then you have storage for a Vapcap, herb stash and the concentrate container for each one. You could have two magnets on each without adjusting the size.

Spinning Ti MP are not available AFAIK.

Is George not offering these anymore?

http://fuckcombustion.com/threads/dynavap-vapcap.18853/page-391#post-1066464
 

FlyingLow

Team NO SLEEP!
I got my omni and replacement body for my og ti-woody.

Already having a great experience with the new omni, it is AWESOME. Quick question, i prefer the omni twisted all the way open with the least restricted airflow possible. When twisting open, it creates a small gap between the body and the mouthpiece. Should i leave the gap while vaping, or push the whole body back snug together? With the body pushed back against the mouthpiece, it places the spacer right shy of the carb hole.
 

mucsusn

60 going on 20
I got my omni and replacement body for my og ti-woody.

Already having a great experience with the new omni, it is AWESOME. Quick question, i prefer the omni twisted all the way open with the least restricted airflow possible. When twisting open, it creates a small gap between the body and the mouthpiece. Should i leave the gap while vaping, or push the whole body back snug together? With the body pushed back against the mouthpiece, it places the spacer right shy of the carb hole.
The mp and body should stay together, the condenser inside is what needs to move.
 

ataxian

PALE BLUE DOT
I asked for one about 2 weeks ago and they said "...We still only have the one made and there are a few more priorities at the moment before we can get to a new custom accessory."
I'm glad George is doing well!

@lazylathe is like me with a medical condition.
I wish I was RECREATIONAL so I could have fun and party!

Since being MEDICAL is no joke I have tobe careful.

I wish I could be a STONER and paint a bus like a HIPPY with flowers, rasta colors and peace signs!

I forgot Black T-Shirts.

CANNABIS is a life saver and makes you CIVILIZED!

CANNABIS has been HIJACKED like politics on the world stage!
 

lazylathe

Almost there...
I'm glad George is doing well!

@lazylathe is like me with a medical condition.
I wish I was RECREATIONAL so I could have fun and party!

Since being MEDICAL is no joke I have tobe careful.

I wish I could be a STONER and paint a bus like a HIPPY with flowers, rasta colors and peace signs!

I forgot Black T-Shirts.

CANNABIS is a life saver and makes you CIVILIZED!

CANNABIS has been HIJACKED like politics on the world stage!

After writing that post i hit my Ti Woody!
Awesome as always but it lacks the knockout punch i need these days.
I would imagine using it more as a during the day on a weekend type vape where i still need to function and alleviate pain.

I am hoping to finally rid my life of a lot of work stress, so may be revisiting this later when tolerance is rock bottom again!
 

ataxian

PALE BLUE DOT
After writing that post i hit my Ti Woody!
Awesome as always but it lacks the knockout punch i need these days.
I would imagine using it more as a during the day on a weekend type vape where i still need to function and alleviate pain.

I am hoping to finally rid my life of a lot of work stress, so may be revisiting this later when tolerance is rock bottom again!
I was a sipper when I started medicating for my condition. Lately I want to just SMOKE a JOINT like back in the day!

My wife who is beautiful and fit physically took my LOTUS (I loved it!).
She doesn't use CANNABIS like me? (she makes $ and lets me medicate)

The VCAP I think I could hidefrom her?
JOINTS don't taste good?
EVEN with excellent COLAS?

My vaporizers she accepts and thinks I'm CIVILIZED?

Maybe I'm PUSSY WHIPPED?

Sorry SJW's?

PC behavior I never learned!
 
Top Bottom