tried to vape some roobios and stuff.
the draw restriction is weird.
IMHO, VapCaps are not ideal for sipping on aromatic herbs - I prefer to use a session vape (the DaVinci Ascent) at lowish temperatures on the rare occasions I feel the need to vape some mint. I have never wanted or expected big clouds from these herbs and I believe the VapCap is optimized for marijuana useSo I can get a nice taste out of chamomille for maybe 3 seconds
@WarpaintFree - herbal vapes are most efficient with dry, cured bud and if I ever get bud that is not quite ripe I put it in my dynastash overnight and next day I'm blowing clouds!Does anyone have the dimensions of the herb chamber in a Dynastash? My cedar one dries out bud so hard and fast it's crazy - like dry as dust in a matter of hours. I'm thinking of trying one of those keychain pill/toothpick holders to store the bud, and I'd like to get the biggest one I can find that will fit. My digital calipers are buried in storage, so if someone could tell me the depth and narrowest width of that side of the Dynastash, I'd be much obliged.
They don't even presently offer an Omni with a standard body unless it's the TI.
I like my Dynastache just fine, but it's not necessary. get the magnet, find an altoids tin (or 'stache wax tin) and you are good to go.
Heat transfers out via cap/magnet MUCH faster than air-cooling.
and handling hot things thru a kleenex will burn you - or waste kleenex
Does anyone have the dimensions of the herb chamber in a Dynastash? My cedar one dries out bud so hard and fast it's crazy - like dry as dust in a matter of hours. I'm thinking of trying one of those keychain pill/toothpick holders to store the bud, and I'd like to get the biggest one I can find that will fit. My digital calipers are buried in storage, so if someone could tell me the depth and narrowest width of that side of the Dynastash, I'd be much obliged.
I like that all that about about those cases double as stands and that they are in the ready position once you flip up the door.I think that spring stash is great, but I prefer both the functional design & aesthetics of @Winegums' cases. I like the way in which it opens -- side pull down. I like the way the vc is unveiled while opening. I think it's real vc undressing porn.
Come on, just look at this photo. (They're like little vc coffins. )
Thanks for the pics and the template to work with. There is some chart that was posted with sizes and dimensions of the VCs. So anybody can get creative.The dimension of Dynastash XL: 128mm x 51mm x 20mm thk.
Herb Chamber: approximately 20mm x 15mm x 55mm depth
Hiya @Mr.Sifter I saw this and wondered what little thingy was tempting you, I'm assuming it was on the DV site? I'm assuming because you mention no shipping charges to EU, which happens...umm..never? So without the benefit of a link or searching to find whatever thing you're referring to. I'm just wondering.
But I have a problem with your last 2 cautionary lines, I was like WTF? Is he serious?!
The reason why: You have spent days (maybe weeks) turning this decision of yours into a problem for all with all sorts of hypothetical concerns. You have come here repeatedly, seeking reassurrance, to the point that other members are joking with you about it. Many members genuinely gave you their feedback based on experience. Then you finally say "fuck it, I'm out" but we all knew that wasn't happening. So you came to your senses about your grasshopper needing a back-up. Congratulations. I think the Nona was a really good decision. But you have still haven't ever used a VapCap of any model that you have talked about here.
My problem is with your last sentence in particular, the reason it pisses me off is:
That one sentence devalues this thread and Fuck Combustion now & in the future. I'll tell you why:
People who maybe are just beginning to think about fucking combustion (and which device might best suit that goal) will come here. But they won't know you don't know what the fuck you're talking about. The VapCap is (one of) the best for those transitioning. I wouldn't let myself consider a VC for months (well after spending $400 on 2 other vapes) because someone way back last spring got me thinking the torch seemed borderline dangerous. I didn't know she/he didn't know what the fuck they were talking about? But I know you don't, so don't act like you do before you do. When you have something to contribute that is based in fact please, by all means, please share it. Don't turn this thread into Mr.Sifter's Worry Corner.
TRUTH: the heated end of the VC is around 100mm or 4 inches from your face. If you have ever smoked a joint with a friend then you have courted far more danger than you will using a VC. Unlike lighting a joint/ciggy, the open flame is nowhere near your face. A VapCap is one of the safest butane vapes IMO because, since the flame isn't near your face there is no way you're inhaling butane exhaust, unlike all those years I used a pipe & one-hitter. The VapCap is safe for mature adults. YMMV.
@Mr.Sifter keep doing your thing ... .
The o-rings can handle alcohol just fine, but I wouldn't go soaking the tip over night in it. I like using an Isopropanol soaked q-tip to scrub things out.When cleaning my Dynavap can I rinse the tip in Iso with the O-rings On? I always do a hot water rinse after Iso as well.
I can get the o-rings off the condenser but my fingers aren't nimble enough for the ones on the tip.
@Winegums and any dugout enthusiast this was what I was going on about in the video below. I found a video of the dugout with the spring action at my local head shop. And It CLICKS to open. Repeat. IT CLICKS TO OPEN!
If only it fit the VC. The top of the dugout is a wide section and could store smaller extras, etc.
I've seen the slimmer, space saving approach all the FC accessory makers, manufactures, basement tinkerers, modders, etc are going with in your dugout designs. Which is the right design approach IMHO. More pocket size. And being able to store two VCs or a small lighter. Thanks for sharing!
BTW, this is a fast moving thread with a lot of content and pics of eye candy etc. If you are new and/or having trouble getting the knack with your VC, don't hesitate to ask questions here. I was apprehensive and didn't want to deal with breathing butane. Here is more of a visual. If you are using the right technique, you should only be heating the cap in some manner away from your body. Hear the click, bring it toward you to draw. You should only be breathing the air coming into the airpath that is near you presumably. Also check out George's videos.
The o-rings can handle alcohol just fine, but I wouldn't go soaking the tip over night in it. I like using an Isopropanol soaked q-tip to scrub things out.
Currently the full Omni kits available on the site are the TI, the TI XLS, and both the Blackwood and Cocobolo with Vong stems. This is what I ordered, my first experience from Dynavap. Sure I can order other parts. This is not what I did. I added the Omni with Cocobolo Vong stem from their Omni lineup, plus the basic kit and a dynastash . I did not receive the Vong body the same as someone else reported from this thread. See quote below.I don't really understand what you mean by that, as you can switch out the Omni stem w/ any other 62mm stem of your liking, or you can buy an Omni XL condenser & pick 1 of the 5 stems currently sold individually on the DV website & then just add a tip & cap.
so my green envelope showed up today and i was so stoked. Unfortunately my happiness turned to sorrow. I wanted an blackwood OmniVonG and when i went to the Dynavap site i saw there no OmniVonG's listed however, the Blackwood Omnivap in the picture looked like a VonG so i clicked the product description and it said "midsection: 14mm Blackwood NonaVong so i said , that must be it, just changed the name. i ordered it but what came to my house was indeed a blackwood omnivap, the skinny body that is surely not a VonG. i double checked the site and sure enough the OmniVap Blackwood still says "NonaVonG" midsection.