WakeAndVape
VapeLife X
WakeAndVape with 'M'
...i guess I know what it's called now!
Thanks very much for sharing your insight. I totally understand your points. What I meant though- my friend who is disappointed with his FF2, he also has the Herborizer XL, as do I. And he feels the FF2 is a let down in comparison in terms of effect.
I personally find my Omnivap superior in effect to my, especially fullness of effect, compared to my Herborizer. So my feeling is that he would probably be surprised just how effective the Omnivap is, strength wise.
Sure there are different itches to scratch. But he feels that portables will never compete with the medicating power of top desktops.
For me the Omnivap does exactly this, so I am willing to bet it may be a more powerful, and satisfying vaporizer than the FF2.
If anyone can confirm this, it is yet another triumph for the vapcap, and more than justifies the Omni price tag.
The Mworks exactly the same way! If you close your eyes you would know the difference except for a slightly heavier feel to the stainless steel. Folks, everything these guys makes works well!@Gardenerjeff how does the M compare to the various Ti tips? I was planning on grabbing a TiGlassy during the 4/20 sale but this has thrown a spanner in the works!
This thread is too crazy active haha.
Does any Dynastash model fit the Ti Omnivap??
I can't seem to see one that says so.
Does anyone know how fast those o-rings wear out? I messaged info@dynavap.com after I placed my order yesterday about the M as well about adding those o-rings to my order but it seems they are too busy so no response from them.. So it says that my order is already shipped and that means that if I want
SS Condenser O-Ring Kit I will need to pay 13 dollars for shipping again.. Does anyone know the specs of those o-rings or a place where I could order them with free shipping? I am not in US so if there is any o-rings that could be ordered from those chinese e-cig sites would be great, or at least if someone could help me with dimensions of those o-rings so I would know what to look for.
Also does the M come with any spare o-rings or is it just device itself without anything extra? Their site is really confusing and no information available about this..
Just the device. They are in a rush this weekend. Email them again, explain what happened (and ask them precisely what you need), I'm pretty sure they'll find a way to be helpful. VapCap is a choice you wont regret. Welcome to the forum.
If you are careful when disassembling the VC and don't soak the orings in ISO, they should last quite awhile. I have not had to replace any yet.Yeah I contacted them again through their site as well through fc so lets hope I will get some response.. Well at least I did pick those spare screens to go with the device.
Make sure you lube your o-rings during assembly and they shouldn't wear out too quickly. Bees wax is what I would recommend. If it feels difficult or you see the orings popping out of the grooves, stop and apply more wax. The grooves are sharp and can cut the o-rings.Does anyone know how fast those o-rings wear out? I messaged info@dynavap.com after I placed my order yesterday about the M as well about adding those o-rings to my order but it seems they are too busy so no response from them.. So it says that my order is already shipped and that means that if I want
SS Condenser O-Ring Kit I will need to pay 13 dollars for shipping again.. Does anyone know the specs of those o-rings or a place where I could order them with free shipping? I am not in US so if there is any o-rings that could be ordered from those chinese e-cig sites would be great, or at least if someone could help me with dimensions of those o-rings so I would know what to look for.
Also does the M come with any spare o-rings or is it just device itself without anything extra? Their site is really confusing and no information available about this..
@Winegums excellent tip on the teflon tapeMake sure you lube your o-rings during assembly and they shouldn't wear out too quickly. Bees wax is what I would recommend. If it feels difficult or you see the orings popping out of the grooves, stop and apply more wax. The grooves are sharp and can cut the o-rings.
If you're worried about your O-rings in the long term or you have worn out o-rings you can buy teflon tape at a local hardware store and give it a wrap or two. The teflon is extremely slippery and will form an excellent seal. One roll will last you a long long time and can be used to seal up threads that are leaking. I've been using a single wrap on the tip that I use for photos and it makes a huge difference in ease of assembly.
Make sure you lube your o-rings during assembly and they shouldn't wear out too quickly. Bees wax is what I would recommend. If it feels difficult or you see the orings popping out of the grooves, stop and apply more wax. The grooves are sharp and can cut the o-rings.
If you're worried about your O-rings in the long term or you have worn out o-rings you can buy teflon tape at a local hardware store and give it a wrap or two. The teflon is extremely slippery and will form an excellent seal. One roll will last you a long long time and can be used to seal up threads that are leaking. I've been using a single wrap on the tip that I use for photos and it makes a huge difference in ease of assembly.
Thats some hot glass :-o, are u making a lava stem?Ughhh! I was carrying my VC and it exploded!
April fools! This cap bit the dust while I was using it to test the fit with my glass bodies and forgot the glass was hot. Glass blowing that is ...
Lol ... just making bodies like theseThats some hot glass :-o, are u making a lava stem?
And it's pretty much the same story with the DaVinci Ascent and loads of conduction Vapes but today just felt like an Ascent sort of dayFlavor will of course be better with the FF2 at every step of the way,
I would say not to lubricate the OmniVap o-rings on the mouthpiece which slots into the body, otherwise it won't firmly grip the sides of the body and the condenser won't shorten and lengthen while twisting the MP. I think I went wrong there somehow in my early experiments with the OmniVap - All working great nowMake sure you lube your o-rings during assembly and they shouldn't wear out too quickly.
Not yet, I added another M to the cart. These are going to make awesome presents!You may have bagged the last leopard, do you have shipping confirmation yet?
I could be waiting a while for mine... hurryup (jk) !
I can pop into the bathroom and take care of a dose lickity split.
................................The $35 offer that's on this weekend is unbeatable, seriously, a bomb-proof vape for £38 shipped to the UK is a steal.