Dynavap VapCap

natural farmer

natural farmer

Well-Known Member
Tony Timeless said:
Hi guys,


I just wanted to give a little update after reporting that I struggled somehow with my Ti Woody.

I am lucky that I've had no more combustion happening since then and I am able to clear a cap within 3 heating cycles - when I inhale natively / dry.

I've read several pages back on this thread and I would say I know basically all I need to know when it comes to heating techniques or inhaling techniques.

But, still , I am really struggling and I hope maybe got some ideas for me, here?

The ABV comes out nice evenly brown, but I simply feel that I could get out of this vape WAY more.

I tried out how the Woody would perform with my water pipe so I loaded a small amount, but here also: I get vapor, yes, but I am miles away from milking my bubbler, like (for example) my Evo or the GH does.
I saw several videos of vapcaps milking bubblers - or when used natively: vapor-production like if the person was smoking on an e-cigarette with liquid.

Don't get me wrong please:
I really like this little thing. I already LOVE the company - i got a private message answering one of my questions concerning cleaning - how great CS is that?
And i would love to upgrade my Woody to maybe a Woody S or even buy an omnivap .. BUT as long as I am struggling that much I am on the fence a little now.

Could anyone chime in and help me out here ?

What are possible reasons that I am NOT getting thick enough vapor production?
I am using a single flame torch (the Vapman original torch) , I tried several grind consistencies. And right now I am having some nice Pineapple Kush buds. They have been harvested not that long ago and will get better with some time curing that's for sure, but the Evo for example gives me huge clouds with this herb, so I can except the herb being the reason for this weak vapor production. So therefore it must be my heating technique I guess but no matter how I try I don't get the bubbler milking. And therefore it is unfortunately not satisfying for me at the moment. Also dry- as i said, there is vapor, yes. But the hits feel light and I don't get that much of an effect out of it :(
Click to expand...
Have you tried closing the carb hole completely during the draw? How long is your draw? Can you draw until you hear the cooling click?
 
ktmstick

ktmstick

Well-Known Member
Tony Timeless said:
Hi guys,


I just wanted to give a little update after reporting that I struggled somehow with my Ti Woody.

I am lucky that I've had no more combustion happening since then and I am able to clear a cap within 3 heating cycles - when I inhale natively / dry.

I've read several pages back on this thread and I would say I know basically all I need to know when it comes to heating techniques or inhaling techniques.

But, still , I am really struggling and I hope maybe got some ideas for me, here?

The ABV comes out nice evenly brown, but I simply feel that I could get out of this vape WAY more.

I tried out how the Woody would perform with my water pipe so I loaded a small amount, but here also: I get vapor, yes, but I am miles away from milking my bubbler, like (for example) my Evo or the GH does.
I saw several videos of vapcaps milking bubblers - or when used natively: vapor-production like if the person was smoking on an e-cigarette with liquid.

Don't get me wrong please:
I really like this little thing. I already LOVE the company - i got a private message answering one of my questions concerning cleaning - how great CS is that?
And i would love to upgrade my Woody to maybe a Woody S or even buy an omnivap .. BUT as long as I am struggling that much I am on the fence a little now.

Could anyone chime in and help me out here ?

What are possible reasons that I am NOT getting thick enough vapor production?
I am using a single flame torch (the Vapman original torch) , I tried several grind consistencies. And right now I am having some nice Pineapple Kush buds. They have been harvested not that long ago and will get better with some time curing that's for sure, but the Evo for example gives me huge clouds with this herb, so I can except the herb being the reason for this weak vapor production. So therefore it must be my heating technique I guess but no matter how I try I don't get the bubbler milking. And therefore it is unfortunately not satisfying for me at the moment. Also dry- as i said, there is vapor, yes. But the hits feel light and I don't get that much of an effect out of it :(
Click to expand...
With Carb hole fully closed and draw as slowly as you possibly can then you should be able to get a really throaty hit with lots of clouds. Then it's a case of feather the Carb to create a cooler hit. The other option I have tried is draw it into mouth then inhale - like a cigarette or joint, then you can take 4 of 5 small gentle pulls in the same lung full.

The slower you pull, the hotter and more concentrated the hit. The air has more time to be heated and the then the herbs have hotter air flowing over them. It's the opposite from smoking. Drawing harder just dilutes the vapor with more air that is heated less.
 
Last edited:
T

Tommy10

Well-Known Member
Squiby said:
I agree with @natural farmer , the heated air if increased, still needs to pass between the cap and bowl via deeper or additional grooves in the cap. Other than refining the cooling fins, the bowl grooves are the primary improvement now being made. The double helix isn't just sexy, it improves the convection to conduction ratio.

@Tommy10 tried drilling into a cap in the early days. if I remember correctly it was a fail. In the name of science he sacrificed his cap. :bowdown:May we all observe a moment of non vaping in Tommy 10 name.
Click to expand...

Yes my actions were a fault for my working cap, a win for the scientific community
 
Joaon

Joaon

Well-Known Member
I would not suggest to past the clicks. Instead, play with the spot where the flame go:
Heating near the tip end (DYNAVAP) , and you have full flavor, little vapor.
The more you go on the digger out end (DYNAVAP), the more it will become thick an powerful.

whether using a candle, a Bic, or a single torch, if I heat on DYNAVAP spot, the clouds are big and visible.

The carb hole is also important. You can move an O-ring to match the carb hole, and fine tune it ;)
Mine is almost closed, but still airy. Once closed with finger, I get a thick and warm vapor

fD6lFMD.jpg



I must say that I've not combusted once, and extract pretty well all loads with this technique :2c:
Always respected the clicks.
 
invertedisdead

invertedisdead

PHASE3
Manufacturer
Tony Timeless said:
What are possible reasons that I am NOT getting thick enough vapor production?
I am using a single flame torch (the Vapman original torch) , I tried several grind consistencies. And right now I am having some nice Pineapple Kush buds. They have been harvested not that long ago and will get better with some time curing that's for sure, but the Evo for example gives me huge clouds with this herb, so I can except the herb being the reason for this weak vapor production. So therefore it must be my heating technique I guess but no matter how I try I don't get the bubbler milking. And therefore it is unfortunately not satisfying for me at the moment. Also dry- as i said, there is vapor, yes. But the hits feel light and I don't get that much of an effect out of it :(
Click to expand...

It hits like a dab when you get it right though. Keep working at it, it's fun to feel like getting stoned is a brand new experience.
 
Last edited:
P

Pyr0

Stoned Roses
Still haven't found my ideal jet lighter yet, but I seem to be starting to build up a bit of a collection now :uhoh:
Arranged in number of jets 1, 1, 1, 2, 3
RrCTYRJ.jpg

I think I prefer multiple jets, but I figured as the electronic ignition can be prone to failure, I'd pick up a couple with flints too

Is this LAS ???:shrug::doh::huh::rolleyes::uhoh::ninja::worms:
 
Last edited:
Chose

Chose

Well-Known Member
Tony Timeless said:
Hi guys,


I just wanted to give a little update after reporting that I struggled somehow with my Ti Woody.

I am lucky that I've had no more combustion happening since then and I am able to clear a cap within 3 heating cycles - when I inhale natively / dry.

I've read several pages back on this thread and I would say I know basically all I need to know when it comes to heating techniques or inhaling techniques.

But, still , I am really struggling and I hope maybe got some ideas for me, here?

The ABV comes out nice evenly brown, but I simply feel that I could get out of this vape WAY more.

I tried out how the Woody would perform with my water pipe so I loaded a small amount, but here also: I get vapor, yes, but I am miles away from milking my bubbler, like (for example) my Evo or the GH does.
I saw several videos of vapcaps milking bubblers - or when used natively: vapor-production like if the person was smoking on an e-cigarette with liquid.

Don't get me wrong please:
I really like this little thing. I already LOVE the company - i got a private message answering one of my questions concerning cleaning - how great CS is that?
And i would love to upgrade my Woody to maybe a Woody S or even buy an omnivap .. BUT as long as I am struggling that much I am on the fence a little now.

Could anyone chime in and help me out here ?

What are possible reasons that I am NOT getting thick enough vapor production?
I am using a single flame torch (the Vapman original torch) , I tried several grind consistencies. And right now I am having some nice Pineapple Kush buds. They have been harvested not that long ago and will get better with some time curing that's for sure, but the Evo for example gives me huge clouds with this herb, so I can except the herb being the reason for this weak vapor production. So therefore it must be my heating technique I guess but no matter how I try I don't get the bubbler milking. And therefore it is unfortunately not satisfying for me at the moment. Also dry- as i said, there is vapor, yes. But the hits feel light and I don't get that much of an effect out of it :(
Click to expand...
I'm a noob two weak owner of ti woody I've played with it and tried many ways to get results can't put in to words what works every one is different .
But what I do now is cover carb two secs slow draw then hover my finger above carb like touching it with the lightest pressure possible
And move finger around the carb with light draw letting small amounts or air in its hard to explain its a delicate proses it's more of a feeling in the back of my throat but clouds will follow don't get to stressed just enjoy learning and you will find what works for your vape styl
Ime no expert but I believe this vape gives good results once you find your personal sweet spot and that's why I love it
So off to find if I can work out an even better style sweet
Chose
Ps don't give up you will get the love
 
natural farmer

natural farmer

Well-Known Member
DDave said:
This is my favorite micro-dosing method with the VapCap. Single hit kills the load.

There is is problem with this!

VapCap is fun to vape with. So even though I'm medicated off that single hit to a level where I wish to be, I still want to VAPE more with VAPCAP!!! :rant:
Click to expand...
Yes man! I like vaping with the Vapcap so much that I wish I had herbs with minimum THC and an iron throat so I can vape and vape and vape... I just can't get enough! Vapcap is much more psychologically addictive than the herb itself me thinks!!! :freak:
 
Copacetic

Copacetic

Somewhere North of The Wall
DDave said:
This is my favorite micro-dosing method....
..... even though I'm medicated off that single hit to a level where I wish to be, I still want to VAPE more with VAPCAP!!! :rant:
Click to expand...


natural farmer said:
Yes man! I like vaping with the Vapcap so much that I wish I had herbs with minimum THC and an iron throat so I can vape and vape and vape... I just can't get enough! Vapcap is much more psychologically addictive than the herb itself me thinks!!! :freak:
Click to expand...

natural farmer said:
Tried all... :puke:

Not even close to THE HERB's superior taste and vapor production! :2c:

:peace:
Click to expand...

ME TOO!
I wish there was a way to get herb with less actives, but all the taste/vapour of top shelf.
Blasphemy I know, but my vanishingly low tolerance means that the VC's (and my Milaana) have me on the floor before I've vaped to satisfaction :uhh:

Still, there are worse problems to have than vapes that are too efficient I suppose :razz:

I wonder if plain old hemp can be grown/harvested in a way that provides a similar taste/vape to herb?

Sorry, I suppose this comment belongs elsewhere, but it does speak to the efficiency of the VC!
 
Chose

Chose

Well-Known Member
Copacetic said:
ME TOO!
I wish there was a way to get herb with less actives, but all the taste/vapour of top shelf.
Blasphemy I know, but my vanishingly low tolerance means that the VC's (and my Milaana) have me on the floor before I've vaped to satisfaction :uhh:

Still, there are worse problems to have than vapes that are too efficient I suppose :razz:

I wonder if plain old hemp can be grown/harvested in a way that provides a similar taste/vape to herb?

Sorry, I suppose this comment belongs elsewhere, but it does speak to the efficiency of the VC!
Click to expand...
Spanish hemp flowers
0.2 thc 4percent cbd
 
Copacetic

Copacetic

Somewhere North of The Wall
Chose said:
Yes I love it very tasty and gives a great vape only problem is everybody in the uk is sold out due to new licensing rules starting from the 1st November but here is the company selling them
Roo and company uk(cbd)
Click to expand...

DAMMIT!
Thanks anyway man, I e-mailed them, but don't hold out much hope :doh::mad:
Typical that I would hear about this mere days before they are banned!
It's especially annoying that this product isn't a 'legal high'.
No high at all I'd imagine.
I'm not opposed to HMG taking dangerous products off the shelves, but this clearly doesn't fit into that category :shrug:

BALLS!!!!!
 
E

EmDeemo

ACCOUNT INACTIVE
Chose said:
Yes I love it very tasty and gives a great vape only problem is everybody in the uk is sold out due to new licensing rules starting from the 1st November but here is the company selling them
Roo and company uk(cbd)
Click to expand...

Dammit, I was gonna get some of this from vapefiend next time he had stock. I guess that wont be happening!
 
EmDeemo,
UnshavenFish

UnshavenFish

Well-Known Member
emmdeemo said:
Dammit, I was gonna get some of this from vapefiend next time he had stock. I guess that wont be happening!
Click to expand...

Seen it a while ago and could have ordered but never got round to it, I'm guessing it's similar to the stuff on Amazon maybe, never tried it or used any of the sellers but as its sold as tea it might get around the ban :shrug:

https://www.amazon.co.uk/Eco-Organi...?ie=UTF8&qid=1477669815&sr=8-15&keywords=Hemp

If it's still listed in November I will order some to try, again im not recommending this seller it's just a reference.

And just to swerve back on topic a little...I love my woodie :brow:

I've also been using my og for pipe tobacco and it works really well just have to heat closer to the D to keep the heat a little lower.
 
You must log in or register to reply here.
Top Bottom