Dynavap VapCap
- Thread starter Fenton Mewley
- Start date
Marlon Rando
Well-Known Member
@stark1 hey brotha you staying out of trouble? Word has it dynatec is up to some tin delish
@shopdognyc thanks dawg (fist bump) how's the day?
@shopdognyc thanks dawg (fist bump) how's the day?
shopdognyc
Well-Known Member
Great finished long day off with success on my sticky brick flip@stark1 hey brotha you staying out of trouble? Word has it dynatec is up to some tin delish
@shopdognyc thanks dawg (fist bump) how's the day?
stark1
Lonesome Planet
You tell us, Bud -(you will never look back)! Wink
—&while you are at it, I bet you are going to wonder if an Orion is as good as a lighter.
The journey continues. The wallet howls.
Orion, rising
(Horsehead Nebula, in the Constellation Orion)
Last edited:
TommyDee
Vaporitor
Yea, they're junk, send them to me to dispose of and I'll send you a '19 and '20 for you to play with
stark1
Lonesome Planet
Last edited:
After looking at this more I am pretty certain I broke the condensor?
There is the tube and a threaded part that retains the mouthpiece. That threaded part is soldered or has some small groove that fixes it to the tube. When I tapped the condensor with the mouthpiece attached I broke that bond so the threaded part will slide freely on the tube and will come off.
I am not making a warranty claim because it was my fault. I just used too much force. I am just trying to determine if they sell the Omni XL condenser without the mouthpiece. Hate to spend $ 95 to get whole. But, looks like I am stuck. Contacted customer service at Dynavap and sent them pics. Still waiting. Tried to call them and could not get through.
What is the symbol on this board to post pics? I have some to share but can not get them posted.
There is the tube and a threaded part that retains the mouthpiece. That threaded part is soldered or has some small groove that fixes it to the tube. When I tapped the condensor with the mouthpiece attached I broke that bond so the threaded part will slide freely on the tube and will come off.
I am not making a warranty claim because it was my fault. I just used too much force. I am just trying to determine if they sell the Omni XL condenser without the mouthpiece. Hate to spend $ 95 to get whole. But, looks like I am stuck. Contacted customer service at Dynavap and sent them pics. Still waiting. Tried to call them and could not get through.
What is the symbol on this board to post pics? I have some to share but can not get them posted.
Bad Dog
Yeah I pissed on the rug...... so what
It's the box left off the emojis but first you need to go to your account page and go to edit preferences, look for a box that says yes I understand and want the ability to post pictures, it can take up 24 hours till you can
https://www.dynavap.com/dynashop/vaporizers-parts/omni-xl-condenser-assembly-with-mouthpiece/
If you see this pic of the OMNI XL condenser and mouthpiece from the DynaVap site you will see the threaded piece I described previously. I broke whatever was holding that piece on the condenser tube? There is no question that it is broken and the device no longer draws correctly.
I have gone heavily in with DynaVap. I first got the Omni XL and recently got a Simrell titanium XL stem and a separate titanium tip and cap. Just got the portable VapeOven on Monday and that seems like it will be a game changer.
Just trying to decide what to do about the broken condenser on my Omni XL as I would still like to use it. It is only a couple weeks old. Just hate spending $ 95 on top of everything I have just spent.
I have a feeling that the Simrell stem with the VapeOven will be the hot setup.
Well, that link did not work as intended. But, if you just select the 2nd pic of the 2 pics of the Omni XL condenser and the mouthpiece separated I think you will see what I mean. Got a feeling I am screwed. Not in the mood to spend $ 95 right now after everything I have just spent. I have a steel rod that is a Pax 2 cleaning accessory that I could have used to push the screen out for cleaning. It just felt too tight and I did not want to force it. I am going to have to find a suitable and safe tool to use. Of course, I should have soaked the tip in 91% alcohol first. That would have avoided the problem. I just did not realize how tightly that screen was stuck?
If you see this pic of the OMNI XL condenser and mouthpiece from the DynaVap site you will see the threaded piece I described previously. I broke whatever was holding that piece on the condenser tube? There is no question that it is broken and the device no longer draws correctly.
I have gone heavily in with DynaVap. I first got the Omni XL and recently got a Simrell titanium XL stem and a separate titanium tip and cap. Just got the portable VapeOven on Monday and that seems like it will be a game changer.
Just trying to decide what to do about the broken condenser on my Omni XL as I would still like to use it. It is only a couple weeks old. Just hate spending $ 95 on top of everything I have just spent.
I have a feeling that the Simrell stem with the VapeOven will be the hot setup.
Well, that link did not work as intended. But, if you just select the 2nd pic of the 2 pics of the Omni XL condenser and the mouthpiece separated I think you will see what I mean. Got a feeling I am screwed. Not in the mood to spend $ 95 right now after everything I have just spent. I have a steel rod that is a Pax 2 cleaning accessory that I could have used to push the screen out for cleaning. It just felt too tight and I did not want to force it. I am going to have to find a suitable and safe tool to use. Of course, I should have soaked the tip in 91% alcohol first. That would have avoided the problem. I just did not realize how tightly that screen was stuck?
stark1
Lonesome Planet
It does not take a great pressure to push the thin screen out; so “breaking” the condenser by doing so is
Not likely. As someone said it is the “sanctioned” (approved) method.
Connect with DV CS, their service is impeccable.
I’d be surprise if they don’t work something out with you, to “fix” your $95 condenser tubing; or simply replace it.
If you don’t, they will never know. Shit happens.
PS Use imgbb.com- it is simple- to post pictures, as one alternative
Not likely. As someone said it is the “sanctioned” (approved) method.
Connect with DV CS, their service is impeccable.
I’d be surprise if they don’t work something out with you, to “fix” your $95 condenser tubing; or simply replace it.
If you don’t, they will never know. Shit happens.
PS Use imgbb.com- it is simple- to post pictures, as one alternative
Last edited:
StringTheorista
Well-Known Member
On my omni condenser, those parts seem to be press fit together. I can actually change the length of the condenser by pulling it slightly out of that press fitting. Have you tried brute force pressing it back in? If it’s not working right, nothing to lose...
stark1
Lonesome Planet
Gosh, m0sh Gotta luv all things OG
Yeah, go ahead, get ahead with the new fangled stuff, it will whet your VAS—and remember,
Mag heaters are all the rage, these daze.
(Condenser has “lip” on mp end, so no O-ring need apply?)
Last edited:
floribud
Well-Known Member
Wishing my local dispensaries would sell grams instead of just 1/8s. I don't want to vape the same stuff all the time, but it takes me forever to get through an 1/8
Well the PSM can no longer hold a charge.
Anyone have some suggestions on a new IH?
It doesn’t have to be portable.
Anyone have some suggestions on a new IH?
It doesn’t have to be portable.
Demonic chronic
Chronic Connoisseur. Butane power✊🏴🇺🇦
Can u not change the battery in the PSM?
ClearBlueLou
unbearably light in the being....
Your restraint seems legendary...in a perfect world, I go through 1/2oz in a month by myself, easy. Under current restraints, I *can* make an eighth last 3 weeks - using my Vapcaps - but that’s not a perfect world IMO. I agree, having more than one variety to work through would be ideal, but that’s only happened...twice?
shopdognyc
Well-Known Member
I'd see what they say and they may cover it afterwall.
Can you open it up and swap out the batteries?
Demonic chronic
Chronic Connoisseur. Butane power✊🏴🇺🇦
Already suggested that a few posts up lol
Not sure. I have to take a look at the steps.
either way does anyone suggest a different one... maybe that plugs into the wall?
shopdognyc
Well-Known Member
I need to scroll back more! haha
Demonic chronic
Chronic Connoisseur. Butane power✊🏴🇺🇦
Pretty sure pipes has a video of him disassembling a PSM, looked like u could change battery, worth a look