Dynavap VapCap

[Xclerk]

That's a nice piece. Too rich for my blood not sure if the inner dimensions of its bowl would work. Seems shallow as well. Feel like you could get the same expierience for much less. Have you seen a hydotube incycler. They come on a stand... I was using one of those for a little kinda fun. Its for a vape xhale but hey you like what you like

 

[F-UCTD]

I think I used one with a vape xhale cloud evo at my friend's house.

 

[StringTheorista]

Looking to get a glass piece for the Shadow M. I am after something small and classy, like if it was left out doesn't scream bong. So any suggestions? Maybe a smoked glass J hook or a bubbler that is small, svelte and discreet? Keen to hear your ideas guys

I’m a big fan of the Sneaky Pete globe. My only complaint is I wish it was offered without the logo. Aside from that, it’s small and cute and works really well with vapcaps

 

[mrb]

Some say the steel tip gives bigger fuller hits as opposed to the titanium.

Does anyone have any thoughts on this?

Not for me. 2 years in I've always found the Ti WAY better than the SS. I try my M tips every now and then, but never as good for me. People sway both ways and some like me are steadfast in one camp. . the only real way to know is too try. .

 

[letter never sent]

I’m a big fan of the Sneaky Pete globe. My only compliant is I wish it was offered without the logo. Aside from that, it’s small and cute and works really well with vapcaps

Seconded. This is the piece I just got and it’s perfect for the Vapcap. I highly recommend the glass mouthpiece though. The included whip is unwieldy and can easily tip the globe. It’s also harder to pull through. It’s actually on sale right now so you can get the globe + mouthpiece for a little over 50 bucks. Pete’s customer service is great and it ships really fast too. Perfect for someone who wants to dip a toe into the glass world.

 

[Monk Debate]

Not for me. 2 years in I've always found the Ti WAY better than the SS. I try my M tips every now and then, but never as good for me. People sway both ways and some like me are steadfast in one camp. . the only real way to know is too try. .

Have you tried a correctly machined 2019 M tip? It narrows the gap significantly IMO.

 

[cybrguy]

I’m a big fan of the Sneaky Pete globe. My only complaint is I wish it was offered without the logo. Aside from that, it’s small and cute and works really well with vapcaps

I have wanted one of these but never bit. There are knock offs, and I think SPs globe is itself a knock off of another name brand globe.
There are gazillions of ways to do this. I personally like to use a low volume piece with VapCaps. Here are a couple of my favorites, the infamous D020 (with a reducer) and a typical Ash Catcher and J-Hook.

 

[Moses Baca]

I’m a big fan of the Sneaky Pete globe. My only complaint is I wish it was offered without the logo. Aside from that, it’s small and cute and works really well with vapcaps

I've been looking at glass recently, too. The MF Orbiter is a nice looking globe and includes a stand to keep it from tipping.

If you haven't seen it yet, check out the Cheap, high-quality bubbler?? thread for tons of info.

 

[mrb]

Have you tried a correctly machined 2019 M tip? It narrows the gap significantly IMO.

No, I haven't. Perhaps there is a totally different art to using the SS that I've never found, but it's so far off the mark for me, compared to the Ti, that I'm not really interested in SS anymore. The Ti tips exist, so I'm a happy camper. . .

 

[Monk Debate]

No, I haven't. Perhaps there is a totally different art to using the SS that I've never found, but it's so far off the mark for me, compared to the Ti, that I'm not really interested in SS anymore. The Ti tips exist, so I'm a happy camper. . .

With Dynavap there’s pretty much an option for everyone. Glad you have the pieces that work best for you!

 

[DirtyD]

My favorite vapcap bong was like 13 or 15 bucks, from China. Arrived broken, I complained and they sent me a new one within the week. It has a small chamber, with Swiss cheese holes in main tank. Nice connection/ fitting, fits the Blackwood nonavong stem perfect. Cheers! D.

 

[stark1]

It always help to visualize with a pic, yas?

 

[cybrguy]

My favorite vapcap bong was like 13 or 15 bucks, from China. Arrived broken, I complained and they sent me a new one within the week. It has a small chamber, with Swiss cheese holes in main tank. Nice connection/ fitting, fits the Blackwood nonavong stem perfect. Cheers! D.

It always help to visualize with a pic, yas?

Yeah, I just can't picture which wp you refer to...

 

[Vape weed everyday]

I used my m17 and after using titanium so long I can taste the steel now, maybe an iso soak was needed as been sitting idle for 2years but I defo could taste the steel so I can't tell if it have better clouds or not as I got put off in my first cycle by the taste.

 

[stark1]

Quick! Rinse out your mouth with some imperial IPA!

 

[cybrguy]

My favorite vapcap bong was like 13 or 15 bucks, from China. Arrived broken, I complained and they sent me a new one within the week. It has a small chamber, with Swiss cheese holes in main tank. Nice connection/ fitting, fits the Blackwood nonavong stem perfect. Cheers! D.

Yeah, I just can't picture which wp you refer to...

If you can't or don't want to post a pic, a link to it at a seller site would be fine...

 

[Ramahs]

Anyone know why the exact same configured OmniVong XL (either light or dark wood) shows as $5 more in the Dynabuilder than what it is priced at elsewhere on the site? I can't figure out what is different about it in the Dynabuilder.

Does it come with something extra (extra screens or something?) when ordered via the Dynabuilder?

Looking to get a glass piece for the Shadow M. I am after something small and classy, like if it was left out doesn't scream bong. So any suggestions? Maybe a smoked glass J hook or a bubbler that is small, svelte and discreet? Keen to hear your ideas guys

I've had my eye on this for a little while now. It's 10mm GonG will mate with the M tip without buying anything extra. I plan to order it soon:
(***edit - Nevermind, I just ordered it, lol***)

https://grav.com/collections/bubblers/products/upright-pocket-bubbler

I’m a big fan of the Sneaky Pete globe. My only complaint is I wish it was offered without the logo. Aside from that, it’s small and cute and works really well with vapcaps

Yeah, I have the same issue with logos on my glass. I even messaged Pete to ask if it would be removeable with the right solvent, but he didn't think so. That cuts it out of the options for me. If he'd only put it on the bottom or something like that, I'd be okay with it.

Oh well. The Magic Flight Orbiter doesn't have a logo, but it doesn't have a flat bottom on the glass, which requires the wood stand with those ugly wires holding it in place, so it's a no-go for me as well.

I'll be interested in buying it the moment he offers one with his logo plastered in plain view on the side.

 

[StringTheorista]

The globe
https://www.sneakypetestore.com/products/the-sneaky-pete-globe

The glass mouthpiece
https://www.sneakypetestore.com/products/the-sneaky-pete-globe-glass-mouthpiece

 

[MikeG7265]

I just grabbed this little piece this weekend to have something a bit smaller than my Grav Labs piece.

https://dankgeek.com/products/hemper-turbine-rig

 

[Chandler]

I’m a big fan of the Sneaky Pete globe.

Seconded. This is the piece I just got and it’s perfect for the Vapcap.

Agreed. Also my first glass piece. I find it very effective!


Edit* day off. Been a very mellow day. (if you know what I mean) I find too much use from this Glass hurts the roof of my mouth. Big hits, but the glass mp sends the vapor directly to the roof of my mouth which gets very sensitive after a handful of sessions... I do like this Glass but I'm still trying to figure things out

 

[Moses Baca]

Flat bottom or not, reviews of the Sneaky Pete globe say it tips easily. That's why I went a different direction. (FC Rattle Can)

I spent this afternoon cleaning all our vapes and vape gear. Time to relax and hit a clean vapcap.

 

[stark1]

Still a-waiting for D to post his clean 13 or 15 bux teaser bong—in the
Meantime, the fat mouthpiece is always a “handy Andy”

(WP courtesy of muunch)

Cap still functional, despite the ding-a-ding-ding

 

[DirtyD]

Can't figure out how to share the link but Amazon, small glass bongs.: it's called "YUNNEMY" Green 8.4 inner. Clear but a green mouthpiece, swiss cheese holes in the tank. Yeah and I guess I had a memory lapse about the price, this one's listed at 32.99! Still a great vapcap bong and great cs in my experience, don't know if it's same vendor as this was a while back. And I could have sworn it was cheaper ! Happy Monday vapcappers! Cheers, D.

 

[stark1]

Wouldn’t it be novel to have a dedicated plug-in induction heater with two garages to
Park a couple of VapCaps. Plus storage for flower/ABV.

An integrated home showpiece.

Should go big on Antiques Road Show, in time.

In the meantime, I still have hope for a small belt portable IH for the itinerant EDC.



This, D?

“Made by Yunnemy”— Delivered by June-July

Don’t mind paying the extra, but June-July? Father Time is relentless

 

[DirtyD]

That's it, only mines green. Thanks @stark1 ! Worth the wait. Cheers! D.