Arawfish
How many vaps could a Vapman vap…
I’d also like to say that it’s not effecting performance as of yet. Even if it’s cracked. Still not what I want to see but at least it’s not out of commission.
dotLeaf
- Thread starter purpletweed
- Start date
staircase slight of hand
Well-Known Member
Could anyone that’s used this and the Lotus WPA give a size comparison of both bowls?
jbm
Well-Known Member
So I just ordered one direct from dotleaf. VapingDNA is out of stock. ElementVape has them but with tax and ship it turns out to a 5 dollar difference from ordering from dotLeaf, plus I’m sure to get the latest revisions. I do have a question - do we know the temps for each step?
From the instruction book...
Also, here's a side by side with the DotAIO SE for comparison
Comparison with more vapes
Also, here's a side by side with the DotAIO SE for comparison
Comparison with more vapes
Last edited:
Gone from where? It looks like www.dotleafofficial.com still has them in stock. Just checked the website and there's no indication of them being out of inventory. Though, I checked the US site, so maybe that's why? Not sure if theres a difference in stores
endof3d
Cognitive Dissonance D 5 +
@khelek41girl Thanks for the clarification. So the boost mode is a 15 degree C temperature hike that takes one to the next higher preset.
Edit: Does the boost mode stay at the higher temp if the button is released?
Edit: Does the boost mode stay at the higher temp if the button is released?
Last edited:
You do have to hold down the button to keep boost mode activated
BestBuds
The Dude
I have an empty spot in my collection for a conduction vape. I was able to get a vapbong unexpectedly so it looks like my conduction spot will remain open for now. I like, very much, what I see here so far. The possibility for modifications made by those smarter than I, is tantalizing. But even as is, the vapor production is impressive.
kadjo
Well-Known Member
Gone from vaporDNA at 20% off apparently. I double checked. Its not the direct from manufacturer site. Thanks for the look out!
darco
Well-Known Member
I’ve had my Dotleaf for a couple of days now and had a bunch of issues with it.
The chamber/pod does not makcontact properly. Every time I put the chamber in and put it in fully, the device does 3 white blinks. I have to fiddle with the chamber a lot to get to the heating mode. if I hold the chamber pushed down towards the bottom contact, and then triple click, the device starts heating. And moment I let go, it does a triple blink once again and stops.
After a bunch of fiddling and cleaning contacts, I got to the heating mode. My first 2 bowls came out nearly charred and vaped incredibly hot at the #2 setting.
Even though the 3rd bowl was fine, it only worked if I had the chamber at a significant angle (which caused air to leak through the top)
I have written to the company and they are going to ship replacement parts to me directly (Even though I’m in Canada).
Not sure if it’s the gasket or the chamber that’s at fault. There is no visible damage to the gasket.
I’m going to hold off from using the device until the replacement parts arrive.
The chamber/pod does not makcontact properly. Every time I put the chamber in and put it in fully, the device does 3 white blinks. I have to fiddle with the chamber a lot to get to the heating mode. if I hold the chamber pushed down towards the bottom contact, and then triple click, the device starts heating. And moment I let go, it does a triple blink once again and stops.
After a bunch of fiddling and cleaning contacts, I got to the heating mode. My first 2 bowls came out nearly charred and vaped incredibly hot at the #2 setting.
Even though the 3rd bowl was fine, it only worked if I had the chamber at a significant angle (which caused air to leak through the top)
I have written to the company and they are going to ship replacement parts to me directly (Even though I’m in Canada).
Not sure if it’s the gasket or the chamber that’s at fault. There is no visible damage to the gasket.
I’m going to hold off from using the device until the replacement parts arrive.
Skinku
Well-Known Member
I am following this with interest and can see my self buying a v2 for water.
Love my DotAios, I use 3fVape and FastTech for accessories.
www.3fvape.com
Love my DotAios, I use 3fVape and FastTech for accessories.
Search - 3FVape
RobbIt
Well-Known Member
Mighty is still the king with Arc GT and Solo 2 close seconds imho. Dotleaf is excellent also assuming they fix the chamber issues with this early rollout.
btw I haven’t had any of the chamber issues after about four battery changes (about 10 bowls).
RobbIt
Well-Known Member
Actually, I’ve had some of the ‘fiddling’ and ‘charring’ issues too.
RobbIt
Well-Known Member
Yes stays boosted after you hold and realease power button. Each time raises temp 15 degrees until max temp reached.
RobbIt
Well-Known Member
296-DA7-D1-3-DD2-478-C-82-A8-A2-A6-D1-F16-A63 hosted at ImgBB
Image 296-DA7-D1-3-DD2-478-C-82-A8-A2-A6-D1-F16-A63 hosted in ImgBB
E2-F14941-93-B2-4-F2-A-BA7-E-E505-F2-FB386-D hosted at ImgBB
Image E2-F14941-93-B2-4-F2-A-BA7-E-E505-F2-FB386-D hosted in ImgBB
E72-FF8-EE-52-E5-4912-89-EA-8-E5208631-B89 hosted at ImgBB
Image E72-FF8-EE-52-E5-4912-89-EA-8-E5208631-B89 hosted in ImgBB
C493-DC88-3074-4903-A107-CE65410-A4-ACD hosted at ImgBB
Image C493-DC88-3074-4903-A107-CE65410-A4-ACD hosted in ImgBB
8-B6-BD5-CE-571-D-4-BE4-9269-68-CA0-D55-E814 hosted at ImgBB
Image 8-B6-BD5-CE-571-D-4-BE4-9269-68-CA0-D55-E814 hosted in ImgBB
DCA3-D00-F-6-CA7-401-E-BB7-C-BE7-DE449-B84-A hosted at ImgBB
Image DCA3-D00-F-6-CA7-401-E-BB7-C-BE7-DE449-B84-A hosted in ImgBB
00023-B24-9-EB0-4378-9-B43-15-C6958-E8-CEB hosted at ImgBB
Image 00023-B24-9-EB0-4378-9-B43-15-C6958-E8-CEB hosted in ImgBB
staircase slight of hand
Well-Known Member
So the boost option just changes it to the next higher heat level for the duration of the session, like a temp-step option? Previous comments made it sound it was a temporary boost that only happened while holding the button down.
RobbIt
Well-Known Member
Correct. You do not need to hold the button down more than 1-2 seconds to effectuate the next boost level (15F increments).
staircase slight of hand
Well-Known Member
Can level 4 not be boosted? It seems like that would get us a fifth level.