Crafty/Crafty+ by Storz & Bickel

Roth

Pining for the Mountains
Has anyone been able to use the Crafty with the Lollipop on android phones? Or is it just because of the firmware on the Crafty itself?

I'm assuming you have an older 2.04v firmware Crafty? If so, the old firmware will not connect to an Android 5+ OS.

You have two options at this point.

1) Send it back to S&B and they will update you to the new version firmware Crafty that can connect to Android 5.

2) Download the 3rd party app "Vaporizer Control Center" by our friend here, @ligi. I also have a 2.04 Crafty and ran into this same issue a few weeks ago. I didn't want to send my Crafty into S&B yet, so downloaded this app. It allows me to connect, see the temps, change the temps, and it has a precise battery level as opposed to a 6 bar system.

So at this point, I plan to just keep running my Crafty with the VCC app until I run into a problem.



If you don't have a 2.04 firmware Crafty, then I'm not sure what your problem is.

Hope that helps!
 

jdee

Well-Known Member
Hello guys, I found this interesting forum about the wonderful crafty that I got since about 6months now, but yesterday I tried to connect the crafty to my new IPhone 4 app but it's not allow me to save the serial number ( can't press on save button)... I don't know what to do because it was working perfectly with my old IPhone 4s... Please guys help me, what should I do ?! :p thanks for your help !!

iphone 4 doesnt support bluetooth LE 4.0 (required for crafty)
 

Hot Dog Day 187

Well-Known Member
nobody has made a web app for the crafty yet? everyones computer has had bluetooth 4.0 for like a million years and if you don't, well you shouldn't have a crafty if you can't afford to spend another $5 on a usb bluetooth adapter if your computer and phone cant do it!
 
Hot Dog Day 187,

Jealousy

Well-Known Member
I'm assuming you have an older 2.04v firmware Crafty? If so, the old firmware will not connect to an Android 5+ OS.

You have two options at this point.

1) Send it back to S&B and they will update you to the new version firmware Crafty that can connect to Android 5.

2) Download the 3rd party app "Vaporizer Control Center" by our friend here, @ligi. I also have a 2.04 Crafty and ran into this same issue a few weeks ago. I didn't want to send my Crafty into S&B yet, so downloaded this app. It allows me to connect, see the temps, change the temps, and it has a precise battery level as opposed to a 6 bar system.

So at this point, I plan to just keep running my Crafty with the VCC app until I run into a problem.



If you don't have a 2.04 firmware Crafty, then I'm not sure what your problem is.

Hope that helps!

Thank you for the helpful post. We tried the VCC- app and used the Poll- setting for older firmnware, but no luck. Maybe it just needs some tweeking to get it working with the VCC as this is a earlier Crafty from 2014, I contacted SB and will keep trying to get the VCC to work in the mean time.
 
Jealousy,

marduk

daydreamer
Thank you for the helpful post. We tried the VCC- app and used the Poll- setting for older firmnware, but no luck. Maybe it just needs some tweeking to get it working with the VCC as this is a earlier Crafty from 2014, I contacted SB and will keep trying to get the VCC to work in the mean time.

I'm in the same boat with an older 2.04 firmware. VCC doesn't work with Lollipop or Marshmallow for me, so I just use my iPad to adjust temps if I need to.
 
marduk,

Krizzle

Hi Very high
nobody has made a web app for the crafty yet? everyones computer has had bluetooth 4.0 for like a million years and if you don't, well you shouldn't have a crafty if you can't afford to spend another $5 on a usb bluetooth adapter if your computer and phone cant do it!

Someone has made an app I am sure it has been mentioned several posts back.

Got the Easyflow water tool adapter for my Crafty today. Nice piece, just running it through my Hydrotube, can take massive hits now setting this beast to 200C :freak:
:haw:
 

Roth

Pining for the Mountains
Thank you for the helpful post. We tried the VCC- app and used the Poll- setting for older firmnware, but no luck. Maybe it just needs some tweeking to get it working with the VCC as this is a earlier Crafty from 2014, I contacted SB and will keep trying to get the VCC to work in the mean time.

Try it without the "Poll" setting. No idea what that is/means, but I don't use it on mine. I just fired up VCC and it instantly found my 2.04 Crafty that was purchased in Oct '14.

I'm in the same boat with an older 2.04 firmware. VCC doesn't work with Lollipop or Marshmallow for me, so I just use my iPad to adjust temps if I need to.

I'm running Android 5.0.1, no idea if that's Lollipop or Marshmallow, with a 2.04 firmware also. Strange that VCC works for me, and not you. Wonder what the difference is?
 
Roth,

marduk

daydreamer
Try it without the "Poll" setting. No idea what that is/means, but I don't use it on mine. I just fired up VCC and it instantly found my 2.04 Crafty that was purchased in Oct '14.

I'm running Android 5.0.1, no idea if that's Lollipop or Marshmallow, with a 2.04 firmware also. Strange that VCC works for me, and not you. Wonder what the difference is?

Tried with and without polling, no luck either way.

5.01 is Lollipop. My phone with Lollipop is on 5.1. Maybe 5.01 didn't break the connectivity? Or maybe it's a BT chipset difference on the phones or even on the Crafty?
 

Roth

Pining for the Mountains
Tried with and without polling, no luck either way.

5.01 is Lollipop. My phone with Lollipop is on 5.1. Maybe 5.01 didn't break the connectivity? Or maybe it's a BT chipset difference on the phones or even on the Crafty?


Hmm, that's too bad. Maybe @ligi can offer some insight? I'm using a Samsung Galaxy S4 if that makes any difference. My Crafty's SN is in the 500's, so it's a very old one.

If not, looks like you might have to send it in to S&B to get an updated Crafty. I'm just holding onto mine as long as possible since this one's been rock solid.
 

skeletor

Active Member
Has anyone been able to use the Crafty with the Lollipop on android phones? Or is it just because of the firmware on the Crafty itself?
Yep. Every day -- but with 2.07 and 2.08 firmware.

I've heard rumor's that @ligi 's app in the market works with older firmwares on Lollipop, but cannot confirm. Maybe he can?
 
skeletor,
  • Like
Reactions: OG_LH

headdoctor

Well-Known Member
I've read most of this thread but still have a basic question. 99% of my vaping is done with my Volcano at home, but a handful of times each year I take a trip and need a portable; and even on those nights my use is very light. My TOTAL use might not be more than 10-20 hours/year. I know that the Crafty is expensive for so little use, but I've owned a Pax and a Solo and neither was remotely adequate in terms of vapor quality, ease of draw, etc.

My question is this: Given my light use, can I be more confident that I won't run into battery failures or other issues with the unit? Are most of the battery problems occurring in units with extensive hours of use? I know that any unit can be faulty; I'm asking to what degree use-hours contributes to failures and problems.

Thanks!
 

grokit

well-worn member
I've read most of this thread but still have a basic question. 99% of my vaping is done with my Volcano at home, but a handful of times each year I take a trip and need a portable; and even on those nights my use is very light. My TOTAL use might not be more than 10-20 hours/year. I know that the Crafty is expensive for so little use, but I've owned a Pax and a Solo and neither was remotely adequate in terms of vapor quality, ease of draw, etc.

My question is this: Given my light use, can I be more confident that I won't run into battery failures or other issues with the unit? Are most of the battery problems occurring in units with extensive hours of use? I know that any unit can be faulty; I'm asking to what degree use-hours contributes to failures and problems.

Thanks!
I believe that you are the ideal crafty user, much like myself just occasionally. Imo most of the issues are from trying to do back to back bowls, when these units seem to like to be able to cool off in between. I'm guessing that certain solder points inside the unit may be the weakness but this is just my supposition.
 

Roth

Pining for the Mountains
I've read most of this thread but still have a basic question. 99% of my vaping is done with my Volcano at home, but a handful of times each year I take a trip and need a portable; and even on those nights my use is very light. My TOTAL use might not be more than 10-20 hours/year. I know that the Crafty is expensive for so little use, but I've owned a Pax and a Solo and neither was remotely adequate in terms of vapor quality, ease of draw, etc.

My question is this: Given my light use, can I be more confident that I won't run into battery failures or other issues with the unit? Are most of the battery problems occurring in units with extensive hours of use? I know that any unit can be faulty; I'm asking to what degree use-hours contributes to failures and problems.

Thanks!

If you can afford the drop the cash for it, you won't regret it. Blows the Solo and Pax out of the water. It really is desktop performance in a portable.

I agree with Grokit that I'd suspect a large portion of the issues arising are from long sessions and back to back bowls causing the Crafty to overheat.
 

ntaylor

Un-Known Member
Not so fast buddy , a friend of mind used the crafty maybe a handful of times within three months before it died on him. Got another one and it didnt quite heat up like it was suppose to. IMO get an arizer more reliable no matter how much or little you use it
I was considering ordering a Crafty as backup for my Mighty, but have decided that an Arizer Air is a better choice .... based on advice received from Crafty owners.
YMMV
 

ntaylor

Un-Known Member
After you get your new toy, I'd love to hear your Mighty/Air comparison.

Thanks to ALL for your advice about getting or not getting a Crafty as backup for my Mighty.
Just now placed my Ariza Air order ... I'll be watching my mailbox in a few days!

I'm anxious to make the Air vs Mighty comparison, and will be certain to post my observations.
 

headdoctor

Well-Known Member
Not so fast buddy , a friend of mind used the crafty maybe a handful of times within three months before it died on him. Got another one and it didnt quite heat up like it was suppose to. IMO get an arizer more reliable no matter how much or little you use it

Thanks for responding (although I find "not so fast buddy" to be borderline rude). It doesn't sound like you own a Crafty and I'm actually not interested in anecdotal evidence. I'm interested more broadly in whether heavy use contributes to the rate of failure.

I know that people love the Solo (I haven't tried the Air) but I found the performance to be so inferior that I travel with my Volcano. Based on that, I'm hesitant to purchase another Arizer product. I'm willing to accept some risk in return for the chance of superb vapor performance.
 

Frank Reynolds

Well-Known Member
I'm actually not interested in anecdotal evidence. I'm interested more broadly in whether heavy use contributes to the rate of failure.
Not sure how you expect to collect data that isn't anecdotal from people on a forum about whether or not heavy use contributes to failure or not.

Would not every bit of information we get in that regard be anecdotal?
 

Roth

Pining for the Mountains
Not sure how you expect to collect data that isn't anecdotal from people on a forum about whether or not heavy use contributes to failure or not.

Would not every bit of information we get in that regard be anecdotal?

The difference is Frandemarco has some sort of agenda against S&B. All he does is trash them and the Crafty, and make hyperbolic statements.

Reliability issues are fair to bring up, but that's not exactly what Fran's doing.

Mod note: If there is a problem with a member hit the report button. This post comes very close to flaming.
 
Last edited by a moderator:
Roth,
  • Like
Reactions: Kaptan

Mr. Me2

Well-Known Member
Thanks for responding (although I find "not so fast buddy" to be borderline rude). It doesn't sound like you own a Crafty and I'm actually not interested in anecdotal evidence. I'm interested more broadly in whether heavy use contributes to the rate of failure.

I know that people love the Solo (I haven't tried the Air) but I found the performance to be so inferior that I travel with my Volcano. Based on that, I'm hesitant to purchase another Arizer product. I'm willing to accept some risk in return for the chance of superb vapor performance.
For what it's worth, I have a Crafty and (knock on wood) have not had any problems. I love it (though I'm not crazy about the cu maintenance). And I don't do back-to-back sessions with it.
 

headdoctor

Well-Known Member
Not sure how you expect to collect data that isn't anecdotal from people on a forum about whether or not heavy use contributes to failure or not.

Would not every bit of information we get in that regard be anecdotal?

In many ways you're right, of course, and I thought about that before posting. But there may be degrees here. First, referring to a friend's experience is clearly anecdotal; I'm more interested in the experiences of those who own and understand the Crafty. Second, I wonder at what point a collection of "anecdotal" stories begins to take shape as reliable evidence. We all know that the FC crowd may not always be an accurate sample of all users, but I would say that significant patterns that emerge here (such as complaints about battery life) do, at a certain point, tip over into something beyond anecdotal. That is, there are enough informed forum members that, collectively, their experiences are meaningful. Otherwise there's nothing to be learned out here!
 
Top Bottom