Crafty/Crafty+ by Storz & Bickel

t-dub

Vapor Sloth
Mine is firmware 2.08 - is there any good reason to send it in for firmware upgrade?
As long as your crafty pairs with your phone correctly, and functions correctly, I would use it. No need to fix something that isn't broken. If you send it in and it comes back and refuses to pair with your phone . . . well that would suck.
 

greenextinguisher

Well-Known Member
I joined the party this week. US order w/ serial number CY51G*** edit: ordered direct from S&B

Firmware 2.10. Heat up time is around 100 seconds.

My other vapes are a Firefly 2 of a few months and a Volcano of 8 years (basically all I've used since besides a handful of rolled combustibles and an iolite that functioned for a little while when away from home).

I got into portables lately because I wanted something on the go. I never loved the iolite, so I always assumed portables were just ok at best. I debated heavily between the FF2 and the Crafty but ultimately thought the FF2 was better for my portable use and I was correct. Once I experienced how strong the FF2 is, I decided I wanted to go all portables and stash the Volcano away for special occasions. As much as I love it, I'm no longer interested in having a vape as a focal point in my living room. haha

Not going to do a full review until maybe I've put some miles on it. I am very impressed, though. The thing is a beast in a very small package. There was a bit of a new vape smell that was oddly identical to a new car smell, but that seems to be clearing up. I also had to take off my smart watch and go into my closet to pair the thing to my phone, but we are all good now. I love the interface to the mobile app (at least the screen with the controls, the rest looks dated). Its so responsive just like an interface directly on the device. Color me impressed.

My plan is to do all capsules. Part of my reason for adding this to supplement the FF2 was that I wanted something that was good to session and relax without needing to stir and dump and refill. If I want to go another round, I just want to swap out a pre-packed can and go to town. This hasn't happened yet because the crafty punches pretty hard and I'm a relative lightweight. Instead, I'm finding that I can actually end a session without much waste by opening and dumping the capsule out when I'm done. The few times I've done it, I got a great follow up session later with the same capsule. Anyone else doing this?

I do plan to run this thing daily and if that means needing a second one or a mighty when my current one needs to be serviced, I'm ok with that. I know opening it hot isn't the best thing for it either, but I'm going to use it like I want to use it. Fingers crossed.

Thanks to FC, my collection grew from "just" a Volcano to add a FF2, Crafty and OmniVap (on order)! I know none of you will believe me, but I think I'm good for a while.
 

Thcgos

Vape Addict
I joined the party this week. US order w/ serial number CY51G*** edit: ordered direct from S&B

Firmware 2.10. Heat up time is around 100 seconds.

My other vapes are a Firefly 2 of a few months and a Volcano of 8 years (basically all I've used since besides a handful of rolled combustibles and an iolite that functioned for a little while when away from home).

I got into portables lately because I wanted something on the go. I never loved the iolite, so I always assumed portables were just ok at best. I debated heavily between the FF2 and the Crafty but ultimately thought the FF2 was better for my portable use and I was correct. Once I experienced how strong the FF2 is, I decided I wanted to go all portables and stash the Volcano away for special occasions. As much as I love it, I'm no longer interested in having a vape as a focal point in my living room. haha

Not going to do a full review until maybe I've put some miles on it. I am very impressed, though. The thing is a beast in a very small package. There was a bit of a new vape smell that was oddly identical to a new car smell, but that seems to be clearing up. I also had to take off my smart watch and go into my closet to pair the thing to my phone, but we are all good now. I love the interface to the mobile app (at least the screen with the controls, the rest looks dated). Its so responsive just like an interface directly on the device. Color me impressed.

My plan is to do all capsules. Part of my reason for adding this to supplement the FF2 was that I wanted something that was good to session and relax without needing to stir and dump and refill. If I want to go another round, I just want to swap out a pre-packed can and go to town. This hasn't happened yet because the crafty punches pretty hard and I'm a relative lightweight. Instead, I'm finding that I can actually end a session without much waste by opening and dumping the capsule out when I'm done. The few times I've done it, I got a great follow up session later with the same capsule. Anyone else doing this?

I do plan to run this thing daily and if that means needing a second one or a mighty when my current one needs to be serviced, I'm ok with that. I know opening it hot isn't the best thing for it either, but I'm going to use it like I want to use it. Fingers crossed.

Thanks to FC, my collection grew from "just" a Volcano to add a FF2, Crafty and OmniVap (on order)! I know none of you will believe me, but I think I'm good for a while.

Rather than drop out the hot capsule for a second session later, why not half pack a capsule and use a capsule liquid pad as a spacer?

(Only downside being that you would need to carry more capsules).
 

greenextinguisher

Well-Known Member
Rather than drop out the hot capsule for a second session later, why not half pack a capsule and use a capsule liquid pad as a spacer?

(Only downside being that you would need to carry more capsules).

Sounds like a great option. Do you think the liquid pad is necessary? It wasn't really my intention, but I was sufficiently faded and still had plenty of hits left, so I just gave it a shot.

8 full capsules could probably get me through a week, so a bunch of half-filled wouldn't be an issue.

I love the attention to detail with the crafty and its accessories. The capsule case can be used as a clamp to remove capsule lids (I learned that here) and can be used as a funnel when filling capsules or other containers. I love having less stuff, so anything multi-function is cool with me.
 
greenextinguisher,
  • Like
Reactions: Thcgos

Thcgos

Vape Addict
Sounds like a great option. Do you think the liquid pad is necessary?

The times that I do go solo I always use 1/3 full and the liquid pad ontop.
I tried 2x without it and I don't think it performed as well (but it still worked).

S&B actually advise you to use the liquid pad for partially filled loads (see the instruction manual).

Kelzjms.jpg
 
Thcgos,

Mr. Me2

Well-Known Member
The times that I do go solo I always use 1/3 full and the liquid pad ontop.
I tried 2x without it and I don't think it performed as well (but it still worked).

S&B actually advise you to use the liquid pad for partially filled loads (see the instruction manual).

Kelzjms.jpg
Personally, I'm not a fan of the pad as a spacer. Too cumbersome, it comes apart, a little messier than using a screen.... I find a screen with a wedge cut out (so it looks like pac man) works great as a spacer. Much easier and cleaner than the pad, serves its primary function (as a spacer) and helps keep the cu clean. Give it a try!
 

dunwich

Well-Known Member
Hey there. My Crafty is on its way to me, and I cant wait to test it. However it comes without a charger/power supply (its a used Crafty from eBay), so I need to get one. Which ones work for the Crafty? Will my Samsung phone charger be able to do it?
 

Cashew

Well-Known Member
Hi I don't have time to comb through all these posts so forgive me. I was just wondering what the best website is to purchase a crafty that will honor the warranty. eBay has the best price for a brand new one but I'm a little leery. Any advice?
 
Cashew,

t-dub

Vapor Sloth
I was just wondering what the best website is to purchase a crafty that will honor the warranty.
S&B has been very good at honoring warranties even if the unit is purchased second hand and there is no proof of purchase. E-bay has not been a problem from what I have read here. It seems as long as you have a genuine unit with a good serial# they will do warranty work. The only thing on E-bay is you want to make sure you are getting a real Crafty, not a knock off, and a new one that hasn't been used.
 

whatitdew

Vapes R Great
Hi I don't have time to comb through all these posts so forgive me. I was just wondering what the best website is to purchase a crafty that will honor the warranty. eBay has the best price for a brand new one but I'm a little leery. Any advice?

Email Randy @ puffitup.com and you get a really good price and unbeatable customer service.

I'm in Canada and still purchase from puffitup since I know I Will be looked after!
 

Cashew

Well-Known Member
Thanks for the tips guys. Is there anyway to tell if it's a real one or a knock off on eBay?
 
Cashew,

Testiclees

New Member
Hey there. My Crafty is on its way to me, and I cant wait to test it. However it comes without a charger/power supply (its a used Crafty from eBay), so I need to get one. Which ones work for the Crafty? Will my Samsung phone charger be able to do it?

Standard USB charge cable. I use the one that came with my Samsung S5 mini.
 

t-dub

Vapor Sloth
Thanks for the tips guys. Is there anyway to tell if it's a real one or a knock off on eBay?
Although the knock-off threads here address the Mighty we can take a few cues from this. First make sure the hologram is on top of the cooling unit with the Crafty logo. Second, make sure the o-rings are the proper color. Third, get the serial# of the unit you wish to purchase and call S&B to find out if its real or not. The unit should have the proper factory "sticker" on it with this info. Get as many pics as you can of the box and accessories and make sure you are getting a factory sealed unit that has everything in it.
 
Last edited:

ktmstick

Well-Known Member
I purchased my mighty from eBay and have been very happy, I emailed the seller first asking when they received their order from s&b to ensure it was the latest version. For crafty you can message and ask them if they have the latest firmware on them.
 
ktmstick,

MyCollie

Well-Known Member
Although the knock-off threads here address the Mighty we can take a few cues from this. First make sure the hologram is on top of the cooling unit with the Crafty logo. Second, make sure the o-rings are the proper color.

I bought a Mighty direct from s&b. The o-rings on the vape look like o-rings that have been associated with the counterfeit/fakes, but the spare parts I ordered are the lighter/softer looking blue color. I read somewhere that S&B is using different colored o-rings now.
 
MyCollie,

t-dub

Vapor Sloth
I bought a Mighty direct from s&b. The o-rings on the vape look like o-rings that have been associated with the counterfeit/fakes, but the spare parts I ordered are the lighter/softer looking blue color. I read somewhere that S&B is using different colored o-rings now.
Yes that is true. I was only giving some basic guidelines as to what we have seen as far as regular and counterfeit units. If you wish to write the be-all end-all Crafty/Mighty knock-off thread be my guest.
 
t-dub,

ChooChooCharlie

Well-Known Member
I'm impressed with S&B support. RMA process is very smooth, improved from last year. Mailing label provided, no charges, no hassle. Very pleased. Especially pleased with the $0 invoice. Was expecting to pay $70 battery replacement fee, but they sent me a new unit. Do you folks suppose S&B use the onboard stored data and run the numbers (hours, age, charge cycles, etc?) to determine if a unit merits a fee charged or not? My unit was still working, but vibration was intermittent and warmup times were suddenly slowing down. Applied for RMA at 77 hours, one year old.

Different topic, on emptying capsules: Unfortunately, my latest herbal acquisition has an odd texture and wants to remain in the capsule when I try to dump it. After removing lid, if it doesn't empty easily, use that lid with a scooping motion into the stuck ABV puck -- disrupts/dislodges enough to then tap and blow out.
 

TheVaporist

Man is a universe within himself
I'm impressed with S&B support. RMA process is very smooth, improved from last year. Mailing label provided, no charges, no hassle. Very pleased. Especially pleased with the $0 invoice. Was expecting to pay $70 battery replacement fee, but they sent me a new unit. Do you folks suppose S&B use the onboard stored data and run the numbers (hours, age, charge cycles, etc?) to determine if a unit merits a fee charged or not? My unit was still working, but vibration was intermittent and warmup times were suddenly slowing down. Applied for RMA at 77 hours, one year old.

Different topic, on emptying capsules: Unfortunately, my latest herbal acquisition has an odd texture and wants to remain in the capsule when I try to dump it. After removing lid, if it doesn't empty easily, use that lid with a scooping motion into the stuck ABV puck -- disrupts/dislodges enough to then tap and blow out.

I agree, their recent rma process is way better than before!
For your battery, S&B can effectively see onboard's data, number of cycle, higher temperature etc etc but if you are an EU(or Australian folks) resident, battery are covered by the warranty.
But for US citizen battery are wear and tear and not covered, although it seems to have a 80 hours limit for replacing the battery under warranty for US citizen (not sure about that but I read it here, s&b doesn't reply to that question in my mail).
 
Last edited:

ChooChooCharlie

Well-Known Member
This group of seven orphaned CU's are being prepared to meet their new Crafty father. Exciting for the four CU's who were purchased separately, but I'm sure it's different for the other three who had real Crafty fathers once. I reassure them by explaining how their fathers became tired and needed a vacation.

Let's listen in:

"Relax folks, your hologram locking caps are safe. They will be returned to you after your iso bath. Pardon these vinyl gloves while I separate your sticky halves. Yeah, I feel your pain, little O-rings. Especially you medium sized ones on the locking stem. I know you've been mistreated, not pushed and prodded down far enough. Yes, O-rings, I went to the Storz-Bickel site and looked through the FAQ pages like you told me. You were right, here is their PDF picture of proper installation:

http://www.storz-bickel.com/media/pdf/How-to-place-the-Cooling-Units-inner-o-rings.pdf

I'll try to do a better job with your descendants when you get too tired. And, no, to the rest of you O-rings, I won't be taking you off. You'll soak in place. All right, everyone in the tub!"


cpyex5Tl.jpg


Just a ziplock bag with iso, dunked in very hot water. I cheat and use one of those instant hot water taps - you can see it in the sink. When taking bag out to shake and swish around, be careful how you hold the bag; the iso in ziplock is hot. 5-10 min is fine.

Ziegfeld took over directorial duties for the final drying scene.

If you don't care about reclaiming, and want an easy to clean vape, the Crafty seems pretty easy to me. Suggestion: Use capsules and buy extra CU's for weekly rotation. Group bath time once a month or so, Japanese style.
 

Cashew

Well-Known Member
Holy crap. Just used my new crafty for the first time and got stupid on 4 hits compared to like 12-14 on the arizer air which was way harsher. I currently own the solo, air, firefly, herbal aire, and have tried the pax and ascent. I just used it once but it's amazing. I got tired of the feeling of having to suck a milkshake threw a straw with the air/solo. Worth every penny so far and I can deal with the battery/warranty issues later that I have read so much about

Also it is way lighter then I expected. Kind of feels cheap but as long as it performs like it did the first time no complaints here
 
Last edited:

CRvapes

Member
Today before taking my second draw, I saw a yellow light blink before my eyes then instantly switched to green meaning ready & i had a nice lovely session.

I can't wait for this unit to give up. I got 30 hours already in -2 months & I am really waiting to get it replaced for a mighty. Battery is just sad.

Anyways, I tested it afterwards, had 2 more sessions and no yellow light. Working excellent and producing great vapor.

I am starting to become upset it won't give up anytime soon.

Version 2.10

P.S CFX will be delivered Wednesday to me as my backup cape.
 
CRvapes,

greenextinguisher

Well-Known Member
Holy crap. Just used my new crafty for the first time and got stupid on 4 hits compared to like 12-14 on the arizer air which was way harsher. I currently own the solo, air, firefly, herbal aire, and have tried the pax and ascent. I just used it once but it's amazing. I got tired of the feeling of having to suck a milkshake threw a straw with the air/solo. Worth every penny so far and I can deal with the battery/warranty issues later that I have read so much about

Also it is way lighter then I expected. Kind of feels cheap but as long as it performs like it did the first time no complaints here

I had the same impression of the lightness. The device does feel plasticky, because, well, its made of plastic. That's the one thing I don't like about it: the feel and taste of plastic. I'd especially appreciate some reinforcement around the wear point on the body (where the CU attaches). I knew this going in and it was the main point of deliberation between the crafty and the haze v3. I still ultimately wanted the crafty a little more.

Once you get in a session, that kind of thinking goes away for a while. hahah

After a week, I have no problem finishing a capsule on my own. The first hybrid I was sampling was pretty intense. :)

I really really like this little powerhouse.
 

dunwich

Well-Known Member
Ok so ive tried going through all the pages here to find answers to my questions, but im still only at page. 94 after spending so many hours reading and reading, and I need a quick answer so forgive me if this has been asked before.

1) My Crafty seems to be charging very slow with my Samsung charger (maybe 4 hours or so). The Samsung charger says output: 5.0V = 0.7A. Can I get a more powerful charger which will get the job done faster?

2) I need a Powerbank. Does all powerbanks work with the Crafty? If you have any suggestions it would be great - I dont need a huge one, just a few recharges would be great. On the first 93 pages of the thread this one has come up a couple of times: https://www.amazon.co.uk/gp/product/B00H9BEC8E/ref=od_aui_detailpages00?ie=UTF8&psc=1
But page 94 is like 1½ year old so a lot could've happened since.

3) Cleaning. Using alcohol, is this safe to vape?
 
dunwich,
Top Bottom