... Of course, your post made me try to find the ideal screen to put directly on the CU
I previously used the liquid pad in place of the CU screen
Crafty/Crafty+ by Storz & Bickel
- Thread starter Roger D
- Start date
... Of course, your post made me try to find the ideal screen to put directly on the CU
I previously used the liquid pad in place of the CU screen
vapviking
Old & In the Way
HellsWindStaff
Dharma Initiate
Got an end of year bonus today....daddy wants a new toy but is having troubles justifying this especially having the Mighty. The idea of having desktop quality hits in my pocket seems very awesome though
I'm mulling on it. Think I'm going to the casino with some mates today, which should firmly make a decision for me by the end of the night
I'm mulling on it. Think I'm going to the casino with some mates today, which should firmly make a decision for me by the end of the night
JayDay
Newbs
Ive been playing alot of online poker and someone just recognized my picture which was the crafty lol.
Just a few updates, just got my crafty about a month ago clocking about 46 hours and it hasnt shown any slower heat up time. But ive been using much of my battery staying on higher temps for too long, vaping the oil i collect from my CU. Hopefully that doesnt degrade the life of my Crafty. Anybody else staying too long at boost?
Just a few updates, just got my crafty about a month ago clocking about 46 hours and it hasnt shown any slower heat up time. But ive been using much of my battery staying on higher temps for too long, vaping the oil i collect from my CU. Hopefully that doesnt degrade the life of my Crafty. Anybody else staying too long at boost?
vapviking
Old & In the Way
I used to get overheating messages from the app, and sometimes the Crafty would shut down until it cooled a bit. (light would blink as if battery was depleted, but it could power on again after a few minutes. Had 3 Craftys. Now, Mighty shows none of that behavior (at 2-1/2 months of all day use).
biohacker
HREAM
Consider yourself lucky.... hard for me to believe myself, but it would be great if you could let us know the time from 20c to 180c. If it's longer than a couple of minutes it has slowed.
DNA
New Member
0. Is 50mg of DMT placed on the Liquid Pad for someone comfortable with the experience a good starting point? Is that all you do, place DMT on the Liquid Pad and turn the Crafty on?
1. What sub $50 milligram scale do you recommend to measure DMT?
2. Until a milligram scale can be secured, perhaps empty-capsules sold at vitamin stores can be used instead seeing as NO STORE in town carries milligram scales accurate below 0.1g which is 100mg (way too much). Which empty capsule size could be used to measure DMT?
3. What temperature should the Crafty be set on for DMT, 150°C, 180°C?
1. What sub $50 milligram scale do you recommend to measure DMT?
2. Until a milligram scale can be secured, perhaps empty-capsules sold at vitamin stores can be used instead seeing as NO STORE in town carries milligram scales accurate below 0.1g which is 100mg (way too much). Which empty capsule size could be used to measure DMT?
3. What temperature should the Crafty be set on for DMT, 150°C, 180°C?
UnshavenFish
Well-Known Member
Not something I've used before and it's not really been discussed here that I know of.
You might get more response asking here...
http://fuckcombustion.com/threads/dmt-vaporization.387/
Or maybe the answers you need are already there, either way welcome to FC and good luck
Vapoz
Well-Known Member
Little update from me, 66 hours and still going strong, tough the housing broke and I cant use my vapefiend wpa. Today I cleaned the whole inside screen with the Mr.Proper thingy, looks like new!
Not using the Crafty as I used too because I bought an E-Nano as my desktop vape, I'm using the Crafty only outdoors and when I'm chilling downstairs.
Not using the Crafty as I used too because I bought an E-Nano as my desktop vape, I'm using the Crafty only outdoors and when I'm chilling downstairs.
UnshavenFish
Well-Known Member
Personally I just take my CU (cooling unit/top piece) apart and soak it in 99.8% ISO for 30-45 mins then rinse with warm water, and from time to time a little magic eraser on the bowl when dirty.
This is after use with herb but I guess cleaning after DMT would be the same process, but as I've never used it I'm just guessing here.
Last edited:
justcametomind
Well-Known Member
Does it smell so bad after DMT?
salivape
Well-Known Member
Yes. I've never smoked DMT but I have smelled a pipe that was used for that purpose. Disgusting.
ean
Well-Known Member
Whenever you use dmt out of anything. The piece usually keeps sone of that molecule smell. It woukd be better to use it out of a vape you done use much, or just to dab it on a nail or a little pen.
DNA
New Member
Thank you for that excellent video link.
He says the top screen pretty much has to be replaced instead of cleaned because once you take it out it bends, irreparably. So it was a good idea to order those extra screens from the manufacturer but who else sells these minor parts affordably? And how often are they really to be replaced for DMT-only use?
What percentage rubbing alcohol should be used, if it matters?
DMT will be using the liquid pad every time, he recommends simply soaking the liquid pad in rubbing alcohol, how often should this be soaked for DMT use, and how often replaced for DMT-use only? Since DMT will make use of it every time... would you soak te liquid pads in rubbing alcohol after each use? For an hour, two?
Looking for educated guesses to these DMT-related questions, I know most discussion is centered on uses for 'other'.
Did not order the O rings, how can you tell *when* those need to be replaced? I mean this all heavily depends on frequency of device use, so it's really the number of uses, vs. time, isn't it?
He says the top screen pretty much has to be replaced instead of cleaned because once you take it out it bends, irreparably. So it was a good idea to order those extra screens from the manufacturer but who else sells these minor parts affordably? And how often are they really to be replaced for DMT-only use?
What percentage rubbing alcohol should be used, if it matters?
DMT will be using the liquid pad every time, he recommends simply soaking the liquid pad in rubbing alcohol, how often should this be soaked for DMT use, and how often replaced for DMT-use only? Since DMT will make use of it every time... would you soak te liquid pads in rubbing alcohol after each use? For an hour, two?
Looking for educated guesses to these DMT-related questions, I know most discussion is centered on uses for 'other'.
Did not order the O rings, how can you tell *when* those need to be replaced? I mean this all heavily depends on frequency of device use, so it's really the number of uses, vs. time, isn't it?
Stinky
Well-Known Member
Try using a warm water bath with the ISO soak. It makes a noticeable difference with cleaning. I just leave my jar in the water bath.
Don't use rubbing alcohol. Some rubbing alcohol contains perfume so that it isn't consumed. Use 99.8% Isopropyl alcohol.
The top screens are definitely reusable. I have never replaced mine and they are a year old now.
Pablo13
Well-Known Member
Well I took the plunge and ordered myself one of these and it turned up last Wednesday. Already up to 5 hours 
Coming from a desktop Extreme Q, this is my first portable and I'm impressed. It was down to the Crafty and the Grasshopper, and while the GH is an impressive bit of kit it has a bit of an unfinished feeling about it which has steered me clear of it for now. Reading this thread I'm fully expecting the crafty to fail down the line at some point. Maybe when I get to the Crafty 70 hour danger zone it might be worth looking a GH then while my crafty gets sent away. For now I am extremely happy with the design form, function and clouds of the Crafty
Coming from a desktop Extreme Q, this is my first portable and I'm impressed. It was down to the Crafty and the Grasshopper, and while the GH is an impressive bit of kit it has a bit of an unfinished feeling about it which has steered me clear of it for now. Reading this thread I'm fully expecting the crafty to fail down the line at some point. Maybe when I get to the Crafty 70 hour danger zone it might be worth looking a GH then while my crafty gets sent away. For now I am extremely happy with the design form, function and clouds of the Crafty
UnshavenFish
Well-Known Member
Stinky
Well-Known Member
That's the highest number I have ever seen. You are the Crafty King!
Where does the time go?
UniqueCrafty
☆☆☆☆
Crazy, im stunned, good job!
Can you tell us how you charge your crafty ?
Drain the battery completely and charge it to 100 ?
UnshavenFish
Well-Known Member
I doesn't make any difference for @Vambo1980 as he can just swap his battery whenever he wants, there is no secret way to charge to achieve his numbers, he's just a clever guy (and braver than me as his crafty was still in warranty
) that has made his crafty into what it should have always been, after it broke 
If I remember right when his stopped working it was showing the most common failure/symptoms maybe s&b could learn a thing or two from him.