Core 2.0 - Divine Tribe/SZ Crossing
- Thread starter BabyFacedFinster
- Start date
kegstandman420
Well-Known Member
Hey I have that recycler. You have to fill the water to where the glass from the intake tube meets the actual tube. You need a little more water and it will recycle I thought the same at first.Cups and recycler (though I don’t see much recycling) have arrived! Decent glass top for $60. Comes solidly packed in a cardboard box with foam insert. Atomizers are solid in construction, though the bucket does have a bit of movement when qtipping. Bought two, so I’m gonna throw one on a mod to see if resistance fluctuates at some point. I can foresee oil getting between the bucket and the metal housing, especially if one were to rip fairly hard and cause the oil to creep up. My second hit in the video I pulled harder to see if I could get some water recycling and oil had deposited on top of the metal housing.
Core 2.0 recycler top and new 2.1 bucket
Watch "Core 2.0 recycler top and new 2.1 bucket" on Streamable.streamable.com
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Perhaps I will join you if I can and the deal is right, this always seems like the best one of these to me, and now with some stock recycler glass much more appealing...
RustyOldNail
SEARCH for the treasure...
Instead of buying any of the larger glass bubblers now offered for the Core-2, I’m thinking of getting the 14mm male glass adapter.
I can then use the 14mm female DT Hubble Bubbler, as the stock glass has a vertical “trumpet” mouthpiece, both things I dislike.
Easy to clear vapor by pulling the DT HB right off. And the HB has a decreased diameter, right angle MP, perhaps my favorite small 14mm female bubbler.
Of course any water attachment that has a 14mm female joint would work, or using adapters, which I avoid using. For those that like silicone tubing, you could connect to just about anything….
You can find the Core-2 to 14mm glass adapter in the drop down menu:
ineedhemp.com
It’s less $$$ at the partner site, but it doesn’t list the SIZE of the male post 14/18?
I can then use the 14mm female DT Hubble Bubbler, as the stock glass has a vertical “trumpet” mouthpiece, both things I dislike.
Easy to clear vapor by pulling the DT HB right off. And the HB has a decreased diameter, right angle MP, perhaps my favorite small 14mm female bubbler.
Of course any water attachment that has a 14mm female joint would work, or using adapters, which I avoid using. For those that like silicone tubing, you could connect to just about anything….
You can find the Core-2 to 14mm glass adapter in the drop down menu:
Replacment Glass Tops for The Core 2.0 eRig - Divine Tribe
Now you can use your Core 2.0 with a different style glass top including the Recycler, Flat Matrix Perc, Round Matrix/Straight Perc or the Stock Top.
ineedhemp.com
It’s less $$$ at the partner site, but it doesn’t list the SIZE of the male post 14/18?
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Instead of buying any of the larger glass bubblers now offered for the Core-2, I’m thinking of getting the 14mm male glass adapter.
I can then use the 14mm female DT Hubble Bubbler, as the stock glass has a vertical “trumpet” mouthpiece, both things I dislike.
Easy to clear vapor by pulling the DT HB right off. And the HB has a decreased diameter, right angle MP, perhaps my favorite small 14mm female bubbler.
Of course any water attachment that has a 14mm female joint would work, or using adapters, which I avoid using. For those that like silicone tubing, you could connect to just about anything….
You can find the Core-2 to 14mm glass adapter in the drop down menu:
Replacment Glass Tops for The Core 2.0 eRig - Divine Tribe
Now you can use your Core 2.0 with a different style glass top including the Recycler, Flat Matrix Perc, Round Matrix/Straight Perc or the Stock Top.
It’s less $$$ at the partner site, but it doesn’t list the SIZE of the male post 14/18?
Thank you that sounds even better for me, I would use an adapter and try to rig it up to a regular recycler, I do have hydro tubes but I don't really want to dab with them as much... Agreed about the mouthpiece on the stock incycler! I'd also prefer a separate recycler and drain and a more simple perc personally
kegstandman420
Well-Known Member
That's what I do. Had a buddy make a 10mm male that plugs into whip and then a 14mm female to the whip and Ive been using my core and my v5 on the cub on all my mini rigs. Get a little 14mm nectar collector and you have a dry rig.
I cleaned one of my Core 2 atomizers, cup and all, in 99% ISO at the same time as my Puffco Proxy atomizer, but just read I shouldn't have done that. (was a day ago now as I switched to another atomizer so it would have ample time to dry after cleaning)
Do you think this is still safe to use? Apparently not supposed to clean the outside of the cup nor the ceramic spacer pieces on the atomizer in ISO ....
Do you think this is still safe to use? Apparently not supposed to clean the outside of the cup nor the ceramic spacer pieces on the atomizer in ISO ....
biohacker
H.R.E.A.M
Sz Crossing - CrossingTech on Instagram: "The TUG has arrived and is now in stock @discountenails in the US with more on the way to other retailers! With a tall 3D ceramic heater and four heat settings the TUG is an ideal device for people who want
180 likes, 27 comments - crossingtech on April 6, 2023: "The TUG has arrived and is now in stock @discountenails in the US with more on the way to other retailers! With a tall 3D ceramic heater and four heat settings the TUG is an ideal device for people who want an easy to use, powerful and...
www.instagram.com
Looks like it's out now!
I'll be picking one of these up when they get to the Herb Cafe (or maybe sooner)Sz Crossing - CrossingTech on Instagram: "The TUG has arrived and is now in stock @discountenails in the US with more on the way to other retailers! With a tall 3D ceramic heater and four heat settings the TUG is an ideal device for people who want
180 likes, 27 comments - crossingtech on April 6, 2023: "The TUG has arrived and is now in stock @discountenails in the US with more on the way to other retailers! With a tall 3D ceramic heater and four heat settings the TUG is an ideal device for people who want an easy to use, powerful and...
Looks like it's out now!
biohacker
H.R.E.A.M
I'll be picking one of these up when they get to the Herb Cafe (or maybe sooner)
They were just posted there and on sale!
Just realized it's not the same atomizer as the Core2 w/ the V5 heater. So couple things ...
The different heater though will have me holding out for a bit on this one ...
- It looks smaller
- It's not rebuildable; however, replacement cost of $30CAD is not bad, so that maybe mitigates it as they do last long (at least the Core2 ones do). The other concerning part about this though is the v5 heaters can't be soaked (or shouldn't) in ISO, so not sure these will be able to be soaked in ISO which will make them difficult to get completely clean between the atomizer and housing etc. (since can't be soaked and can't be disassembled)
The different heater though will have me holding out for a bit on this one ...
biohacker
H.R.E.A.M
What happened with this?
It was fine. Let it dry out for a day or two to be safe.
I can't afford a proxy, and did not use my Core 2.0 much. I am going to snag the TUG as it looks like it will suit my usage.
It's between the TUG and the other unit from JC. I have been watching @JCat and @biohacker for their opinions. Thanks! and Cheers!
It's between the TUG and the other unit from JC. I have been watching @JCat and @biohacker for their opinions. Thanks! and Cheers!
biohacker
H.R.E.A.M
No don't do that brother, the Core 2 is better than the Tug! Go with the Pockety!!! Proxy is cheaper though I think.
BabyFacedFinster
Anything worth doing, is worth overdoing.
Most folks on the discord say to stick with the Core 2 over the Tug.
I am thinking of a Proxy for fun, but I will always have a Core at my disposal.
I am thinking of a Proxy for fun, but I will always have a Core at my disposal.
biohacker
H.R.E.A.M
I've been thinking about this some more, and think it would be wise to ask you why you did not use your Core 2 much? How do you think the Tug would suit your usage better?
Ariwe
Well-Known Member
Hey all! Just got my Dabtech Duvo X – which according to Reddit is just a rebranded Core 2.0. I got it with the additional mouth piece recommended by @zikzak for a total of $157 shipped.
I tried it for the first time last night – turned it on, set it to blue, double clicked for session and waited till the vibration to inhale. Worked well! Didn't get huge clouds but I only use rice size amounts of rosin.
Wondering other peoples techniques? I saw a post on Reddit saying "Double click wait til the buzz. Click off. Double click wait til it’s just about to buzz and drop dab in. Cap and rip." Does this make any difference?
I tried it for the first time last night – turned it on, set it to blue, double clicked for session and waited till the vibration to inhale. Worked well! Didn't get huge clouds but I only use rice size amounts of rosin.
Wondering other peoples techniques? I saw a post on Reddit saying "Double click wait til the buzz. Click off. Double click wait til it’s just about to buzz and drop dab in. Cap and rip." Does this make any difference?
RustyOldNail
SEARCH for the treasure...
I thought about SIC awhile ago, but the replacement ceramic cups clean up so well, and are cheap enough that I didn’t want to bother with adding another internal cup, seemed like potentially more work to maintain….
TangibleHangnail
Well-Known Member
Folks on the dtv5 discord say inserts are a waste of money for the v5 heaters, they just make your temp control more difficult
BabyFacedFinster
Anything worth doing, is worth overdoing.
Agreed. I find the ceramic bucket works just fine for me without the need of any insert.
And BTW, I've been using the same heater/bucket for more than 6 months and it still cleans up with nothing more than a dry qtip if you swab right after using.
BabyFacedFinster
Anything worth doing, is worth overdoing.
Hi folks,
Been a minute since I've posted to this thread. I had a second and thought I'd add a few updates. Amazingly, I still have not needed to buy a Core 2 of any kind. My highly modified Core 1 is still going strong, with the battery still holding a charge through multiple sessions. I use the damn thing every day and only need to charge it every 2 weeks or so.
Anyway, they now have a 2.1 version that includes a non-rebuildable V5 cup. Not quite sure how this is an upgrade from the regular V5 Core cup, and there is a 2.2 version where the lip of the ceramic cup is a smidge taller than the metal housing. This allows you to wipe your dabber off on the edge of the cup without getting concentrate in between the cup and the housing.
On DT's discord, there is some talk of a Core 3 on the horizon, Not quite sure of all the upgrades, but one thing they were discussing is a switch to Replaceable 18650's! That would be one hell of an upgrade! I will update if I hear anything new.
Finally, for those looking for new glass options. There have been a number of recyclers that have become available on DT's website. Besides the recyclers, there is a new cone shape that mimics the Peak.
ineedhemp.com
and on other sites, such as HVT and discountenails.com, such as these
discountenails.com
I really like the larger version here. The cost is quite reasonable, but I do hear that it adds some height and weight to the overall footprint. I might be pretty happy with my older flat top perc design for now.
So there you go. I'll end with a somewhat recent review of the Core 2 by Cewpins. He certainly vapes a lot and has a lot of positive feedback on the Core. Be well!
Been a minute since I've posted to this thread. I had a second and thought I'd add a few updates. Amazingly, I still have not needed to buy a Core 2 of any kind. My highly modified Core 1 is still going strong, with the battery still holding a charge through multiple sessions. I use the damn thing every day and only need to charge it every 2 weeks or so.
Anyway, they now have a 2.1 version that includes a non-rebuildable V5 cup. Not quite sure how this is an upgrade from the regular V5 Core cup, and there is a 2.2 version where the lip of the ceramic cup is a smidge taller than the metal housing. This allows you to wipe your dabber off on the edge of the cup without getting concentrate in between the cup and the housing.
On DT's discord, there is some talk of a Core 3 on the horizon, Not quite sure of all the upgrades, but one thing they were discussing is a switch to Replaceable 18650's! That would be one hell of an upgrade! I will update if I hear anything new.
Finally, for those looking for new glass options. There have been a number of recyclers that have become available on DT's website. Besides the recyclers, there is a new cone shape that mimics the Peak.
Replacment Glass Tops for The Core 2.0 eRig - Divine Tribe
Now you can use your Core 2.0 with a different style glass top including the Recycler, Flat Matrix Perc, Round Matrix/Straight Perc or the Stock Top.
ineedhemp.com
and on other sites, such as HVT and discountenails.com, such as these
Search: 5 results found for "core recycler"
Discount E-Nails offers the largest variety of desktop enail kits, portable enails, e-rigs, quartz and titanium enails, and much more. Click here to browse our dab items!
So there you go. I'll end with a somewhat recent review of the Core 2 by Cewpins. He certainly vapes a lot and has a lot of positive feedback on the Core. Be well!
Last edited: