Cheap High Quality Bubbler

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Price is on the very expensive side but looks very neat. The seller is Mlglass
What do you think of it?

MLglass is one of the BiaoT stores by the way, and that looked like the quad uptake floating klein recycler, which yeah would have more restriction, even the dual is a bit restrictive to me so I prefer single uptake... They sell these at Greek Glass

Thanks is this considered an incycler? As I received it past week and I am not so familiar with glass pipes
bongo-podwojny-rewolwer-28-cm-4-mm.jpg

No, not at all, this is a double tree perc rig, the first one is a shower head and the second one is a mushroom, no recycling

Have had this in my cart for a while now. Interested in the stem/perc six shooter aspect. Anyone tried one of these? Think it’s pretty open draw?

https://m.dhgate.com/product/dfx-05-glass-bong-smoking-water-pipe-with/396093322.html?invitationCode=ff8080816eea802f016f4015d75b0671|-|396093322

There are people that like this one and the OG version it is knocking off, I wouldn't think it to be pretty open draw but it probably isn't so restrictive either, looks like only a few slits in the tree and depends on your mouthpiece that one doesn't look airy
 
Last edited:

Abele Rizieri Ferrari

Well-Known Member
Thanks is this considered an incycler? As I received it past week and I am not so familiar with glass pipes
bongo-podwojny-rewolwer-28-cm-4-mm.jpg
I mentioned some here:
Post in thread 'Cheap, high-quality bubbler??'
https://fuckcombustion.com/threads/cheap-high-quality-bubbler.5255/post-1696044

I think for your use with Anvil and DV you'll enjoy the straight can with FOL perc I got from CB:


Iirc I shared a function video in the anvil thread
 

condition

Well-Known Member
I mentioned some here:
Post in thread 'Cheap, high-quality bubbler??'
https://fuckcombustion.com/threads/cheap-high-quality-bubbler.5255/post-1696044

I think for your use with Anvil and DV you'll enjoy the straight can with FOL perc I got from CB:


Iirc I shared a function video in the anvil thread
I saw the video, is it available only from California?
 
condition,

Haze Mister

Verdant Bloomer
Manufacturer
For what it's worth: I only look at bubblers where the intake tube goes straight into water, so the hot vapor doesn't hit any glass before entering the water. This is to preserve flavour and reduce the need to clean that tube all the time. I think the more contact with glass, and the more fine the diffusion is, the less flavour in general.
Dry pieces are not suitable for chronic use IMO because water will filter stuff you do not want in your lungs every day for years.​
 
Haze Mister,
  • Haha
Reactions: Petetbay

Abele Rizieri Ferrari

Well-Known Member
For what it's worth: I only look at bubblers where the intake tube goes straight into water, so the hot vapor doesn't hit any glass before entering the water. This is to preserve flavour and reduce the need to clean that tube all the time.​
How does that work? You still drop your vape with wpa in a glass downstem, right? But the vapor does enter the water with only natural diffusion.

I think the more contact with glass, and the more fine the diffusion is, the less flavour in general.


I don't think contact with glass strips away flavor, glass is excellent for flavor retention. But water ime does and when the diffusion gets more aggressive this will even worsen.

Dry pieces are not suitable for chronic use IMO because water will filter stuff you do not want in your lungs every day for years.

I don't worry about this myself, but water filtration isn't always more effective than dry glass. The straight angled j hook and Prophet dry piece are excellent at filtering debris, better even than some water pieces. Also I think it's hard to tell what's best practice without any research on the subject. For example I wouldn't be surprised if the effects of structurally inhaling possibly a bit nasty water is similarly detrimental to the lung health.
 

Abele Rizieri Ferrari

Well-Known Member
You mean which color I guess, because you linked to the straight can model, then the clear black or smth.

Discount? :mad:
You can use the code CB30 for 30% off. Contact them on via mail or insta, they respond quite quickly. They might be able to sort you out.

There is a color selection option I believe, but most were out of stock last time I checked.
 

redrum891

Well-Known Member
Last edited:
redrum891,
  • Like
Reactions: LesPlenty

Haze Mister

Verdant Bloomer
Manufacturer
How does that work? You still drop your vape with wpa in a glass downstem, right? But the vapor does enter the water with only natural diffusion.
I mean it is better IMO if, after exiting the bowl / banger /nail, the vapor goes down a straight stem into water rather than hitting a dry glass corner first.

None of this is scientifcally tested by me but I have a background in science and just making educated guesses. The terpenes seem lighter than the cannabinoids but I am guessing they are more likely to stick to the glass rather than water as they are still oils after all. Once they are in the water they are inside an air bubble and should not get lost in the water (too much). Basically my theory is: The more bends and corners in the airpath, the less flavour. And same goes for lots of diffusion (fritted percs/lots of fine bubbles) as most people seem to agree with.
 
Last edited:

Grass Yes

Yes
Staff member
I mean it is better IMO if, after exiting the bowl / banger /nail, the vapor goes down a straight stem into water rather than hitting a dry glass corner first.

None of this is scientifcally tested by me but I have a background in science and just making educated guesses. The terpenes seem lighter than the cannabinoids but I am guessing they are more likely to stick to the glass rather than water as they are still oils after all. Once they are in the water they are inside an air bubble and should not get lost in the water (too much).
This is literally the opposite of my experience and most people I know. Glass steals almost no flavor and water takes a lot.
 

Haze Mister

Verdant Bloomer
Manufacturer
This is literally the opposite of my experience and most people I know. Glass steals almost no flavor and water takes a lot.
OK, I am not comparing bubblers to dry pieces for flavour- i was talking about bubbler design really. added this to the comment:

Basically my theory is: The more bends and corners in the airpath, the less flavour. And same goes for lots of diffusion (fritted percs/lots of fine bubbles) as most people seem to agree with.

I mean , we've all seen the oil stick and accumulate in corners nearest the bowl (or quartz banger elbows) very quickly. That's basically what I don't want.
 
Last edited:

coolbreeze

Well-Known Member
Basically my theory is: The more bends and corners in the airpath, the less flavour. And same goes for lots of diffusion (fritted percs/lots of fine bubbles) as most people seem to agree with.
I totally get your reasoning, and I think this is true as well of cooling, but the Prophet disproves this to some degree--it's dry, nothing but angles, and very flavorful. Something else is at play?
 

Haze Mister

Verdant Bloomer
Manufacturer
Probably because there are no narrow choke points and just enough cooling.

Nobody's mentioned the rattle can in a while.. that was quite tasty with minimal bends and minimal water filtering but maybe not enough cooling for anything bigger than a Dynavap.
 

redrum891

Well-Known Member
I'm surprised there's no real science behind figuring it out in a cool youtube video lmao...

idk, im a noob....before vaping i looked at it as, longer/bigger the bong the more it has to cool down the smoke and small bubblers for dabs.

being here and vaping, too much diffusion kills flavor, not sure though on more water = more cooling? but less water it hits the glass more which is more flavor? my klein seemed to act that way.

if anyone wants to break down anything wrong, please do! I think these are more of the basic fundamentals for noobies like me? idk...im putting myself out here to look stupid, lmk xD
 
redrum891,

Abele Rizieri Ferrari

Well-Known Member
I cleaned my water pieces today and started using distilled water :) hope it'll help keep my glass even cleaner. Noticed that both my new CB pieces with the FOL perc take less time to stain and get the chalky build up, so that pushed me over the edge to convert.

Nobody's mentioned the rattle can in a while.. that was quite tasty with minimal bends and minimal water filtering but maybe not enough cooling for anything bigger than a Dynavap.

Maybe this:




PG5212.jpg


 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I mean , we've all seen the oil stick and accumulate in corners nearest the bowl (or quartz banger elbows) very quickly. That's basically what I don't want.

Yeah and I do want that haha why I'm always using drop down adapters to catch everything and keep the water cleaner... Offers extra cooling and better ergonomics for me too

Maybe this:

As far as I know they are still updating that so it functions properly

Also just discovered this one, which seems to be a cheaper yet still functional version with green accents:

There are a lot of resellers of used glass on eBay too, like this Biao classic style:

A little pricey, but for all you get, shipping within the US, these colors, actually very fair price! I paid $50 shipped for mine in CFL purple without any banger or bubble cap through Reddit though it was brand new (remember eBay has a lot of fees for the sellers)

This is a classic effective style of klein recycler (where the funnel is separate, although not floating as it is still attached) with single uptake and drain (neither are incycler parts, like the one CB linked above has incycler drain for example) plus simple four hole side shower head perc... A little small so ideal for dabbing, though fine for herbs too (and other sellers from DHgate do make larger versions actually as well)

This is the one I tend to prefer though it is functionally the same, it only has three holes in the perc and you see the klein funnel is even more separate, although not floating on top style so the piece is not as narrow and tall, a bit more balanced:
They have other listings with it available in clear as well as other colors with opals more expensive...

Don't forget this decent looking one from eBay as well:

But you might want to forget this crazy one:
Haha curious? Nice colors at least

They also have this pillar incycler:

And these straight fabs... Eh:

Finally whoever it was that was looking for a different style inline to honeycomb:
Pretty wacky one! Some zong lol weird with the honeycomb in that part... so far from the inline perc, might defeat the purpose?
 
Last edited:

redrum891

Well-Known Member
I understand. I do not wish a custom made option, I prefer a small recycler with low (lowest) restriction, from DHGate in order to avoid customs clearance, handling fees and to pay less in purchase price.

function video too
 
redrum891,
  • Like
Reactions: condition

Ariwe

Well-Known Member

Haze Mister

Verdant Bloomer
Manufacturer
Is it the same quality of the ironing water? Dead cheap compared to drinkable bottle water.
Not exactly, but the ironing water will work just as well. Distilled water comes from boiling water and then condensing the steam, which is expensive. Ironing water is de-ionised water and is made with a less natural , more industrial way.
 
Top Bottom