Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Yeah for me it just needs that extra 45° angle adapter to make it more comfortable with my setup, just so many options!
Cheap High Quality Bubbler
- Thread starter Bleezy
- Start date
-
- Tags
- cheap bubbler glass
cybrguy
Putin is a War Criminal
I've been wondering about that. The Goo Roo MP doesn't have much of a bend in it, but the joint on the TAG piece is on the opposite side of the can and may be far enough away to comfortably hit without the vape being too close. I have to use the longer stem with the UFO to keep the vape out of my face.
That would work too, but I don't have one of those...
(I can always count on you to find something else I need)
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I've been wondering about that. The Goo Roo MP doesn't have much of a bend in it, but the joint on the TAG piece is on the opposite side of the can and may be far enough away to comfortably hit without the vape being too close. I have to use the longer stem with the UFO to keep the vape out of my face.
That would work too, but I don't have one of those...
(I can always count on you to find something else I need)
Haha yeah I mean I didn't have one either until I got one from DHgate, but it was like $11 with very fast shipping, seller allaccessary, but yeah if you are holding the piece anyway it shouldn't matter much, in fact it's probably more comfortable to have the mouthpiece facing straight up if you are holding the piece, yeah with the right angle down stem the vapes not going to be in your face anyway, I think you'll be fine!
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
On a less positive note my smokingbong Mobius hasn’t moved since the International Mail Exchange on the 8th.
Considered sending them a message but I don’t know what is normal? Luckily I have the TAG now or I’d be in crisis mode
My last SmokingBong order shipped quick but got stuck at customs, they are helpful by message, but nothing they can do. Offered to refund $6 when it finally arrived or the full amount if it does not actually arrive... I need to call USPS lol my tentacle rig is also lost
Last edited:
Polarbearboy
Tokin' Away Since 1968
At DHGate I ordered two good-sized pieces--a large mobius-type matrix can with sidecar stem and a triple tree perc bubbler--within minutes back in November. I received the shipping notice within a day or two for each. One arrived three weeks later, the other took more than two months to get here. Both pieces impressively packed.On a less positive note my smokingbong Mobius hasn’t moved since the International Mail Exchange on the 8th.
Considered sending them a message but I don’t know what is normal? Luckily I have the TAG now or I’d be in crisis mode
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
BiaoT is doing a discount on a small-mid-sized opal heady gridded inline perc rig with red accents, under $80 only one left here on IG with function video (you comment or message him and get the link for DHgate it will be sold by bongt there) Great deal:
www.instagram.com
唐标 on Instagram: "#discount #opal #stock #bong #glassbong #waterpipe #smoking #smokeshop We will have a long holiday for China New Year.Hahahaha.So we will give some products discount before China New Year.The original price is U$158,you need only p
60 likes, 6 comments - biao.t on January 25, 2022: "#discount #opal #stock #bong #glassbong #waterpipe #smoking #smokeshop We will have a long holiday for China New Year.Hahahaha.So we will give some products discount before China New Year.The original price is U$158,you need only pay...
www.instagram.com
DJ Colonel Corn
The Vapor Ninja
The Divine Tribe Dab Rig
This here is quite a fine bubbler - available at https://ineedhemp.com .
Note: this is not the "Penis" version, this is the other version
stonedmallone
Well-Known Member
So I know this was a minute ago, but I haven't been able to try the vigreux spiked stem until a few days ago because I was waiting for the adapter, and oh my it's absolutely incredible. Thank you so much for the recommendation. I was using the goo roo prior with the tag and that was already great But these are the smoothest hits I've ever had. Now I want to put that stem on every bong possible. This really is a dream set up now. Do you use that stem on any other pieces?
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Originally it was just with my TM, but yeah now it is mouthpiece for TAG and GooRoo, I do have that FC-Mod devastator main can with circ perc, though I don't think I've used it since I got this mouthpiece... Haven't used it in a very long time! Not much else modular
cybrguy
Putin is a War Criminal
This may be useful for some...
www.dopeboo.com
A Visual Guide to Percolators
Have you ever wondered what all the fuss is about with percolators? Before you purchase any water pipe, you’ll probably hear about the perc that’s inside--showerhead, UFO, etc. What exactly are the different kinds of percs and why do they matter? In this guide, we’ll take a deep dive into all...
jbm
Not a Vapman “beta tester”
Likewise. SO well packed. Took a lot of slicing and tearing to get it out of the bubble wrap. It is definitely thick. Ass. Glass. It makes the large inline look like a Baccarat champagne flute.
I recently got a Matrix Sidecar bong from Popular Glass, which I find gives vapor that is a lot smoother on the throat than my Rattle Can from yingmin5.
However, I think that the ergonomics of the Rattle Can are much better for using while lying back on the couch because the neck is at a much flatter angle. That means that you can hold the bong naturally at a slight angle without the water coming out the neck.
With the Matrix Sidecar you have to hold the bong straight up or else the water flows out the angled neck.
Is there a bong with the same great percolator as the Matrix Sidecar but with a neck that is almost flat like the Rattle Can's?
Thanks
However, I think that the ergonomics of the Rattle Can are much better for using while lying back on the couch because the neck is at a much flatter angle. That means that you can hold the bong naturally at a slight angle without the water coming out the neck.
With the Matrix Sidecar you have to hold the bong straight up or else the water flows out the angled neck.
Is there a bong with the same great percolator as the Matrix Sidecar but with a neck that is almost flat like the Rattle Can's?
Thanks
Glorg
Well-Known Member
Picked up the straight neck stemline from dhgate for like 40$ cad shipped with all the holiday coupons. Packaging was seriously on point and the rig is legit, very happy with this one. Stacks bubbles nicely, if they could pull of bending the neck sov style it would be top tier easy, straight neck is fine for me though and really at this price can’t complain. Usual Chinaglass flaws like bubbles in the joints and where the perc is welded on the back is bumped, but at least it’s reinforced. I’ll need more time to confirm it’s function and how much of the perc is actually performing properly but so far I am legit impressed.
I have been looking at this for a while for kicking back as it would be easier to handle than my larger Sidecars, you can ask for them to give you one with a higher angle mouthpiece, pricey though,
Shit Snacks
Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Obsessively checking my shipping status on DH and got a message smokingbong was having a sale…
This looks purdy:
That is what I have, in blue, from Glass99, but it didn't look like the photo, so I also ordered the blue one from SmokingBong, but as I said that is the one that shipped super quick but then got stuck at customs and has just been sitting there so I'm expecting it to get sent back unfortunately... I had showed them the photos I posted in here comparing the two, they told me their photo had the factory model, so that and the price was why I ordered. The one I have is fine, but has a few things I'm not happy with, not as proper.
cybrguy
Putin is a War Criminal
So I used the new TAG Donut last night and I like it. It is very well laid out with the joints on opposite sides of the can so I can use mouthpieces of various sizes comfortably depending on which vape I am using with it. Very thick glass and, by virtue of that, kinda heavy for hand holding. I don't expect to use the whip with it much, and I probably won't use their whip at all because I don't know if it is food safe, but it's size and weight do encourage its use as a tabletop piece.
Glorg
Well-Known Member
Here is a funk video, seems like the perc is working pretty well all the way across. Enano has slightly restricted draw so it should stack better with a elev8r or other fully open shooters.
RustyOldNail
SEARCH for the treasure...
Your hand is blocking the TV.... I was watching, now I don’t know what happened.....
Nice video!
3illmesmart
Active Member
Here's affordable.
25.5cm Tall UFO Bong Hookahs With Headshow Perc Bongs Thick Oil Rigs High Quality Water Pipes Joint Size 18.8mm Saml Glass PG5034FC UFO From Stevenlmz79, $40.46 | DHgate.Com
Here is a place where best hookahs are provided at wholesale prices. The supplier stevenlmz79 carries a good stock of 25.5cm tall ufo bong hookahs with headshow perc bongs thick oil rigs high quality water pipes joint size 18.8mm saml glass pg5034(fc-ufo) with the price as low as &price;.
www.dhgate.com
madhockeydad
Art is beauty
BabyFacedFinster
Anything worth doing, is worth overdoing.
I was watching Troy and Jerry last night and noticed Jerry using his Core erig with a different aftermarket bubbler that seems to fit the Core well. He mentioned that it was once available on IG. I'm not sure of what it's called, but wanted to see if anyone recognized it or had an idea of where to buy one online. The piece can be seen at 15:25 on the video. Thanks for any help.