The more you stretch and deform a coil to fit different applications = the faster to get to errors on the PID. I suggest getting a coil for each different baller you get to save on premature coil failures.
Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer
- Thread starter natural farmer
- Start date
Socks And Sandals
Well-Known Member
Well, I made BF on time this year and was able to get everything I wanted including extra Volcano Bags and a Small Honeycomb stand in black from Delta 3D studios! So excited! I really hope these ruby balls provide an even more efficient vape! Really hope my coil fits the B2 snug because there was always a little wobble with my Vrod and I refuse to mess with the coil. Should be arriving next thursday! Can't wait! 
| ||||||||||
|
Timps27
Feel like I’m winnin’ when I’m losin’ again
Oh snap…look who showed up! First flight was everything I hoped it would be, what a fantastic machine!
GratefulDread
Well-Known Member
What's your guys favorite scoop to use with the Shovelhead bowl?
feralcomprehension
Qualified Observer
Not the ch one; overpriced nonsense. Machining quality is poor and the long narrow scoop is both too small and too narrow.
IMO.
RustyOldNail
SEARCH for the treasure...
The level 1/8th tsp (dash) spoon = .10g
Gigsabits53
Well-Known Member
I use a scoop I bought from RogueGuy. He has some nice stuff on his site at reasonable prices.
710yota
Have you heard about the boom on Mizar 5?
I also use the little dash spoon! If your looking for really fancy premium hardware to go with your really fancy premium vape Old Head has a pretty dope looking one I've read good things about.
oldheadtc.com
*FACTORY SECONDS* Measuring Spoon
Old Head makes tools that are designed to be used, and like any tool you might buy, any given Old Head Measuring Spoon may have an extra tool mark here or a scratch there, but now and then we come across a spoon that's got some excessive blemishes or scratches that get it rejected from retail...
Planck
believes in Dog
For counterpoint;
I like it and see it in plenty of images, so I doubt I'm the only one.
Machining seems fine to me and I'm pretty fussy about.
Different strokes I guess.
Chicken No Name
Dazed and confused
I really like the expensive og head spoon. Feels great in hand and non magnetic.
I find the CH one not so good for anything other than a fine grind despite its popularity in images! It has a tiny scoop.
I find the CH one not so good for anything other than a fine grind despite its popularity in images! It has a tiny scoop.
Thick Vape
In the Ballpark
I plie a joint filter in half and use that.
Those joint filter blocks are great for that and I get them offered free here and then. No need to clean the spoon, just use a new one. It also adjusts to alot of sizes, from the shovelhead to the elev8r bowl or the even the vapcaps. Easy to judge the load.
And it is by far the cheapest spoon around. etc..
Alligator427
Well-Known Member
I use the best tools ever made : my fingers
focalforlife
Well-Known Member
I switched my tbucket pid from a CH branded one to an auber 300 and have noticed the auber seems to run much more hot than the CH. It burnt my concentrates the first time at the same temp. Had to lower it 35 degree's. Anyone else have this experience? Tbuckets are supposed to be in this month. Hoping they release tsunami's soon as well.
Another +1 for the Old Head Spoon.
Another +1 for the Old Head Spoon.
feralcomprehension
Qualified Observer
I know, right? Over hyped.
Check mine- if you're fussy I think you'll agree on the machining. The inside lip had a burr I can't photograph.
Poop scoop
RustyOldNail
SEARCH for the treasure...
If you didn’t buy it directly from CH, it’s possibly one of the Chinese clones I’ve seen?
My CH scoop does not look like the one in your link.
mixchu69
Well-Known Member
When I grabbed a couple of inception jhooks, I grabbed one of these for my BCG
Herb Scoop & Tamp
Beautifully designed by O'Connell himself. Printed in house. material: PLAheight: 53mmtamp size: 18mm or 14.5mmscoop width: 16mm *warning: using in a metal or glass bowl that is very hot could cause the PLA to soften and become deformed.
Yeah this looks very different from my CH scoop as well. I can see why you don't like it.
snackmaster
Well-Known Member
I like the CH scoop and that one looks pretty normal to me. Intact ones on left are from CH and the shortened ones are from Amazon. Finishing on the knockoffs actually looks slightly better?
feralcomprehension
Qualified Observer
It's the genuine article; got it during BF '21.
Glad y'all like yours; I made one from a stainless tube that's much nicer imo (jammed one of those S&B brushes in the opposite end for a combo brush-n-scoop).
Glad y'all like yours; I made one from a stainless tube that's much nicer imo (jammed one of those S&B brushes in the opposite end for a combo brush-n-scoop).
TheHerbPuffer
Well-Known Member
Sorry to be that guy but how do I put a handle on a BO? Just got this thing today and know nothing about ball vapes, just impulsively ordered it on BF bc always wanted a FP. I got the handle off etsy, it doesn't come apart in two pieces but rather has one slit all the way across. I tried to get help on reddit to no avail so thought I'd try on here. Thanks guys
It sounds a lot like the Dfreez handle, which has a demo video here: https://www.instagram.com/tv/CfTD3dXPtcV/?utm_source=ig_web_copy_link
TheHerbPuffer
Well-Known Member
Absolutely amazing! I can always count on FC to come through in no time. Miss this site; thank you!!!
GratefulDread
Well-Known Member
Dam.. 102$ CAD import fees on my B1 setup. Never had import fees with them in the past. That stings 
checkyourlibido
Well-Known Member
Holy guacamole. That’s 2 Pinkies!
Edit: just realized I’m on the CH thread. To clarify, I do love every one of my CH products, no regrets.
Edit: just realized I’m on the CH thread. To clarify, I do love every one of my CH products, no regrets.