checkyourlibido
Well-Known Member
I prefer the B1 as well. I love the shovelhead bowl.
Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer
- Thread starter natural farmer
- Start date
cvs8floz
Well-Known Member
Same here, I just ordered the new $12 CH glass bowl to see how it compares to the PlusPlus one. I am almost 100% glass all the time but broke out the Shovelhead bowl last night to test with the AliExpress titanium injector head (hated it) and later the B1. I find you actually get more hits with the metal bowl, it also holds more material but the taste is just not to my liking, there is a faint metallic taste in every hit. Will stick with the B1 and PlusPlus bowl for now, every other style/material setup I have tried can't match it.
RustyOldNail
SEARCH for the treasure...
Should I have gotten the carb cap for the B1? I was already stretching my budget so I really didn't want to but now I'm wondering. I have the old plunger looking carb cap that they sold when they were NewVape but I'm assuming it's incompatible with the B1:
Edit: I don't do dabs, but I like to use it with my Showerhead Flowerpot near the end of the bowl.
I don’t use a carb cap on my B1, but posted a photo and some info a year ago, LINK BELOW:
Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer
Hey nice job on these! Im interested in the 18mm basket screen….. do you just take the standard screen out, and that basket slides right in? if it goes on the post…I didnt see the post sticking out the bottom of your first photo. Does it still mate with 18mm glass? Thanks man. It’s fun. The...
fuckcombustion.com
AND:
Cannabis Hardware (formerly NewVape) FlowerPot Twax Vaporizer
B1 Capped @ 525 today. Nuked .15 Just got the B1 and cap last night. So far, 650 no cap. Only done a few tests. David
fuckcombustion.com
Alligator427
Well-Known Member
Depend of the airflow of your glass. I use mine at the beginning of the hit with a very airflow open bubbler. Try first without.Should I have gotten the carb cap for the B1? I was already stretching my budget so I really didn't want to but now I'm wondering. I have the old plunger looking carb cap that they sold when they were NewVape but I'm assuming it's incompatible with the B1:
Edit: I don't do dabs, but I like to use it with my Showerhead Flowerpot near the end of the bowl.
Hummm, I have a strange thing with my flowerpot. I have not used it since maybe 1-3 months. Yesteday, I vape with it and found the vape a little bit aggressiv. It milk faster and harder than what I remember with exactly the same glass and same way to vape. I decrease the temperature by 2°F and after by 5 and finally by 10. My old spot was at 523 and now I am at around 470 a. I am a little bit confuse.
SquirrelMaster
Well-Known Member
Ambient temperature change?
greenganja
Well-Known Member
I Had some friends come over to visit last night. One of the friends had inquired about (what is that contraption, were his exact words) the flowerpot. I turned it on and let it warm up to show them how it works. Loaded a bowl of Ghost OG, and off to the races. They said that they had never used a vape that could produce that strong of a hit. One of the friends was so impressed that he didn't even care how much it cost to get one, he said he is going to get one regardless of the price, lol. I gave him two or three different options of where to buy and gave him the pricing. Converted another smoker over to the vape side through this wonderful tool.
Alligator427
Well-Known Member
Ambient temperature change yes, but It will not decrease my vap spot temperature from 35°F
Thick Vape
In the Ballpark
I have this impression too sometimes. It is like the PID would heat up to a somewhat different temp at each restart.
I have this with all PID vapes (all brands I tried). Somehow the ABV gets darker sometimes with the same glass, weed, vape, temp.
Maybe it is just in my head. I should install a temp reading bowl or something to verify.
First thing is of course to check for a constant steady connection from the PID coil to the vape.
EarthworldTim
Well-Known Member
I believe all the PIDs have an auto calibration. Usually by holding the right arrow down for some time and it will start blinking and go +/- a certain number of degrees from whatever the set temp is. Might be worth trying if you're noticing inconsistent performance with same variables.
Hey what kind of glass would you guys recommend to use with this thing? I'm about to pull the trigger on a B1 injector kit from VGoodiez and I was thinking of grabbing this https://vgoodiez.com/collections/holiday30/products/orb-v2-by-vgoodiez?variant=43032462131434 to go along with it.
GratefulDread
Well-Known Member
That is a very stable water piece that works a treat.
redrum891
Well-Known Member
You use a whip for the flowerpot? I have a freezepipe klein recycler that I use a whip on for my volcano hybrid, I plan on buying a flowerpot and debating if I should use a whip until my new mouthpiece comes(glycerin mouth piece is a lot of work, taking out freezer and holding it etc) but I have a matrix sidecar and feel maybe the flowerpot may sit too close to my face?...
nvm, I see some designs on drop down adapters that looks like it would work. Anyone using an adapter on a sidecar?
These would work to get FP further from your face, just have to get the right one to suit,
20 Styles Drop Down 10mm To 14mm 18mm Glass Dropdown Dorp Downstem 90 Degree Angle Female To Male To Female From Allaccessary, $3.05 | DHgate.Com
DHgate.com is an online wholesale seller, providing many kinds of 20 styles drop down 10mm to 14mm 18mm glass dropdown dorp downstem 90 degree angle female to male to female at cheap price, best quality and 7/24 online service.
www.dhgate.com
I use a 18 to 14 GonG in the sidecar to raise my 14 to 18mm drop-down enough to clear the side of the can.
blackstone
Well-Known Member
Besides the things that others have suggested, I wonder if it could also be from using different material, grind or humidity and cure level?
Something like that might also happen me with a clogged or oily screen, a higher water level, or if I just get lucky and load it a bit thickly in the right places. Any extra restrictions will slow draw and increase clouds. (Does your Flowerpot contain balls that may need cleaning?)
Dusty stuff with lots of kief can also do it.
Maybe you were holding the head on the bowl a little sideways before, or had another slight air leak, or indeed a slightly loosely fitted coil in head would explain it, as it might easily happen on these.
Perhaps our lungs get slightly stronger or weaker at different times in our lives too!?
I recently fine tuned mine about 7 to 10 deg. Celcius, I think different material and humidity level of material play a big part in this.
And some strains and quality materials can give bigger clouds..
GratefulDread
Well-Known Member
Do you happen to have any videos of it in action, or a link to one? I've searched but can't find any.
@redrum891 Never used a whip with the Flowerpot, I just like the shape and size of that one, and the removable mouthpiece.
I've been using a D020-D from Sunshinestore on DHGate for like 5 years which has been a great all rounder, but I'd like something slightly bigger for my Flowerpot.
Last edited:
redrum891
Well-Known Member
Nope, hopefully soon though !
my klein
added too much water but still won't splash, i can put a whip on it
how much i use for vapin
Alligator427
Well-Known Member
My flowerpot had an equal perfomance until now for the same temperature. And the change is not few degree F, but 55°F. Maybe I made a special combo on the PID that changed something. Or something happen in the PID or the coil sensor ....
SquirrelMaster
Well-Known Member
Between summer and winter my PID needs to be adjusted by roughly 50°F depending on how cold it is my garage. That's a big ambient temperature swing though.Ambient temperature change yes, but It will not decrease my vap spot temperature from 35°F
Alligator427
Well-Known Member
I never changed my spot without changing the head of the my flowerpot (I have it since 3 years). Here, it is colder. I should increase the temperature, not lowered it.
And I was wrong : it is not 35°F but 55°C less.
shaolinmilk
Well-Known Member
The last vape I picked up was the E-Nano XL and it was just for fun to add to my collection.
I'm now going back to one of my top vapes, the FP.
I believe I have the old ShowerHead and the head before that (I forgot the name of it - the bowl is made of glass for dabs).
If I want to upgrade, what do I need to get? What is the next best thing? I see B0, B1, B2 and it's confusing to me.
Back then, I was supposed to upgrade to the VROD, but it doesn't look like that's available anymore.
I need something that will be compatible with my 2017/2018 model.
I'm now going back to one of my top vapes, the FP.
I believe I have the old ShowerHead and the head before that (I forgot the name of it - the bowl is made of glass for dabs).
If I want to upgrade, what do I need to get? What is the next best thing? I see B0, B1, B2 and it's confusing to me.
Back then, I was supposed to upgrade to the VROD, but it doesn't look like that's available anymore.
I need something that will be compatible with my 2017/2018 model.
Last edited:
bizwaxzion
Enigmatic Cannabist
The "Ball" series are what you are after (B2 is the current vrod). If you want to retain a "dab" head - get a B2 setup (this may call for a new coil due to the internal milling of the vrod head, maybe someone else can confirm) or if flower only is your interest get a B1 (uses standard 20mm coil). Both of those can leverage your current 22mm bowl. The B0 (and optional injector diffusers for B1 & B2 heads) allow use of now popular injector bowls which have the diffuser sit inside the bowl vs over the top of it.
Letaps Stash
Active Member
Changes in ambient temperature does change the PID setpoint slightly along with flower moisture content, grind, and pack density.
During storage if you dropped it, or moved the handle causing the coil positioning to change tighter or looser around center post can really change the heat exchange and temp settings.
Also I noticed I prefer slightly different settings, about +/- 8F, with different flowers and grind consistency. As long as your enjoying it and satisfied with the extraction, its all good.
shaolinmilk
Well-Known Member
Thanks a lot for this info!
Can someone please confirm if I need to purchase a new coil?
I'd just call them and ask or otherwise ask directly. CH (or @VGOODIEZ will set you straight. Trust the experts on this stuff.
In other news, I have found another pabtheon of pairings: B0 and Rick Barry Bird Milkballs. Holy shit the scalloped one is killer. Using a @VGOODIEZ drop-down to 18mm Female.
Stock photo below.