Arizer Solo 3

Pukka

Well-Known Member
You can always cram some steel wool in the heater and try scraping it off. Good luck.
I like aluminum wool over steel, it's softer and generally doesn't scratch. Usually available alongside the steel wool. I'll also stuff an ISO soaked cotton ball in a down side up oven and let it vegitate a bit before scraping with an orange stick (wooden cutical tool). The ISO usually softens things up enough to just wipe away.
 

vink

Member
I agree, it has some mouth and throat drying qualities. For me it helps not to hit every bowl natively, instead I throw some bong rips in between.

Yesterday a friend of mine was showing me his harvest of 8 (!) strains. Knowing that this would dry my respiratory system hard, I brought my small bong to his place. We’ve been hitting this thing all night with the S3, no drying issues at all.
Yeah I hit it natively, don’t really want to use a bong. I am wondering if 3d, dimpled stems and /or a bcg coarse grind may help…

I do, yes. It’s been my experience that the coarser the grind, the more airflow I get, the faster I can extract the bowl.

Can’t comment on the plates as I own a 2 piece grinder - I prefer them wider rather than taller, and I just grind until it hits a consistency I’m happy with. Try it for yourself! Grind it just enough to break the material up and no further, then load it and see how you get on :)
Would you say corser grinds help to get it less dry for the mouth? I find the solo 3 is really drying my mouth and throat, even at 370
 

TigoleBitties

Big and Bouncy
Would you say corser grinds help to get it less dry for the mouth? I find the solo 3 is really drying my mouth and throat, even at 370
That could help. Or maybe flower with a bit more moisture too. The Solo can handle little hand-torn nuggets as well to see if a coarser "grind" helps. There's a pic of a nice long stem with a u-bend from GVB that I use for cooling a few posts back that makes things easy on my throat.
 

chillAtGVC

Well-Known Member
I do drink water when using the S3 or Venty, up to a glass per bowl. Some of this, especially the after effects, is strain dependent. I have around 20 on the go now. I almost always get it, but some are much worse than others. I've tried with a bong and a water filled bubbler but felt that it muted the taste more than helped with the dryness for me.
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)

Pricey because of the style collaboration with colors, but this is so effective for smooth hits:

Also the toad stems will fit solo, a little looser, which I think can be great if you want to be able to remove and clear hits easily, it still fits tight enough for use... I have 18 mm WPA this way and I love it!

There are straight stems too but these are my favorite because you get to keep the vape upside down so nothing can spill, you can grind any which way, and have more air flow with mesh screens and no glass holes
 

vink

Member
Pricey because of the style collaboration with colors, but this is so effective for smooth hits:

Also the toad stems will fit solo, a little looser, which I think can be great if you want to be able to remove and clear hits easily, it still fits tight enough for use... I have 18 mm WPA this way and I love it!

There are straight stems too but these are my favorite because you get to keep the vape upside down so nothing can spill, you can grind any which way, and have more air flow with mesh screens and no glass holes
Yeah but to pricy for my liking. Have you tried the 3d flow stem?
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Yeah but to pricy for my liking.

Yeah they are more examples to keep an eye out, I keep telling him to make the cheap clear versions too but they're not as fun, at least simple color options that could be cheaper than the bigger collab and such... Also WPA, he's been trimming a lot of bud lately and hasn't been able to work on glass again yet however, I'll let everyone know here when more are available! Hopefully variety

Have you tried the 3d flow stem?

No I wanted to try the 420 EDC stems, but I'm not sure there is any reason for me too now lol 3D flow is just simple spiked stem? I'm not sure what else features it has, but that at least does not cool enough for me
 

eyevape

👀
Okay, I knew that the S3 is a quite powerful device, but wtf? 😳 😂

Fine grind, stem fully packed, compressing the herb for 2mm space. Started session mode at 220C, hitting it hard on my 40cm bong (sorry imperial folks). After a while of hitting I saw the vapor changing like I’m combusting af, but I didn’t believe it and kept on going. A second later the taste confirmed the observation.

I thought the herb has touched the oven due to decompression, but it hasn’t. This was simply too much power for maybe too dry material. I totally didn’t expect that to happen, in fact I didn’t consider the S3 to be capable to combust at all, at least without the oven touching the herb. Anyone else have experienced this?

 
Last edited:

TigoleBitties

Big and Bouncy
Okay, I knew that the S3 is a quite powerful device, but wtf? 😳 😂

Fine grind, stem fully packed, compressing the herb for 2mm space. Started session mode at 220C, hitting it hard on my 40cm bong. After a while of hitting I saw the vapor changing like I’m combusting af, but I didn’t believe it and kept on going. A second later the taste confirmed the observation.

I thought the herb has touched the oven due to decompression, but it hasn’t. This was simply too much power for maybe too dry material. I totally didn’t expect that to happen, in fact I didn’t consider the S3 to be capable to combust without the oven touching the herb. Anyone else have experienced this?

Wow. I've never actually used mine at max temp because I've never felt the need. Even with concentrates I never went beyond 210C.

If the flower was dry and compacted as you say with a fine grind then yes, I could see this happening. If you're pulling hard against dense material, the superheated air has nowhere to go and the flower will combust if it's dry enough. We know the oven surface itself must be >>220C and with barely any distance for the air to cool coupled with the glass conducting more and more heat...

But yikes... I also didn't know the hottest setting was that powerful.
 

eyevape

👀
@eyevape I've run mine at 220C but it gets a bit dark for my tastes. But it never actually lit it on fire! I'd contact Arizer. Their support is top-notch. My uninformed guess is that something is wrong with the temperature sensor.
I have been running mine at 220C too, never combusted without oven contact. I’ll be observing this, reaching out to the seller if this happens again. Good to know that I won’t be left alone in case this is an issue.

Wow. I've never actually used mine at max temp because I've never felt the need. Even with concentrates I never went beyond 210C.

If the flower was dry and compacted as you say with a fine grind then yes, I could see this happening. If you're pulling hard against dense material, the superheated air has nowhere to go and the flower will combust if it's dry enough. We know the oven surface itself must be >>220C and with barely any distance for the air to cool coupled with the glass conducting more and more heat...

But yikes... I also didn't know the hottest setting was that powerful.
Usually I like to take the terps off at 180-200C before going to 220C for full extraction. The times when I started my session at 220C I used whole nugs. My theory about the dry, fine material is the same as yours. Let’s hope we’re right on that, as I don’t want to give away my S3 for one single day.
 
Last edited:

Rodney

Well-Known Member
I have not combusted with the solo 3 yet BUT I did get a few white specks one time when I just kept hitting it and hitting it to see how much it could take but it did not combust. I use mine exclusively inverted and and any time I put it down I do so horizontal. I use mine at 220C

One thing I did notice is that the screen does not always sit right as it expands when it is heated i think and it pops up sometimes causing some material to get into the oven. This only really happens after i do a clean of it all but after a few use the screen does not move.

It is deffo a very powerful vape but i found that even when material gets into the heater it still does not combust.
 

PrematureEvaporation

Well-Known Member
Would you say corser grinds help to get it less dry for the mouth? I find the solo 3 is really drying my mouth and throat, even at 370

Super coarse grind or bits of nugs definitely helps keep things easier on the throat and chest. You want to keep that airflow as open as you can. I’d also try to mix up your use with another device or some glassware as well. The S3 is incredibly testing on the throat if you’re only doing native hits regularly. I’m really hoping inverted comes through with a game changing cooling stem, this is simply a different beast to previous Arizer and I think the stems are needing a generational upgrade themselves.


@eyevape how the fuck?! I can’t lie that’s pretty impressive, you’re pushing that guy to the absolute limits! I’d agree that it’s more likely over packing causing excessive heat build up than it is a faulty device. But hey, at least we know it’s possible and the S3 is really that powerful.

Speaking of power, I’m quite lazy with cleaning and found another use for the power in times of a weed drought. If you put the empty dirty stem in and put on 220c session mode, you can vape the reclaim in the stem and get fairly medicated in a pinch ;) I was getting some pretty decent clouds too, was surprising. It won’t vape it clean obviously so you’ll still need to clean it eventually
 
Last edited:

PrematureEvaporation

Well-Known Member
I usually vape around 185c and sometimes go to 195c.
With a bong I go to 205 and sometimes 215-220.
I've never had a burn.
Even at 220 degrees it turns dark brown for me... but not black
I think it’s the airflow as much as the temp which decides how dark the roast is. If I pack a light bowl and a tight bowl and both run at 220c the tight bowl will be darker every time. The vapour is also noticeably hotter

If I detect a bit of airflow restriction and it’s not too significant to justify a repack, I’ll often drop down a preset (10c) which will counteract the increased heat levels the tighter pack will cause
 
Last edited:

eyevape

👀
@eyevape how the fuck?! I can’t lie that’s pretty impressive, you’re pushing that guy to the absolute limits! I’d agree that it’s more likely over packing causing excessive heat build up than it is a faulty device. But hey, at least we know it’s possible and the S3 is really that powerful.
How the fuck, that’s exactly what I thought 😄 Today I had one nug, one ground bowl native and one through water, different weed, all starting at 200C, everything normal so far. I checked the other weed again, it’s paper dry really. So I don’t blame the device, although I’m impressed by the power it delivers.

Speaking of power, I’m quite lazy with cleaning and found another use for the power in times of a weed drought. If you put the empty dirty stem in and put on 220c session mode, you can vape the reclaim in the stem and get fairly medicated in a pinch ;) I was getting some pretty decent clouds too, was surprising. It won’t vape it clean obviously so you’ll still need to clean it eventually
How’s the taste? This sounds like something I’d definitely try when out of weed, hash and keef - in this order. Probably your cooling stem is the better option as it has a bigger surface area than my straight and bent stems. But in times of need, the devil eats shit 😄
 

PrematureEvaporation

Well-Known Member
You still get weed droughts? Feels like it's a constant deluge these days 😂

people just do nothing GIF by KuruptFM


“If you’re listening we need draw. Any draw will do. Weed, hash, shit holiday draw”

People just do nothing for those who don’t get the reference. Very funny show!
 
PrematureEvaporation,
  • Haha
Reactions: simba

Dankvinci

Well-Known Member
Good afternoon everyone. I've had the solo III for a couple of weeks and I absolutly love the terps I get out of it. But it doesn't blow clouds like I see people getting online. I vape at around 375f. I've even heat sunk the oven a bit before vaping. Also I've been using a course grind. I'm taking in the account that because of the little draw resistance the solo III has that a courser grind will have more surface area to vape. I'm now going to try a fine grind. Also all of my cannabis is around 60% humidity.

I actually have a Solo 3 for testing. I also have numerous other vaporizers (Crafty, Mighty, Mighty+, Venty, Firefly 2, Arizer Air Max, DaVinci IQ2, multiple Dynavaps, Tempest). I always liked the dependability and predicatbility of the S&B vaporizers. However every other one has it it’s strengths and I switch between them based on how I feel. With all that being said, I was very impresesed with the Solo 3.

The quality of the device is outstanding and it does feel premium. Size wise, even if it cannot compete with the Arizer Air Max, it still remains extremely portable. I personally find it much better to handle than for example the Venty.

So far I have only used it a couple of times in on demand mode and it literally rocked my world so to speak. I used the XL tube and around .25g herb very lightly packed. While airflow wise it will not get close to a Mighty+ let’s say, the airflow is definitely better than the Air Max. But where this thing shines and literally blew my mind is taste and flavour / fullness. I would say that at this point it is the best device from that perspective from the ones I own.

With the Venty for example, same herb qty. and same temp around 180C, with a full lung inhale I do get the ‘Bickle tickle’ and end up coughing mostly from the vapour concentration and temp. With the Solo 3 I will cough significantly because of how much more terpier the hits are. If you are a flavour chaser, you will love this one. It is almost in a class of it’s own. And the flavour is there with almost no deterioration for a few hits, more than let’s say with the Venty.

Herb wise, I was surprised how evenly cooked it is at the end with a beautiful golden brown colour.

This will definitely be my main device for the next few weeks until I get a better feel and see how it performs in warmer temperatures as the weather gets better.

I will try to post from time to time as I use it and get used to it. One thing is clear, Arizer did and excellent job with this one, IMHO they have a winner.

P.S. they should have called this one Terpy Max instead of Solo 3 😝


As per my previous post I can tell you this is a bit different with a Solo 3. The new heater/oven size and XL tube takes care of that. For me it hits as good as a Venty for example but with much more terpier hits.
great intro review, I've had it for a week or two, I get insaneterp production, but I can't get clouds. I use the small aroma tube, vape it at 375F course grind.
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
I'm taking in the account that because of the little draw resistance the solo III has that a courser grind will have more surface area to vape. I'm now going to try a fine grind

I think your logic is backwards here, fine grind has more surface area, and does better with the conduction hybrid here, which is a great way to get thicker vapor faster, although taste might suffer comparatively... I even use lower temps too and have no problem with clouds, try on demand mode?
 
Top Bottom