Anvil by Vestratto

PaperClouds

Well-Known Member
I'm not sure if anyone else wants to see this but, I was testing out the Anvils heat retention tonight in a couple ways.

The first with waiting 10s to take the first hit then 10s after every subsequent hit. I was able to get vapor for about 57s.

The second way is by waiting 30s to take the initial hit then just drawing at a natural pace which ended up being 10-12s in between each breath. I was able to get vapor for about a 1:12 after the click, or about 43s of actual vaping after waiting 30s.
 

TeaCup

Well-Known Member
@PlanetHaze : For the love of god, please do a WEEKEND pre-order drop.

Been following, don't think I remember these questions, apologize if it's been said.......

1. Draw resistance? Can you pack it with a good firm tamp to get more draw restriction, or will it not like that?
2. Vapor temps when using natively? I don't own a DynaVap so I've never looked into how people cool there's when not using water. Not a water user.
3. Flavor when not inducing a black pile of death?

I'm really trying to get a feel for how nuanced this can be, clearly we can see that it handles full steam ahead. I don't need to be hit over the head with a sledgehammer on every hit, can it handle long drawn out hits with a little subtlety? Even the video where someone was hitting it like a Dyna, it looked like they were very very short hits because the vapor was just pouring out. Id like to hit it like a long peaceful joint hit and not have to exhale after 2 seconds because I'm choking on vapor right from the outset. After a few type of those hits, then you can bang away. 🔨
 

Zuhdj

Charles Mingus
@PlanetHaze : For the love of god, please do a WEEKEND pre-order drop.

Been following, don't think I remember these questions, apologize if it's been said.......

1. Draw resistance? Can you pack it with a good firm tamp to get more draw restriction, or will it not like that?
2. Vapor temps when using natively? I don't own a DynaVap so I've never looked into how people cool there's when not using water. Not a water user.
3. Flavor when not inducing a black pile of death?

I'm really trying to get a feel for how nuanced this can be, clearly we can see that it handles full steam ahead. I don't need to be hit over the head with a sledgehammer on every hit, can it handle long drawn out hits with a little subtlety? Even the video where someone was hitting it like a Dyna, it looked like they were very very short hits because the vapor was just pouring out. Id like to hit it like a long peaceful joint hit and not have to exhale after 2 seconds because I'm choking on vapor right from the outset. After a few type of those hits, then you can bang away. 🔨
I'm really hoping these will ship out before the 19th of December. I think it would be a good device to travel with given the lack of battery and it seems easy to clean all the way. Plus it seems to be top tier
 

PaperClouds

Well-Known Member
I don’t remember if this has been discussed already, my apologies if I missed, but it looks like there is a visual cue at top of cap when it clicks.
So no tactile signal, but an audio and visual one?
I noticed it on both of @PaperClouds videos above, or am I seeing things?

And @PaperClouds - you are going above and beyond! Thanks so much for all the :science:

You are not seeing things, you can actually see the little disc click inside of the hole on the top of the bowl when it’s ready.


@PlanetHaze : For the love of god, please do a WEEKEND pre-order drop.

Been following, don't think I remember these questions, apologize if it's been said.......

1. Draw resistance? Can you pack it with a good firm tamp to get more draw restriction, or will it not like that?
2. Vapor temps when using natively? I don't own a DynaVap so I've never looked into how people cool there's when not using water. Not a water user.
3. Flavor when not inducing a black pile of death?

I'm really trying to get a feel for how nuanced this can be, clearly we can see that it handles full steam ahead. I don't need to be hit over the head with a sledgehammer on every hit, can it handle long drawn out hits with a little subtlety? Even the video where someone was hitting it like a Dyna, it looked like they were very very short hits because the vapor was just pouring out. Id like to hit it like a long peaceful joint hit and not have to exhale after 2 seconds because I'm choking on vapor right from the outset. After a few type of those hits, then you can bang away. 🔨

To answer your questions.

1. I really love the draw resistance on this thing it’s not too airy but also not too restricted. You can pack it literally however you want and it works. There is actually a way to adjust the airflow on the unit as well but I love it set too “wide open”.

2. The vapor temps solely depend on where you heat it. This thing can feel “harsh” in the same way any heavy can feel harsh, from the sheer volume of vapor that I can put it. I’ve never felt a “burny” sensation that I’ve gotten from some conduction vapes.

3. Flavor is nice at low temps, not on par with a low temp 510 vape but also not devoid of terps either. My buddy compared the the taste to a Sublimator.

Im right there with you with not always wanting to be bring down the hammer with every hit. As far as hitting it with subtlety, you can really hit this thing however you want. Small, light, low temp sips or chong it all in one hit there really is no breathing technique or wrong way to hit this thing. The post of mine above displays some of the variability you can achieve with its heat retention. There’s post I made back there that also shows the spectrum of ABV you can achieve.
 

PlanetHaze

Don't Vaporize The Planet !, Vaporize Yourself
Retailer
@PlanetHaze : For the love of god, please do a WEEKEND pre-order drop.

Been following, don't think I remember these questions, apologize if it's been said.......

1. Draw resistance? Can you pack it with a good firm tamp to get more draw restriction, or will it not like that?
2. Vapor temps when using natively? I don't own a DynaVap so I've never looked into how people cool there's when not using water. Not a water user.
3. Flavor when not inducing a black pile of death?

I'm really trying to get a feel for how nuanced this can be, clearly we can see that it handles full steam ahead. I don't need to be hit over the head with a sledgehammer on every hit, can it handle long drawn out hits with a little subtlety? Even the video where someone was hitting it like a Dyna, it looked like they were very very short hits because the vapor was just pouring out. Id like to hit it like a long peaceful joint hit and not have to exhale after 2 seconds because I'm choking on vapor right from the outset. After a few type of those hits, then you can bang away. 🔨
Time is of the essence with the pre-order to have them ship in time to avoid the Christmas shipping crush. The pre-order will go live at the earliest time possible. We aren't going to delay the pre-order by possibly a week just to wait for a weekend. Everyone has a phone to receive notifications on and can order from basically anywhere they are.

The Anvil has True Airflow control, you can adjust the amount of air entering the vape, not diluting the vapor after vaporization. If you want to pack it tight, just open up the airflow all the way.

The Anvil can hold a lot of heat in a small form factor hence the heat shield. First draws start to get hot after a long draw, back 2 back hits without a cool off could be too warm for some, no different than all vapes with this type of form factor. The Anvil was developed to fully extract in one hit, it hits hard and fast. For the usage style you describe "a long peaceful joint hit", the Anvil can do it, but that's not its foray. That would be like buying a dragster to drive grandma to church on Sundays :lol: The Anvil doesn't know slow, once it clicks, it's go time....hang on!


I'm really hoping these will ship out before the 19th of December. I think it would be a good device to travel with given the lack of battery and it seems easy to clean all the way. Plus it seems to be top tier
Yes, they should ship way before the 19th of December. Hoping all pre-ordered Anvils shipped to North American addresses will already be delivered by then. Every part of the Anvil can be ISO washed, in fact the aluminum cigar tube type case we are making for it allows you to fill it with ISO, put the Anvil in and shake it clean. The case also allows you to put the Anvil away while still hot, a true hit it and go vape. Aluminum cases will not be ready at pre-order time. :peace:
 

Zuhdj

Charles Mingus
Time is of the essence with the pre-order to have them ship in time to avoid the Christmas shipping crush. The pre-order will go live at the earliest time possible. We aren't going to delay the pre-order by possibly a week just to wait for a weekend. Everyone has a phone to receive notifications on and can order from basically anywhere they are.

The Anvil has True Airflow control, you can adjust the amount of air entering the vape, not diluting the vapor after vaporization. If you want to pack it tight, just open up the airflow all the way.

The Anvil can hold a lot of heat in a small form factor hence the heat shield. First draws start to get hot after a long draw, back 2 back hits without a cool off could be too warm for some, no different than all vapes with this type of form factor. The Anvil was developed to fully extract in one hit, it hits hard and fast. For the usage style you describe "a long peaceful joint hit", the Anvil can do it, but that's not its foray. That would be like buying a dragster to drive grandma to church on Sundays :lol: The Anvil doesn't know slow, once it clicks, it's go time....hang on!



Yes, they should ship way before the 19th of December. Hoping all pre-ordered Anvils shipped to North American addresses will already be delivered by then. Every part of the Anvil can be ISO washed, in fact the aluminum cigar tube type case we are making for it allows you to fill it with ISO, put the Anvil in and shake it clean. The case also allows you to put the Anvil away while still hot, a true hit it and go vape. Aluminum cases will not be ready at pre-order time. :peace:
I'm so stoked for this! It's gonna be perfect for Christmas time :)
 

hoyo77

Well-Known Member
Yes, that's what we had in mind too :tup:



Since the Anvil chamber threads are on the bottom, a revolver design could work, but I wouldn't want that big bulky thing in my pocket all day :2c:
I agree way to bulky for pocket use but a good start for a design idea.
 

TeaCup

Well-Known Member
Everyone has a phone to receive notifications on and can order from basically anywhere they are.

Ugh, I've wandered back into the Firewood and Tetra threads, lol.

The Anvil can hold a lot of heat in a small form factor hence the heat shield. First draws start to get hot after a long draw, back 2 back hits without a cool off could be too warm for some, no different than all vapes with this type of form factor. The Anvil was developed to fully extract in one hit, it hits hard and fast. For the usage style you describe "a long peaceful joint hit", the Anvil can do it, but that's not its foray.

I have no experience with these type of vapes so I'll wait to see what kind of modding people can do with these. Thanks, still interested, just not quite as much. :smug:
 
TeaCup,

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Progress Update:
Heat shields are almost finished and while those are being finished we are making some Helix chambers in hopes they will be ready for the pre-order launch. These are the latest versions of the Helix.

View attachment 14476

That's awesome, yeah I would love to get I think just the half chamber helix included for pre-order with both of the terp chambers...
 

PlanetHaze

Don't Vaporize The Planet !, Vaporize Yourself
Retailer
Heck, just get those carrying cases machined while you’re at it ; )

looking good; can’t wait!
The cases need a lot of machine time, but are also in the early stages of production. :drool:


Checking my email every few hours... Got me holding off on black Friday sales too😬
Thanks for your patience, shouldn't be too much longer. We can't wait to get these in FC members hands. Don't forget pre-order availability will be announced here a few hours before they go live to give everyone more advance notice. :zzz:


If they're ready would they be included in the preorder or separate?
That's awesome, yeah I would love to get I think just the half chamber helix included for pre-order with both of the terp chambers...
The pre-order contents and pricing have already been set. Pre-order contents are listed on post #76 https://fuckcombustion.com/threads/anvil-by-vestratto.51804/post-1605946 and on the Anvil Web Page.

We are trying to have extra Terp Chambers and some Helix Chambers available when the pre-order goes live. :rockon:
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
The cases need a lot of machine time, but are also in the early stages of production. :drool:



Thanks for your patience, shouldn't be too much longer. We can't wait to get these in FC members hands. Don't forget pre-order availability will be announced here a few hours before they go live to give everyone more advance notice. :zzz:




The pre-order contents and pricing have already been set. Pre-order contents are listed on post #76 https://fuckcombustion.com/threads/anvil-by-vestratto.51804/post-1605946 and on the Anvil Web Page.

We are trying to have extra Terp Chambers and some Helix Chambers available when the pre-order goes live. :rockon:

Perfect, yeah I just meant, the ability to add the half helix chamber to my pre-order :tup:
 

hoyo77

Well-Known Member
Does anyone know if this forum has a notification system?? I dont want to miss the post when pre-orders are ready
 

Shit Snacks

Milaana. Lana. LANA. LANAAAA! (TM2/TP80/BAK/FW9)
Does anyone know if this forum has a notification system?? I dont want to miss the post when pre-orders are ready

Yes go into your settings, there are email notifications, remember there's going to be more, antsy I know though! Good luck bud
 
Shit Snacks,
  • Like
Reactions: Xclerk

Comfortably Numb

Well-Known Member
Has anybody ordered from these guys before? I tried to set up a online account to save time and maybe expedite an order if I am lucky to be in on it when drop is announced. The website locked me out...cant finish setting up a account...cant even log out...when I try I am sent to a website that sets up a firewall for them. I tried to call but found out they are not open on weekends? I cant talk to anyone until next week.
So looks like I may be screwed and will not be able to place a order should the drop happen this weekend.
I have been locked out of doing anything for a couple of hours now and dont expect anything to change soon.
Really disappointed....wish I did not want this so bad...
 
Comfortably Numb,

Bad Dog

Yeah I pissed on the rug...... so what
pretty sure the drop won't be for a bit so I wouldn't worry to much. these things are still being manufactured then they have to be packaged , shipped to the store........ gone be a bit buckle up
 
Top Bottom